January 2011 - App_rpt-users - lists.keekles.org

A Bit of Irony
by Buddy Brannan 11 Jan '11

11 Jan '11

Can we get allison to record the word "Repeater"? It strikes me as a little ironic that repeater control software doesn't know the word "repeater". (Besides, we could then make up repeater ID's that say repeater, without using Cepstral, if she said it.) -- Buddy Brannan, KB5ELV - Erie, PA Phone: (814) 860-3194 or 888-75-BUDDY

4 5

Re: [App_rpt-users] A Bit of Irony
by Tony KT9AC 11 Jan '11

11 Jan '11

Me too. Setting the wait ID timer to 4 seconds prevents the double id's, but 2 seconds still does it (both of mine are CW). ----- Reply message ----- From: "Buddy Brannan" <buddy(a)brannan.name> Date: Mon, Jan 10, 2011 8:52 pm Subject: [App_rpt-users] A Bit of Irony To: "Scott Weis" <kb2ear(a)kb2ear.net> Cc: <app_rpt-users(a)ohnosec.org> Thanks Scott, I was looking in the wrong place (/var/lib/sounds/rpt). Think I looked in the root sounds directory before, but a long time ago. Now I have an ID that works a treat :) Now if I can just get this talkover ID followed by voice ID issue nailed down.... -- Buddy Brannan, KB5ELV - Erie, PA Phone: (814) 860-3194 or 888-75-BUDDY On Jan 10, 2011, at 8:59 PM, Scott Weis wrote: > On a properly installed system the word repeater is located in > /var/lib/asterisk/sounds/repeater.gsm and can be called from the repeater > with localplay repeater > > -----Original Message----- > From: app_rpt-users-bounces(a)ohnosec.org > [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Buddy Brannan > Sent: Monday, January 10, 2011 8:05 PM > To: app_rpt mailing list > Subject: [App_rpt-users] A Bit of Irony > > Can we get allison to record the word "Repeater"? It strikes me as a little > ironic that repeater control software doesn't know the word "repeater". > (Besides, we could then make up repeater ID's that say repeater, without > using Cepstral, if she said it.) > -- > Buddy Brannan, KB5ELV - Erie, PA > Phone: (814) 860-3194 or 888-75-BUDDY > > > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > _______________________________________________ App_rpt-users mailing list App_rpt-users(a)ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

1 0

Two Servers Behind NAT Router?
by Tim Sawyer 08 Jan '11

08 Jan '11

Is it possible to run two servers on one NATed network? I assume the second server one would be on some port other then 4569 but I don't see how to set that up. TIA. -- Tim :wq

1 0

iax / Asterisk & I should never be called
by Ken 03 Jan '11

03 Jan '11

Update The funny warning message comes from the fact that iaxRpt is not compatible with port address translation (PAT). I switched to the "bindport" method of changing the port number. But I still have the original problem: one node connects, the other does not. The connection that works looks like this: -- Executing [27061@radio-gui:1] Rpt("IAX2/gui-5701", "27061|X") in new stack The one that does not work looks like this: -- Executing [27021@radio-gui:1] Rpt("IAX2/gui-5264", "(27021|X)") in new stack == Parsing '/etc/asterisk/rpt.conf': Found == Parsing '/var/lib/asterisk/rpt_extnodes': Found [Jan 2 20:11:37] WARNING[24086]: app_rpt.c:20884 rpt_exec: Cannot find specified system node (27021 The obvious difference being the left parenthesis ahead of the node number. It seems that Asterisk is being asked to connect 27061 in one case and "(27021" in the other case. And Asterisk is complaining about a node whose number starts with a "(" I cannot figure out where the extra "(" is coming from.. Tnx Ken

1 0

COP commands
by k8khw＠att.net 02 Jan '11

02 Jan '11

Could someone direct me to where we can find a complete list of the cop commands. Were wanting to enable/disable RX audio on a URL if possible. We seem to be having a issue on the RF side of something getting into the reciever. Randy

