October 2010 - App_rpt-users - lists.keekles.org

Using a Master II
by Corey Dean N3FE 08 Oct '10

08 Oct '10

So I have been using a GE Master II repeater (actual repeater, not a converted mobile) for the allstar node in full duplex repeater mode. I noticed it just doesn't dig too well when using the fob to decode the PL. I have a maxtrac on another fob and that will dig into the noise great. As a test I hooked up a ts32 and ran the output of that in the CAS/COR on the fob and it worked great! I want to try to get the built in decoder working correctly though. Another friend of mine is also running a GE Master II and he is having the same problem. When we run the rxnoise level from either the radio-tune-menu or using the radio tune command from asterisk it always fails. Anyone have any suggestions on a way to resolve this? I have another use for my hardware pl decoder so I would like to get the USB Frob working correctly!!!! Corey N3FE

6 15

No ID During Recorded Playback
by KI6PSP (Ed) 08 Oct '10

08 Oct '10

Maybe I missed something, but for some reason when I play the ARRL Audio News, in either WAV or MP3, it doesn't ID until the whole file is done being played. I attempted to force an ID while it was playing, no result, and when I issued my "Be Quiet" command (Telemetry flush), it reported the following: WA6YBN*CLI> rpt fun 27178 *999 -- Hungup 'Zap/pseudo-591183677' [Oct 8 07:09:34] WARNING[21261]: channel.c:2590 ast_prod: Prodding channel 'Zap/pseudo-1497580540' failed -- Hungup 'Zap/pseudo-1497580540' [Oct 8 07:09:34] WARNING[21264]: channel.c:2590 ast_prod: Prodding channel 'Zap/pseudo-684760799' failed -- Hungup 'Zap/pseudo-684760799' [Oct 8 07:09:34] WARNING[21265]: file.c:677 ast_readaudio_callback: Failed to write frame -- <Zap/pseudo-548946068> Playing 'rpt/goodmorning' (language 'en') [Oct 8 07:09:34] WARNING[21265]: app_rpt.c:7111 sayfile: ast_streamfile rpt/goodmorning failed on Zap/pseudo-548946068 -- Hungup 'Zap/pseudo-548946068' -- Hungup 'Zap/pseudo-1569686642' During the playback, the Identifier state is always "CLEAN" [27178] ; Change this to your assigned node number rxchannel=Radio/usb27178 duplex=1 irxgain=-10 itxgain=10 erxgain=-3 etxgain=3 ;controlstates=controlstates scheduler=schedule27178 morse=morse27178 macro=macro27178 functions=functions27178 phone_functions=functions27178 link_functions=functions27178 telemetry=telemetry wait_times=wait-times context = radio callerid = "WA6YBN RPR" <7603750000> ;idrecording = /var/lib/asterisk/sounds/rpt/nodenames/wa6ybn idrecording=|iWA6YBN accountcode=RADIO hangtime=500 althangtime=750 totime=1200000 idtime=540000 politeid=3000 ;archivedir=/etc/asterisk/qso/ ;monminblocks=2048 startup_macro=*81 idtalkover=|iWA6YBN unlinkedct=ct2 remotect=ct3 linkunkeyct=ct8 nolocallinkct=0 ;irplann=1 eannmode=2 echolinkdefault=0 ;connpgm=yourconnectprogram ;discpgm=yourdisconnectprogram ;lnkactenable=0 ;lnkacttime=1800 ;lnkactmacro=*52 ;lnkacttimerwarn=30seconds ;remote_inact_timeout=1800 ;remote_timeout=3600 nounkeyct=0 ;holdofftelem=0 beaconing=0 voxtimeout=10000 ;Vox timeout in ms voxrecover=2000 ;Vox recover time in ms simplexpatchdelay=25 ;Delay for transmit while in patch in 20 ms increments ; *** Tail Messages *** tailmessagelist=/var/lib/asterisk/sounds/rpt/info tailmessagetime=7200000 ;60 minutes between tail messages tailsquashedtime=600000 ;10 minutes [morse27178] speed=18 frequency=800 amplitude=4096 idfrequency=750 idamplitude=512 This used to ID over the top, but now I don't know what is wrong. Thanks -- KI6PSP (Ed)

1 0

UPD port
by Darril Holland 08 Oct '10

08 Oct '10

On Allstarlink.org -Sever-Sever configuration -Network configuration . What do I need to put in forUPD Port?

