January 2011 - App_rpt-users - lists.keekles.org

DTMF Passthru
by VE3GIH Gordon Hewit 27 Jan '11

27 Jan '11

Thanks to those that responded to my previous request for help passing DTMF between nodes. Apparently, we agree that DTMF tones are not being passed thru Asterisk nodes on the same PC, regardless of the setting of rpt.conf parameter 'propagate_dtmf'. If someone has actually done passed DTMF via Asterisk, I'd appreciate hearing from them VE3GIH Gord Hewit Durham ARES 416-779-3740 mobile 289-800-1473 VoIP www.durhamares.ca website 4167793740(a)txt.bell.ca SMS email VE3GIH(a)winlink.org Emerg. email

2 1

WxScript
by k8khw＠att.net 27 Jan '11

27 Jan '11

<snip> ?Mark, Finally after a fresh install of all the files I have the get scripts running. When I try to play the scripts it acts like its running and goes back to the root prompt and nothing come out the speakers or transmitted over the air. Is there something I need to change in the play script to get it to play. I am using the W0ANM scripts. Brian KB3ORS 27321 Brain I ask the same question a while back and never did get the issue resolved. Actually here everything is working as it should which I bet is the case in your end as well. Here When we call for the script to play the Wx file it plays it fine but is only heard if someone else is talking on the system and has the Node keyed up. When they unkey or stop talking so does the Wx script. I bet if you havn,t fixed it ready try calling the Script and have a on going qso on your system and see if you hear the Wx report ect. if you have it working we would like to know what you did. Randy Node 27372

2 1

manually issue COP command?
by K&R Yoksh 26 Jan '11

26 Jan '11

Thanks to Jim, my aux ports are working now! The PP must be uppercase, as in the examples below: rpt cmd 2211 cop 61,PP4=1 0 ; Parallel Port 4 high rpt cmd 2211 cop 61,PP4=0 0 ; Parallel Port 4 low rpt cmd 2211 cop 61,PP5=1 0 ; Parallel Port 5 high rpt cmd 2211 cop 61,PP5=0 0 ; Parallel Port 5 low 73, Kyle K0KN --- Original Message --- Ok, I have the answer: rpt cmd 2211 cop 61,pp4=1 0 JIM

1 0

Re: [App_rpt-users] manually issue COP command?
by Jim Duuuude 26 Jan '11

26 Jan '11

Ok, I have the answer: rpt cmd 2211 cop 61,pp4=1 0 JIM From: yokshs(a)sbcglobal.net To: telesistant(a)hotmail.com Subject: Re: [App_rpt-users] manually issue COP command? Date: Wed, 26 Jan 2011 00:40:15 -0600 No problem.. Any idea why I can't get the parallel port outputs to work with a COP? Thanks. 73. Kyle K0KN ----- Original Message ----- From: Jim Duuuude To: yokshs(a)sbcglobal.net ; app_rpt mailing list Sent: Tuesday, January 25, 2011 10:54 PM Subject: RE: [App_rpt-users] manually issue COP command? never mind... that was just a dumb suggestion. I wasnt paying attention fully. sorry From: telesistant(a)hotmail.com To: yokshs(a)sbcglobal.net; app_rpt-users(a)ohnosec.org Subject: RE: [App_rpt-users] manually issue COP command? Date: Tue, 25 Jan 2011 20:12:31 -0800 How about rpt cmd 2211 cop 61 GPIO4=1 (since that's what would go in the line for a DTMF function) JIM From: yokshs(a)sbcglobal.net To: app_rpt-users(a)ohnosec.org Date: Tue, 25 Jan 2011 13:57:28 -0600 Subject: [App_rpt-users] manually issue COP command? Hi Tim (and the list), Thanks for the reply.. I have these entries in usbradio.conf: pp3 = ptt pp11 = cor ; pp10 = in ; in, cor or ctcss ; pp12 = in ; pins 10,12,13,15 are for DTMF ; pp13 = in ; pp15 = in pp4=out0 ; pins 4,5,6 are AUX 1,2,3, default off pp5=out0 pp6=out0 My PTT and COS via the parallel port work perfectly, but so far, the only success I've had controlling other pins has been by assigning them to PTT. For example, as a test I set: pp3 = ptt pp4 = ptt pp5 = ptt pp6 = ptt This keys all 4 outputs any time PTT is called for. I just wanted to make sure that app_rpt could control those pins.. Besides that, I've had no success trying to use COP 61 or 62 to control my pp4,5,6 I've tried the syntax you suggested: rpt cmd 2211 cop 61 pp4=1 I've also tried every other thing I could think of, including: rpt cmd 2211 cop 61 pp4=1,0 rpt cmd 2211 cop 61 pp4=1.0,0 rpt cmd 2211 cop 62 pp4=32767 73. Kyle K0KN --- Original Message ---I've not played with this but my guess is... You in usbradio.conf you should put this in the [usb] stanza: pp2=out0 ; set parallel port pin 2 to low output. Then this should change it to high: CLI>rpt cmd 2211 cop 61 pp2=1 Jim or others please jump in here if I have it wrong. -- Tim :wq _______________________________________________ App_rpt-users mailing list App_rpt-users(a)ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