2 1

Re: [App_rpt-users] iax / Asterisk & I should never be called
by Ken 02 Jan '11

02 Jan '11

No replies on this one - yet Let me add one thing - if I try to connect to the node on port 4569 while the one on port 4568 is already connected, iaxRpt gives an error message about the node already being active and refuses to attempt the connection. So I am sort of concluding that iaxRpt cannot handle a case where there are two nodes on different ports at the same IP address. I am (slightly) surprised that the one that works is the higher-numbered node on the non-standard port, but given the messages that app_rpt is throwing off (below), it's clear that chan_iax.c and channel.c are working in some sort of goofball mode anyhow and I am just lucky that it fails in a way to yield a working connection (these are versions 266 and 267, incidentally). Has anyone else tried iaxRpt on an asterisk system with two nodes behind a common router? Ken From: Ken [mailto:ke2n@cs.com] Sent: Friday, December 31, 2010 12:09 PM To: 'app_rpt-users(a)ohnosec.org' Subject: iax / Asterisk & I should never be called Been scratching my head here for a week with iaxRpt. I have two nodes: I can connect to one of them (so iaxRpt is obviously working) but not the other App-rpt is trying to tell me something about the problem but I do not know what: atom2*CLI> -- Accepting AUTHENTICATED call from 69.243.53.147: > requested format = ulaw, > requested prefs = (), > actual format = ulaw, > host prefs = (ulaw|gsm), > priority = mine -- Executing [27021@radio-gui:1] Rpt("IAX2/gui-126", "(27021|X)") in new stack [Dec 31 11:39:13] WARNING[1555]: app_rpt.c:20884 rpt_exec: Cannot find specified system node (27021 == Spawn extension (radio-gui, 27021, 1) exited non-zero on 'IAX2/gui-126' -- Hungup 'IAX2/gui-126' I have looked at iax.conf and extensions.conf and do not see any differences between the two nodes, other than the node numbers. I am connecting from behind the same router. The node that works is on port 4568 (on the internet side) and the one that does not work is on port 4569. The one that works can connect both on the local IP address and on the WAN address with the 4568 port number appended. I have tried making the iaxRpt "listener port 4567, "just for grins" - no effect. >>>>> Why can't app-rtp find it *own* node number when called by iaxRpt? Here is what it looks like when it works (the other node): -- Accepting AUTHENTICATED call from 69.243.53.147: > requested format = gsm, > requested prefs = (), > actual format = gsm, > host prefs = (gsm), > priority = mine -- Executing [27061@radio-gui:1] Rpt("IAX2/gui-6459", "27061|X") in new stack [Dec 31 12:02:43] NOTICE[22711]: channel.c:2075 __ast_read: No/unknown event '0' on timer for 'IAX2/gui-6459'? [Dec 31 12:02:43] NOTICE[22711]: chan_iax2.c:4677 iax2_read: I should never be called! == Spawn extension (radio-gui, 27061, 1) exited KEEPALIVE on 'IAX2/gui-6459' -- <Zap/pseudo-363503172 ((all the callsign readouts here)) -- Hungup 'Zap/pseudo-363503172' -- Hungup 'Zap/pseudo-135650357' The "I should never be called" message looks like something gone wrong in app-rpt .. except that it works. Ken

1 0

Web Pages
by Ryan Collier 01 Jan '11

01 Jan '11

For anyone that needs it I have modified W0ANM scripts to work with thelinkbox. There might need to be a few things change but only takes a matter of a minute or two. Also, is there anything out there that will give me a basic overview of the asterisk node? Example who is connect, if t links are up, etc? Ryan KB8PMY

