November 2010 - App_rpt-users - lists.keekles.org

my Allstar Centos system crashed.
by Chuck Henderson 03 Nov '10

03 Nov '10

My Centos system crashed and left a message on the console with the system locked up and not responding on the network. Here is a screen shot of the error, if it might be of any use in determining what caused the crash. http://www.midlandsnetworking.com/Centos-Crash2.jpg Chuck

2 1

Re: [App_rpt-users] cheap USB fobs
by Chuck Henderson 01 Nov '10

01 Nov '10

I have ordered from BestOfferBuy.com twice and they deliver with free shipping in about 12 days. I ordered item E14615 which contains the chip number CM-108 and is slightly easier to solder to than a couple of other usb-fobs that I have ordered from other sources. Another nice thing is that they are not glued so they are easy to pry apart without damaging the plastic case. There are little plastic pins interlocking the 2 halfs so I started prying at the usb connector and slowly worked my way around with my fingernail until I got back to the other side of the usb connector and then did that again and they come apart without breaking the pins so they will go back together without glue or tape. BestOfferBuy.com sells the E14615 for $6.90 each with free (about 12 day) shipping. My order of 4 on Oct 13, 2010 shipped from Hong Kong and arrived in Illinois on Oct 25, 2010 at a total cost $27.60 Here is a URL to the part http://www.bestofferbuy.com/cmedia-cm108-virtual-71surround-usb-20-external… If the URL doesn't work then go to http://www.bestofferbuy.com and search for E14615 Of course as time passes the part could change, but all that they shipped to me were as described. Chuck -----Original Message----- From: app_rpt-users-bounces at qrvc.com [mailto:app_rpt-users-bounces at qrvc.com] On Behalf Of Yokshs Sent: Monday, October 11, 2010 12:41 PM To: app_rpt-users at qrvc.com Subject: Re: [App_rpt-users] cheap USB fobs Hello Pete, Tried replying directly, but the email bounced... The DealExtreme item was SKU# 21812 https://www.dealextreme.com/details.dx/sku.21812 I received 3 "blobs" and one CM119 that seems to be defective. FWIW, it seems like they might be willing to refund my purchase price if I return the items. I'll believe it when my Paypal account grows by $28. hi hi 73. Kyle K0KN ----- Original Message ----- From: "Peter Elke" To: <yokshs Sent: Monday, October 11, 2010 1:56 PM Subject: FW: [App_rpt-users] cheap USB fobs Hi Kyle, Which one did you buy on dealextreme? There seems to be lots of USB audio fobs on there... 73's Pete (WI6H) _______________________________________________ App_rpt-users mailing list App_rpt-users at qrvc.com http://qrvc.com/mailman/listinfo/app_rpt-users

2 2

Re: [App_rpt-users] removing server entries on Portal
by K&R Yoksh 01 Nov '10

01 Nov '10

Figured this one out by myself! hi hi 73. Kyle K0KN

1 0

removing server entries on Portal
by K&R Yoksh 01 Nov '10

01 Nov '10

Hi, I'm trying to get my nodes reconfigured, and don't see a way to remove unused server entries from the Portal. I mistakenly created one server for each node I have. At this time, I only need 2 servers. Any ideas? Thanks. 73 Kyle K0KN

2 1

usbradio.conf sample file for IRLP boards
by K&R Yoksh 01 Nov '10

01 Nov '10

Hi all, I thought I'd pass along a working usbradio.conf for anyone trying to get an IRLP board going on Asterisk. Consider this file to be a template to get started with. I haven't managed to get the AUX 1,2,3 outputs going yet, but PTT and COS seem to be working FB. My node radios have built-in PL squelch, which I'm using at the moment. I'm also using the software DTMF decoder. At this point, I'm using an unmodified CM108 fob and my homebrew IRLP board. 73. Kyle K0KN ; ; Usbradio channel driver Configuration File ; [general] [usb2210] ; IRLP board support pp3 = ptt ; out0, out1 or ptt ; pp10 = in ; in, cor or ctcss ; pp12 = in ; pins 10,12,13,15 are for DTMF ; pp13 = in ; pp15 = in pp11 = cor ; pp4 = out0 ; pins 4,5,6 are AUX 1,2,3, default off ; pp5 = out0 ; pp6 = out0 hdwtype=0 rxboost=1 txboost=1 rxctcssrelax=1 txctcssdefault=100.0 rxctcssfreqs=100.0 txctcssfreqs=100.0 rxctcssoverride=0 ;carrierfrom=dsp carrierfrom=ppinvert ;ctcssfrom=dsp ;ctcssfrom=pp rxdemod=flat txprelim=yes txlimonly=no txtoctype=notone txmixa=composite txmixb=no invertptt=0 duplex=0 rxondelay=0 rxnoisefiltype=0 eeprom=0 #includeifexists custom/usbradio.conf

4 3

Re: [App_rpt-users] usbradio.conf sample file for IRLP boards (plain text)
by K&R Yoksh 01 Nov '10

01 Nov '10

Hopefully, this time our email programs don't mangle the config. I apologize for the excess bandwidth! 73. Kyle K0KN ; ; Usbradio channel driver Configuration File ; [general] [usb2210] ; IRLP board support pp3 = ptt ; out0, out1 or ptt ; pp10 = in ; in, cor or ctcss ; pp12 = in ; pins 10,12,13,15 are for DTMF ; pp13 = in ; pp15 = in pp11 = cor ; pp4 = out0 ; pins 4,5,6 are AUX 1,2,3, default off ; pp5 = out0 ; pp6 = out0 hdwtype=0 rxboost=1 txboost=1 rxctcssrelax=1 txctcssdefault=100.0 rxctcssfreqs=100.0 txctcssfreqs=100.0 rxctcssoverride=0 ;carrierfrom=dsp carrierfrom=ppinvert ;ctcssfrom=dsp ;ctcssfrom=pp rxdemod=flat txprelim=yes txlimonly=no txtoctype=notone txmixa=composite txmixb=no invertptt=0 duplex=0 rxondelay=0 rxnoisefiltype=0 eeprom=0 #includeifexists custom/usbradio.conf

1 0

Re: [App_rpt-users] usbradio.conf sample file for IRLP boards
by K&R Yoksh 01 Nov '10

01 Nov '10

Looks like email garbled the output, and left a ton of garbage characters in the file, such as these question marks: ; IRLP board support pp3 =? ptt?????? ; out0, out1 or ptt ; pp10 = in??????? ; in, cor or ctcss ; pp12 = in??????? ; pins 10,12,13,15 are for DTMF Contact me off list for a copy if necessary. I'll resend as plain text and see if that helps. 73 Kyle K0KN

1 0