1 0

manually issue COP command?
by K&R Yoksh 26 Jan '11

26 Jan '11

Hi Tim (and the list),Thanks for the reply.. I have these entries in usbradio.conf: pp3 = ptt pp11 = cor ; pp10 = in ; in, cor or ctcss ; pp12 = in ; pins 10,12,13,15 are for DTMF ; pp13 = in ; pp15 = in pp4=out0 ; pins 4,5,6 are AUX 1,2,3, default off pp5=out0 pp6=out0 My PTT and COS via the parallel port work perfectly, but so far, the only success I've had controlling other pins has been by assigning them to PTT. For example, as a test I set: pp3 = ptt pp4 = ptt pp5 = ptt pp6 = ptt This keys all 4 outputs any time PTT is called for. I just wanted to make sure that app_rpt could control those pins.. Besides that, I've had no success trying to use COP 61 or 62 to control my pp4,5,6 I've tried the syntax you suggested: rpt cmd 2211 cop 61 pp4=1 I've also tried every other thing I could think of, including: rpt cmd 2211 cop 61 pp4=1,0 rpt cmd 2211 cop 61 pp4=1.0,0 rpt cmd 2211 cop 62 pp4=32767 73. Kyle K0KN --- Original Message ---I've not played with this but my guess is... You in usbradio.conf you should put this in the [usb] stanza: pp2=out0 ; set parallel port pin 2 to low output. Then this should change it to high: CLI>rpt cmd 2211 cop 61 pp2=1 Jim or others please jump in here if I have it wrong. -- Tim :wq

2 2

Happer system with APRS
by Jim Duuuude 26 Jan '11

26 Jan '11

I found and fixed the problem (well, it wasnt really a problem, more of an irritation) that some of you were having while running APRS (the 'interrupted system call' thing). Please re-download app_gps from the SVN and it will fix this. JIM WB6NIL

1 0

Rxnotch
by Monty Dana 25 Jan '11

25 Jan '11

I found an old config file for app_rpt at voip-info.org and the rxnotch= caught my eye. Are we still able to use that? Monty

2 1

Re: [App_rpt-users] manually issue cop command?
by K&R Yoksh 25 Jan '11

25 Jan '11

Hi Tim,Thanks for the reply.. I've been playing around at the CLI prompt, and can get functions such as this to work:rpt cmd 2211 cop 4 0However, I still can't seem to control my parallel port I/O pins. I've followed all of the advice onhttp://ohnosec.org/drupal/node/177Any suggestions?Thanks.. 73KyleK0KN --- Original Message ---You do not have to assign a dtmf. Example: CLI> rpt cmd 2535 cop 1 0 The above command is a warm boot. 2535 is my node number. Notice the trailing 0 is needed to satisfy the command interpreter but has no meaning. Asterisk has command line help. Type "rpt cmd" and press enter will show options. -- Tim :wq

2 1

manually issue COP command?
by K&R Yoksh 25 Jan '11

25 Jan '11

Hello, I'm wondering if there is a way to manually issue a COP command? I've tried to issue it from the CLI> prompt, but so far no luck.. I have been working on my DTMF commands, and after the below commands didn't work, I wanted to check the syntax.. Is it possible, or do I have to assign a DTMF in rpt.conf, restart Asterisk, and retry? 1234 = cop,61,PP4=1 ; Turn on pp4 Thanks. 73, Kyle K0KN

2 1

URI PTT Delay
by Steve Schulze 25 Jan '11

25 Jan '11

Anyone experiencing PTT delays with DMK's URI? I have seen many instances of where Asterisk is sending voice to the URI (announcements, etc...), but the PTT is not engaged, nor is the TX LED lit. Anyone have any insight? Thanks! -- Steve Schulze - Radio Amateur, General Class - N9UDO Administrator, Baraboo, Wisconsin D-Star System - WB9FDZ Treasurer, Badgerland Amateur Television Society - KB9SFS http://yellowthunder.org/dstar.html

1 0