October 2011 - App_rpt-users - lists.keekles.org

Re: [App_rpt-users] App_rpt-users Digest, Vol 32, Issue 6
by Ken Page 06 Oct '11

06 Oct '11

Hi Mr Duuuude, Well. I am able to access the PBX via the phone that is plugged into the TDM card and jump on the meetme conference. I can also bridge in another caller into the conference and talk for about 10 seconds before Asterisk stops / falls over. The last thing in the log that Asterisk seems to try to do before it crashes is read the radio tune stuff. The two URI interfaces do flash as per normal for a while before it all crashes. If I just try rebooting the machine but not accessing Asterisk at all via phone or anything it still falls over soon after boot. Weird. Am I right in guessing that because I can access meetme conference and also the TDM card that the zaptel drivers are loaded OK? ~Ken - vk4akp~ .-.-. On 10/7/2011 1:30 AM, app_rpt-users-request(a)ohnosec.org wrote: > Message: 3 > Date: Thu, 6 Oct 2011 08:30:55 -0700 > From: Jim Duuuude<telesistant(a)hotmail.com> > To:<vk4akp(a)yahoo.com.au>, app_rpt mailing list > <app_rpt-users(a)ohnosec.org> > Subject: Re: [App_rpt-users] Asterisk service stopping minutes after > boot constantly.. Help? > Message-ID:<BLU155-W223FE76CA98B46CFDF40CEB1F90(a)phx.gbl> > Content-Type: text/plain; charset="iso-8859-1" > > > looks to me like maybe Zaptel isnt running > > JIM > >> > Date: Fri, 7 Oct 2011 01:29:32 +1000 >> > From:vk4akp@yahoo.com.au >> > To:app_rpt-users@ohnosec.org >> > Subject: [App_rpt-users] Asterisk service stopping minutes after boot constantly.. Help? >> > >> > Hi, >> > >> > Last few days I have had a problem with Asterisk stopping for no reason. >> > >> > Asterisk service stops a couple of minutes after boot for no reason. >> > >> > Every time I reboot or restart Asterisk I get the same thing. Asterisk >> > runs for a couple of minutes and then drops out. >> > >> > Nothing has been changed on the system in weeks. >> > >> > Any idea's? >> > >> > Tail of the log is included below. >> > >> > ~Ken - vk4akp~ >> > .-.-. >> > >> > [Oct 7 00:29:41] NOTICE[7624] pbx_ael.c: Starting AEL load process. >> > [Oct 7 00:29:41] NOTICE[7624] pbx_ael.c: AEL load process: calculated >> > config file name '/etc/asterisk/extensions.ael'. >> > [Oct 7 00:29:41] NOTICE[7624] pbx_ael.c: AEL load process: parsed >> > config file name '/etc/asterisk/extensions.ael'. >> > [Oct 7 00:29:41] NOTICE[7624] pbx_ael.c: AEL load process: checked >> > config file name '/etc/asterisk/extensions.ael'. >> > [Oct 7 00:29:41] NOTICE[7624] pbx_ael.c: AEL load process: compiled >> > config file name '/etc/asterisk/extensions.ael'. >> > [Oct 7 00:29:41] NOTICE[7624] pbx_ael.c: AEL load process: merged >> > config file name '/etc/asterisk/extensions.ael'. >> > [Oct 7 00:29:41] NOTICE[7624] pbx_ael.c: AEL load process: verified >> > config file name '/etc/asterisk/extensions.ael'. >> > [Oct 7 00:29:41] ERROR[7624] codec_dahdi.c: Failed to open >> > /dev/zap/transcode: No such file or directory >> > [Oct 7 00:29:41] NOTICE[7624] chan_irlp.c: Unable to load config irlp.conf >> > [Oct 7 00:29:42] NOTICE[7624] app_gps.c: Unable to load config gps.conf >> > [Oct 7 00:29:42] NOTICE[7665] app_rpt.c: Normal Repeater Init 2134 >> > [Oct 7 00:29:42] NOTICE[7665] app_rpt.c: Normal Repeater Init 20040 >> > [Oct 7 00:29:42] WARNING[7668] chan_usbradio.c: Loaded parameters from >> > usbradio_tune_usb.conf for device usb . >> > [Oct 7 00:29:42] WARNING[7672] chan_usbradio.c: Loaded parameters from >> > usbradio_tune_usb1.conf for device usb1 . >> > >> > -- >> >

