October 2011 - App_rpt-users - lists.keekles.org

Syntor X Remote Base
by Monty 30 Oct '11

30 Oct '11

Hello Everyone, I am wondering if anyone on the list has successfully integrated a Syntor X with an Xcat to app_rpt? I have 2m and a 10m/6m flavor. Would the 10m/6m have trouble? Monty

5 7

Pickle Linux Site
by Keith Dobbins 28 Oct '11

28 Oct '11

Did the Picklejaj linux site dissapear? I'm interested in getting a beagleboard to play with and lox but wanted to look at the info first and the site seems to be inaccessible. Keith Dobbins A.S. Flight Paramedic 3402 Linden Street Parkersburg, WV 26104-1608 Amateur Radio Call Sign: KC8RFW

2 1

Re: [App_rpt-users] App_rpt-users Digest, Vol 32, Issue 27
by Mark Huelskoetter 27 Oct '11

27 Oct '11

Are you running 3 nodes on this server or just two? Because your lsusb output suggests that you are running 3 URI's. If that's the case asterisk might be getting confused on which usb device is which. Before you go through the hassle of recompiling everything try unplugging all of the radio interfaces, run asterisk and look for the segfault. Next, add one back, restart asterisk and see what happens, etc...You see where I am going with this? Try them all, maybe even in different ports. If you are still having problems, download the new sources and compile. I suggest you back up of the .conf files in /etc/asterisk, then obtain the new source code. Per the instructions on the Allstar webpage, you can get it in the following fashion: cd /usr/src/ wget http://x.allstarlink.org/svn-trunk.tar.gz -O- | tar xzv mv trunk astsrc cd astsrc Then you can use the make command. I think make install_usbradio is correct for your situation, I am not where I can check my notes. Someone else might be able to suggest something different. Good LUCK!!! Mark - WL7NI

1 0

Re: [App_rpt-users] App_rpt-users Digest, Vol 32, Issue 27
by Ken Page 27 Oct '11