1 0

New to Linux
by Darril Holland 07 Oct '10

07 Oct '10

My server resides in min-itx The case it's in has a LCD. I need use a program lcdproc( linux based) to make the lcd work. would this intrefere with my Acid(Centos) or co-excist with it? Darril

1 0

(no subject)
by Tremors834＠aol.com 07 Oct '10

07 Oct '10

Hello All, I'm running a simplex node, the radio itself handles any tone modulation. Its been said that the transmitted audio seems to be a bit too loud. The URI is interfaced to a Kenwood TM271- 2m radio. Wired direct from URI pins 22 (Left AC audio out) and 20 (GRD) to the MIC and GRD pins on the radio mic jack. I don't have any test/calibration equipment but I figured I could lower the Transmitted Audio setting using 'radio-tune-menu'. Problem is that I have the "Set Transmit Voice Level" setting all the way down to 15 (0-999) and the transmit audio still sounds loud. Here is Info from 'radio tune' Output A set to voice Output B set to off TX voice level set to 15 TX tone level set to 200 RX squelch set to 500 I'm wondering if I may need to attenuate the interface line between the URI and Radio. Suggestions anyone? Thanks, Gene KC2WDZ

3 2

Re: [App_rpt-users] Schedule info rpt.conf
by hwstar＠rodgers.sdcoxmail.com 06 Oct '10

06 Oct '10

On Wed, Oct 6, 2010 at 9:39 AM, Randy Ballard wrote: > I am trying to figure the schedule format out i currently have this > 83 = 00 * * * * > which reads the time every hour i would like it to be every hour from > 8 am > to 10 pm > > i tried > 83 = 00 8-22 * * * > dosnt work is this possible > > > ------------------------------ > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)qrvc.com > http://qrvc.com/mailman/listinfo/app_rpt-users It's going to have a problem with the 8-22 part. Dash numbers aren't supported as it's not a full implementation of cron syntax. Unfortunately you have to put in individual entries for 8 through 22. Steve WA6ZFT

1 0

Schedule info rpt.conf
by Randy Ballard 06 Oct '10

06 Oct '10

I am trying to figure the schedule format out i currently have this 83 = 00 * * * * which reads the time every hour i would like it to be every hour from 8 am to 10 pm i tried 83 = 00 8-22 * * * dosnt work is this possible

2 1

Re: [App_rpt-users] NodeShark v0.93 available
by David Osborn 05 Oct '10

05 Oct '10

Keith, You have just posted the answer to my question :-) Bugs aside, thank you very much for this very useful contribution to the AllStar admin's toolkit. Your work is much appreciated. David GD4HOZ Message: 3 Date: Mon, 4 Oct 2010 22:42:09 -0700 From: Keith Williamson <hkwilliamson(a)gmail.com> Subject: [App_rpt-users] NodeShark v0.93 available To: app_rpt users list <app_rpt-users(a)qrvc.com> Message-ID: <AANLkTi=8Q95YU3h+0BN83ztsDsYAG773RQmN6km5W45J(a)mail.gmail.com> Content-Type: text/plain; charset="iso-8859-1" All, I just uploaded v0.93 of NodeShark which fixes a "Nil object exception" that crashes the app if the user specifies an invalid path to the local copy of the archive in his NodeShark preferences. You can download this latest version at http://www.arizuni.com/NodeShark 73's, Keith KF7DRV AllStar: 2541 Echolink: 477448

1 0

App for Android yet? Just want to remote control my node
by Tony KT9AC 05 Oct '10

05 Oct '10

Sorry, I didn't find anything in the archives for an Android client (IAX2, etc). Just would like to connect to my node for control purposes and am a little behind in how this is done. Is this better done by the website? I've converted my node over but not much past that yet. Thanks, Tony

2 1

nodeshark help please
by keith handscombe 05 Oct '10

05 Oct '10

Good morning Followed instructions and after I tested on the Windows 7 Pro (64 bit) pc I received the following error The error for all who don't get the screen shot was Pscp: wildcard '20060822* match no files. Any help would be great please K Handscombe www.handscombe.co.uk

2 1