1 0

Asterisk service stopping minutes after boot constantly.. Help?
by Ken Page 06 Oct '11

06 Oct '11

Hi, Last few days I have had a problem with Asterisk stopping for no reason. Asterisk service stops a couple of minutes after boot for no reason. Every time I reboot or restart Asterisk I get the same thing. Asterisk runs for a couple of minutes and then drops out. Nothing has been changed on the system in weeks. Any idea's? Tail of the log is included below. ~Ken - vk4akp~ .-.-. [Oct 7 00:29:41] NOTICE[7624] pbx_ael.c: Starting AEL load process. [Oct 7 00:29:41] NOTICE[7624] pbx_ael.c: AEL load process: calculated config file name '/etc/asterisk/extensions.ael'. [Oct 7 00:29:41] NOTICE[7624] pbx_ael.c: AEL load process: parsed config file name '/etc/asterisk/extensions.ael'. [Oct 7 00:29:41] NOTICE[7624] pbx_ael.c: AEL load process: checked config file name '/etc/asterisk/extensions.ael'. [Oct 7 00:29:41] NOTICE[7624] pbx_ael.c: AEL load process: compiled config file name '/etc/asterisk/extensions.ael'. [Oct 7 00:29:41] NOTICE[7624] pbx_ael.c: AEL load process: merged config file name '/etc/asterisk/extensions.ael'. [Oct 7 00:29:41] NOTICE[7624] pbx_ael.c: AEL load process: verified config file name '/etc/asterisk/extensions.ael'. [Oct 7 00:29:41] ERROR[7624] codec_dahdi.c: Failed to open /dev/zap/transcode: No such file or directory [Oct 7 00:29:41] NOTICE[7624] chan_irlp.c: Unable to load config irlp.conf [Oct 7 00:29:42] NOTICE[7624] app_gps.c: Unable to load config gps.conf [Oct 7 00:29:42] NOTICE[7665] app_rpt.c: Normal Repeater Init 2134 [Oct 7 00:29:42] NOTICE[7665] app_rpt.c: Normal Repeater Init 20040 [Oct 7 00:29:42] WARNING[7668] chan_usbradio.c: Loaded parameters from usbradio_tune_usb.conf for device usb . [Oct 7 00:29:42] WARNING[7672] chan_usbradio.c: Loaded parameters from usbradio_tune_usb1.conf for device usb1 . -- On 10/7/2011 12:38 AM, app_rpt-users-request(a)ohnosec.org wrote: > Send App_rpt-users mailing list submissions to > app_rpt-users(a)ohnosec.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > or, via email, send a message with subject or body 'help' to > app_rpt-users-request(a)ohnosec.org > > You can reach the person managing the list at > app_rpt-users-owner(a)ohnosec.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of App_rpt-users digest..." > > > Today's Topics: > > 1. for those Limey Linux and or D525MW users who are brave > enough (Jim Duuuude) > 2. Re: for those Limey Linux and or D525MW users who are brave > enough (Jim Duuuude) > 3. Re: for those Limey Linux and or D525MW users who are brave > enough (Ramesh Dhami (VA3UV)) > 4. Re: for those Limey Linux and or D525MW users who are brave > enough (Jon Rorke) > 5. Re: for those Limey Linux and or D525MW users who are brave > enough (Jim Duuuude) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Thu, 6 Oct 2011 06:46:45 -0700 > From: Jim Duuuude<telesistant(a)hotmail.com> > To: app_rpt mailing list<app_rpt-users(a)ohnosec.org> > Subject: [App_rpt-users] for those Limey Linux and or D525MW users who > are brave enough > Message-ID:<BLU155-W1720983FA3876AD1B9AAEAB1F90(a)phx.gbl> > Content-Type: text/plain; charset="iso-8859-1" > > > I have compiled a test version of Limey Linux version 1.1.5 that appears > to properly support the new Intel D525MW Atom motherboard. > > This is an 'augmented' version of the i686-suported-1.1.5 release, so > it *should* work on all the previously-supported i686 processors, also. > > There were some rather major changes (necessary to support SATA > interfaces) in the hard disk driver stuff (even for those MB's that only > have IDE), so it would be nice if some people could verify that this still > works on non-D525MW motherboards (at least the ones that work in > the normal release). > > I have tested this release on both a D525MW and the D945GCLF series > motherboards, and it seems to work just fine. > > Also, if you have 5 minutes to wait for it to boot (since the SWINE boot loader does > not support anything faster then USB 1.1 speed, YUCH!), you can flash > the distro onto a USB pen drive (>= 128 MB), and it will work. Once the > OS loads, it runs at full speed, just the initial boot load is PAINFULLY slow. > > If you dare, here is the URL for this version: > > > http://stats.allstarlink.org/limeylinux/downloads/cfimg-D525MW-1.1.5.tar.gz > > JIM WB6NIL > > > > > >

