December 2009 - App_rpt-users - lists.keekles.org

OT: Network bridgng with Xen
by Ramesh Dhami (VA3UV) 05 Dec '09

05 Dec '09

HI Guys; Yes - way off topic.... I am hoping someone out there in app_rpt land has some knowledge with Xen and network bridging between Dom0 and DomU guests. Please contact me off list if you can help! Thx, Ramesh.

1 0

Odd Splits for Remotes and Memory Channels
by Carl Swanson 05 Dec '09

05 Dec '09

Hello Group... More probing questions for my config files: I was reading through the rpt.conf.sample file I found, and while the memory usage for the TM-G707 remote that Jim NIL gave me was logical, I didn't see any examples of odd-split repeaters being used. Which, brings up my two-part question: Can non-standard split repeaters be loaded into the rpt.conf file? or, in the alternative: Can the G707 be commanded into its own memory mode, and a memory channel be selected to operate? The reason behind this is that I am trying to craft a macro which, when enabled for specific users, would allow the user to transmit and receive to a VHF MARS repeater. One with a very wide (+4 MHz) split. Any thoughts? Carl/K6CRS ___________________________________________ Carl Swanson, CBRE/CEA/CBNT Broadcast Engineer, Dial-Global 24/7 Formats HAM: K6CRS & VE3SSO / GMRS: WPOJ453 / SHIP: WDD5353 GROL w/SRE: PG-GB-03704 / US Army MARS: AAM9ICA/AAR9MM

2 1

compile configs and config files
by George Csahanin 03 Dec '09

03 Dec '09

Has anyone ever looked into what features in the configs (make menuselect) can be turned off and still have a fully functional repeater/remote base? The names of the applications are somewhat mysterious. I just know there's more stuff compiled in than I use. Some of the PBX type stuff, etc, need to be there? Thanks, everyone. GeorgeC node 2360 repeater and 2428 remote base (FT897 with only a whip antenna on the VHF/UHF port)and no PTT...yet George J Csahanin W2DB Cedar Park, TX

1 0

Problem with crashes ticket 0000051
by George Csahanin 03 Dec '09

03 Dec '09

Didn't want to re-open to report my success, but I had downloaded the sources and that was really when it started to fail. But, for grins I did a 'make clean' or 'make distclean', don't remember which. After re-compile works like a champ! Did my "goes anywhere" change to the source for FT897, ID speed and Freq mods, and I'm back in business. Thanks for looking into it. GC George J Csahanin W2DB Cedar Park, TX

1 0

Re: [App_rpt-users] *just for fun* ACID app_rpt usbradio on 64bit Linux / 64bit Centos
by hwstar＠rodgers.sdcoxmail.com 01 Dec '09

01 Dec '09

> > From: Steve Gladden <steve(a)michiganbroadband.com> > Date: 2009/12/01 Tue AM 09:45:34 PST > To: app_rpt <App_rpt-users(a)qrvc.com> > Subject: [App_rpt-users] *just for fun* ACID app_rpt usbradio on 64bit Linux > / 64bit Centos > > Is app_rpt zaptel usbradio and all supported or expected to work/not > work on a 64bit Linux installation? > Is it expected to work / not work? > I tried it just for fun and have not been able to get it to compile. > I need to know if I should be completely avoiding 64bit Linux or if I > should also be trying it out there as well. > > Thanks! > > Steve > > > > > > -- > This message has been scanned for viruses and > dangerous content by MailScanner, and is > believed to be clean. > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)qrvc.com > http://qrvc.com/mailman/listinfo/app_rpt-users > I never tried this myself, and I'd be suprised if there were NO issues. Steve WA6ZFT

1 0

Saving config files in Limey Linux
by Carl Swanson 01 Dec '09

01 Dec '09

Hello group... This might sound like a newb question, but I have been trying to save my changes to the conf files (like rpt.conf, extensions.conf, etc) using nano, and each time I make a change, save it, and then after issuing a reboot to the computer, it comes back up like I hadn't made any changes at all. Is there an explicit "write files to flash" command in Limey Linux that I am missing? 73, Carl, K6CRS ___________________________________________ Carl Swanson, CBRE/CEA/CBNT Broadcast Engineer, Dial-Global 24/7 Formats HAM: K6CRS & VE3SSO / GMRS: WPOJ453 / SHIP: WDD5353 GROL w/SRE: PG-GB-03704 / US Army MARS: AAM9ICA/AAR9MM

2 1

kickstart file to install app_rpt on a XEN VM?
by Ramesh Dhami (VA3UV) 01 Dec '09

01 Dec '09

Hi Guys; I am experimenting with XEN and setting up a VM on a TEST box. I'd like to be able to install app_rpt / ACID by specifying a url for the kickstart file as I setup my VM. I thought I had seen this in one of the repositories, anyone help? Thanks! Ramesh.

2 2