anything that changes in echolink.conf only takes effect on system startup
JIM
> From: david.osborn(a)manx.net
> To: app_rpt-users(a)qrvc.com
> Date: Fri, 1 Oct 2010 19:36:11 +0100
> Subject: [App_rpt-users] EchoLink Deny List
>
> When a callsign is added to the deny list in echolink.conf, what is required
> to make it take effect? Does Asterisk need to be re-started, or is there a
> gentler way?
>
> Thanks
>
> David
> GD4HOZ
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users(a)qrvc.com
> http://qrvc.com/mailman/listinfo/app_rpt-users
When a callsign is added to the deny list in echolink.conf, what is required
to make it take effect? Does Asterisk need to be re-started, or is there a
gentler way?
Thanks
David
GD4HOZ
Hi,
I run the DMK dongles but I wanted a cheap one just to hang a scanner off
and as it didn't require PTT etc no modifications are needed to just pipe
the audio.
So I thought I'd give one of these a go off eBay for AUD$7.48 incl postage.
http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&item=250544991212
Here is my LSUSB.
Bus 002 Device 003: ID 0d8c:000c C-Media Electronics, Inc. Audio Adapter
Bus 002 Device 002: ID 0c45:6270 Microdia PC Camera (SN9C201 +
MI0360/MT9V011 or MI0360SOC/MT9V111) U-CAM PC Camera NE878, Whitcom WHC017,
...
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 0d8c:000c C-Media Electronics, Inc. Audio Adapter
Bus 001 Device 002: ID 0d8c:000c C-Media Electronics, Inc. Audio Adapter
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Two are the real deal (DMK) and the third comes up the same so I assume it
is the correct chip also?
I haven't cracked the case open as I have no need to. However the case is a
translucent black and you can see clearly inside with a torch that it has a
proper square chip with legs (No blob).
I haven't got it going yet as I'm not sure about some of the config side of
things but when I do I'll let you's know if and how well it works.
I also hope to get a couple more DMK dongles when funds allow to add HF and
Full dupe V/UHF dual band nodes.
Anyhow I thought I'd share this source of C-Media dongles as there seems to
be a lot of interest on where to get them from in the mailing list lately.
Regards,
Ken - vk4akp
All_Star #2134 - VK4RKP (Mt Crosby. 146.725Mhz -neg)
Echolink #7878 - VK4RKP (Mt Crosby. 146.725Mhz -neg)
PTT_Link #20040 - UHF CB.
???_??? #???? - .AU Scanner (Coming Soon).
.-.-.
> Message: 1
> Date: Wed, 29 Sep 2010 15:57:10 -0500
> From: "Yokshs" <yokshs(a)sbcglobal.net>
> Subject: [App_rpt-users] DealExtreme CM108 fobs
> To: <app_rpt-users(a)qrvc.com>
> Message-ID: <5D654AD9477340EBBEB4A98DA7ABB957@main>
> Content-Type: text/plain; charset="iso-8859-1"
>
>
> Hi all,
>
> I opened all 4 of the "so called" CM108 units that I bought from
> DealExtreme. The packaging, and plastic cases for each unit are identical,
> but the PCBs are different.
>
> Of 4 units purchased, I ended up with 3 "blob" units, and one CM119 leaded
> unit.
>
> I'm going to send DealExtreme my thoughts in an email/feedback, but I
> doubt they'll replace the units, or refund my $$$.
>
> I was considering using the CM108 fob for audio only anyway, so long as I
> can use serial or parallel for COS/PTT.
>
> Do the CM119 units work with Allstar?
>
> 73.
>
> Kyle
> K0KN
>