2 1

TX Delay??
by K&R Yoksh 03 Oct '11

03 Oct '11

Hello Travis, I'm wondering if you are also missing the first 2 seconds of transmissions from other nodes as well? I haven't read what type of radio hardware you're using, but everything I've ever used will key plenty quick to hear the entire announcement, etc. 73. Kyle K0KN --- Original Message ---Is there a way to delay the messages the XIPAR server put over the air?? The problem I am having is for example if I send the *81 command to get the current time I will only hear the min's because it is not keyed up long enough before it starts talking. Thanks for any help W3TMB Travis

2 1

TX Delay??
by Travis Best 03 Oct '11

03 Oct '11

Is there a way to delay the messages the XIPAR server put over the air?? The problem I am having is for example if I send the *81 command to get the current time I will only hear the min's because it is not keyed up long enough before it starts talking. Thanks for any help W3TMB Travis

3 4

How do I view the gzip'd.text archives?
by Mike Ping 03 Oct '11

03 Oct '11

In the archives list on the right hand side you can download the months archives into a txt.gz file. How can I view these. I have tried the instructions found at http://johnpoelstra.com/tag/import/ with his example with no problems but when I apply the same instructions to the file found on this list I have no luck. Ideally I would like to import them into Thunderbird or something similar for easy searching. Mike - N3KPU

2 2

Echolink connect/disconnect messages
by K&R Yoksh 02 Oct '11

02 Oct '11

Hello all, Is there any way to play a connect message to Echolink stations and/or send a text message to connecting Echolink stations in their text box? I believe that this has come up before (March 2011) but I've not found a solution yet. I was actually thinking today of writing a script to deny reoccurring "drive-by" Echolink stations, but maybe a better solution is an audio and/or text message? Thanks. 73 Kyle K0KN --- Original Message --- On the same topic ... has anyone figured out how to play a connect message to Echolink? I am guessing that the reason they disappear is that they do not hear anything. The ID and tail-message do not come out on E/L Ken

1 0

Serial/Parrallel interface
by Carl Davies 02 Oct '11

02 Oct '11

Hi group, Carl M1ELR here, I noticed in a post a few days ago there was mention of using the Parallel port for PTT or COR, is this possible? I currently run my node using the Centos install package from the Allstar site but can change to the install version from Xipar if needed. I have without success been buying sound fobs to build a new interface and now have a drawer full of USB fobs that I can't mod, if the I/O wasn't via the USB sound fob that would make life so much easier as the CM108 seems to be getting harder to source. Thanks, Best Regards Carl M1ELR, Allstar node 27473

2 1

IAXRPT Console
by Travis Best 02 Oct '11

02 Oct '11

I am trying to setup the IAXRPT Console with Xipar and when I try to connect to my system I get Call Attempt Failed in the console and on my Xipar box i get the following message in the log [Oct 1 18:04:25] NOTICE[1679] chan_iax2.c: Host 10.0.0.2 failed to authenticate as gui Thanks Travis Best W3TMB

2 1