1 0

Fw: Weather Script
by KB3ORS - Brian 01 Jan '11

01 Jan '11

? ?Mark, Finally after a fresh install of all the files I have the get scripts running. When I try to play the scripts it acts like its running and goes back to the root prompt and nothing come out the speakers or transmitted over the air. Is there something I need to change in the play script to get it to play. I am using the W0ANM scripts. Brian KB3ORS 27321 -----Original Message----- From: Mark Phillips Sent: Friday, December 10, 2010 4:10 PM To: app_rpt mailing list Subject: Re: [App_rpt-users] Weather Script This is excellent but it doesn't speak to the requirement of a severe weather warning. Try this http://webpages.charter.net/w0anm/irlp/WxScripts.html and http://webpages.charter.net/w0anm/irlp/scripts/WxScripts-0.9.4.noarch.rpm You want the getWxAlert script. It calls out to NOAA and downloads an XML file formatted in the Govt's new alerting format. If you poll it every minute you'll get an update as soon as it's posted. We have it configured on our 220 repeater such that a severe event gets play instantly and then every 10 minutes for the first hour and then 20 mins for the second hour and then 30 mins thereafter until the event is canceled. The script can be modified to collect other info too. Amber Alerts are now using this XML format as are DHS and other Govt agencies. Mark On 12/10/2010 09:22 AM, David KE6UPI wrote: > I have used this script. Works well. > > > asterisk at home festival weather configuration > > MP3 Audio directly from NOAA! Updated URLs on 12-15-06 > > If you are in the San Diego NOAA Office area (and maybe others, check > your regional NOAA Office homepage from http://weather.gov/) you can > get an audio file of the current forecast for your zone and play it > directly. > > For the San Diego NOAA Office area, go to > http://newweb.wrh.noaa.gov/sgx/ and click on the Audio selection under > Forecasts. Get the URL of the audio file for your zone from the map. > > Create an announcement in wav format from: > http://www.research.att.com/~ttsweb/tts/demo.php > I like the UK-Audrey voice, but try some others too. > Make something like: > latest-forecast.wav "Please wait while I download the latest forecast" > select-weatherorvmc.wav > "Press 1 for voicemail press 2 for the latest weather forecast" > You will have to convert the wav files from 16000Hz to 8000Hz and maybe > speed them up a bit (135%) and reduce the volume (60%) before you use > them. Put them in /var/lib/asterisk/sounds named latest-forecast.wav and > select-weatherorvmc.wav > > Add something like this to your extensions.conf (maybe in the rans > <http://www.voip-info.org/wiki/view/rans> section) to get the latest > forecast when you dial whatever extension (like 865) that you choose. > > My extensions.conf for audio weather: > > | > exten => 865,1,Answer > exten => 865,2,Playback(latest-forecast) > exten => > 865,3,System(/usr/bin/curl -shttp://www.wrh.noaa.gov/sgx/data/audio/LAXSAFC42.mp3 > > /tmp/LAXSAFC42.mp3) > > exten => 865,4,Wait(1) > exten => 865,5,MP3Player(/tmp/LAXSAFC42.mp3) > exten => 865,6,System(rm /tmp/LAXSAFC42.mp3 -f) > exten => 865,7,Hangup > | > > > > If you have trouble, make sure you have curl installed, change the path > above if necessary. find / -type f -name "curl" will find your curl > executable. I'm using MP3Player instead of Playback because I don't have > a sound card in the Asterisk box so mpg123 fails when it tries to use > /dev/dsp. I suppose there is a way to have a dummy dev, but I don't know > how. If you do use Playback instead of MP3Player, don't use the .mp3 > file extension in your extensions.conf. > > > http://www.voip-info.org/wiki/view/asterisk+at+home+festival+weather+config… > > David > > > On Thu, Dec 9, 2010 at 8:27 PM, Dwaine Garden <DwaineGarden(a)rogers.com > <mailto:DwaineGarden@rogers.com>> wrote: > > I would be interested in that. > > Dwaine > > > "KB3ORS - Brian" <kb3ors(a)windstream.net > <mailto:kb3ors@windstream.net>> wrote: > > >I know there is weather scripts for irlp. But I am not having any > luck > >for allstar. I am wondering is there anyone who has one is willing > to > >help build one. What I am looking for just a weather alert script > for > >the severe alerts. I don’t want a full blown weather forcast. > > > >Any help appreciated > > > >KB3ORS – Brian_______________________________________________ > >App_rpt-users mailing list > >App_rpt-users(a)qrvc.com <mailto:App_rpt-users@qrvc.com> > >http://qrvc.com/mailman/listinfo/app_rpt-users > > -- > Sent from my Android phone with K-9 Mail. Please excuse my brevity. > -- > Sent from my Android phone with K-9 Mail. Please excuse my brevity. > _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)qrvc.com <mailto:App_rpt-users@qrvc.com> > http://qrvc.com/mailman/listinfo/app_rpt-users > > > > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)qrvc.com > http://qrvc.com/mailman/listinfo/app_rpt-users -- /\/\ark Phillips _______________________________________________ App_rpt-users mailing list App_rpt-users(a)qrvc.com http://qrvc.com/mailman/listinfo/app_rpt-users ----- No virus found in this message. Checked by AVG - www.avg.com Version: 10.0.1170 / Virus Database: 426/3307 - Release Date: 12/10/10

1 0