27 Oct '11

Hi, OK I worked out why Zaptel wasn't running. When I re-compiled and re-installed Asterisk the init.d stuff got over written. I've put back the old one and now all the Zaptel and wctdm stuff is running again as it should. However this still doesn't solve the problem. I still get the segmentation fault and dropout of the Asterisk service 10 seconds after it has booted up. Everything runs fine up till this point. I have quickly been able to confirm the radio devices work, and conference etc works before the crash. Disabling the radio stuff still shows a seg fault. So I don't believe it's directly related to any of the radio modules. I include the tail of the log below. ~Ken - vk4akp .-.-. -- Your zaptel interface is not loading. Try killing asterisk then run: modprobe zaptel service zaptel start service asterisk restart See if it works. If not looks at the system log and see what errors are coming up. Mark - WL7NI -- -- Including context 'ael-dundi-e164-via-pstn' in context 'ael-dundi-e164-local' -- Registered extension context 'ael-dundi-e164-switch' -- Including switch 'DUNDi/e164' in context 'ael-dundi-e164-switch' -- Registered extension context 'ael-dundi-e164-lookup' -- Including context 'ael-dundi-e164-local' in context 'ael-dundi-e164-lookup' -- Including context 'ael-dundi-e164-switch' in context 'ael-dundi-e164-lookup' -- Registered extension context 'macro-ael-dundi-e164' -- Registered extension context 'ael-iaxtel700' -- Registered extension context 'ael-iaxprovider' -- Registered extension context 'ael-trunkint' -- Including context 'ael-dundi-e164-lookup' in context 'ael-trunkint' -- Registered extension context 'ael-trunkld' -- Including context 'ael-dundi-e164-lookup' in context 'ael-trunkld' -- Registered extension context 'ael-trunklocal' -- Registered extension context 'ael-trunktollfree' -- Registered extension context 'ael-international' -- Including context 'ael-longdistance' in context 'ael-international' -- Including context 'ael-trunkint' in context 'ael-international' -- Registered extension context 'ael-longdistance' -- Including context 'ael-local' in context 'ael-longdistance' -- Including context 'ael-trunkld' in context 'ael-longdistance' -- Registered extension context 'ael-local' -- Including context 'ael-default' in context 'ael-local' -- Including context 'ael-trunklocal' in context 'ael-local' -- Including context 'ael-iaxtel700' in context 'ael-local' -- Including context 'ael-trunktollfree' in context 'ael-local' -- Including context 'ael-iaxprovider' in context 'ael-local' -- Registered extension context 'macro-ael-std-exten-ael' -- Registered extension context 'ael-demo' -- Registered extension context 'ael-default' -- Including context 'ael-demo' in context 'ael-default' -- Added extension 's' priority 1 to macro-ael-dundi-e164 -- Added extension 's' priority 2 to macro-ael-dundi-e164 -- Added extension 's' priority 3 to macro-ael-dundi-e164 -- Added extension 's' priority 4 to macro-ael-dundi-e164 -- Added extension '_91700XXXXXXX' priority 1 to ael-iaxtel700 -- Added extension '_9011.' priority 1 to ael-trunkint -- Added extension '_9011.' priority 2 to ael-trunkint -- Added extension '_91NXXNXXXXXX' priority 1 to ael-trunkld -- Added extension '_91NXXNXXXXXX' priority 2 to ael-trunkld -- Added extension '_9NXXXXXX' priority 1 to ael-trunklocal -- Added extension '_91800NXXXXXX' priority 1 to ael-trunktollfree -- Added extension '_91888NXXXXXX' priority 1 to ael-trunktollfree -- Added extension '_91877NXXXXXX' priority 1 to ael-trunktollfree -- Added extension '_91866NXXXXXX' priority 1 to ael-trunktollfree -- Added extension 's' priority 1 to macro-ael-std-exten-ael -- Added extension 's' priority 2 to macro-ael-std-exten-ael -- Added extension 's' priority 3 to macro-ael-std-exten-ael -- Added extension 's' priority 4 to macro-ael-std-exten-ael -- Added extension 's' priority 5 to macro-ael-std-exten-ael -- Added extension 's' priority 6 to macro-ael-std-exten-ael -- Added extension 's' priority 7 to macro-ael-std-exten-ael -- Added extension 's' priority 8 to macro-ael-std-exten-ael -- Added extension 'a' priority 1 to macro-ael-std-exten-ael -- Added extension 'a' priority 2 to macro-ael-std-exten-ael -- Added extension 'a' priority 3 to macro-ael-std-exten-ael -- Added extension '_sw-1-.' priority 10 to macro-ael-std-exten-ael -- Added extension '_sw-1-.' priority 11 to macro-ael-std-exten-ael -- Added extension 'sw-1-' priority 10 to macro-ael-std-exten-ael -- Added extension 'sw-1-BUSY' priority 10 to macro-ael-std-exten-ael -- Added extension 'sw-1-BUSY' priority 11 to macro-ael-std-exten-ael -- Added extension 's' priority 1 to ael-demo -- Added extension 's' priority 2 to ael-demo -- Added extension 's' priority 3 to ael-demo -- Added extension 's' priority 4 to ael-demo -- Added extension 's' priority 5 to ael-demo -- Added extension 's' priority 6 to ael-demo -- Added extension 's' priority 7 to ael-demo -- Added extension 's' priority 8 to ael-demo -- Added extension 's' priority 9 to ael-demo -- Added extension 's' priority 10 to ael-demo -- Added extension 's' priority 11 to ael-demo -- Added extension 's' priority 12 to ael-demo -- Added extension '2' priority 1 to ael-demo -- Added extension '2' priority 2 to ael-demo -- Added extension '3' priority 1 to ael-demo -- Added extension '3' priority 2 to ael-demo -- Added extension '1000' priority 1 to ael-demo -- Added extension '500' priority 1 to ael-demo -- Added extension '500' priority 2 to ael-demo -- Added extension '500' priority 3 to ael-demo -- Added extension '500' priority 4 to ael-demo -- Added extension '600' priority 1 to ael-demo -- Added extension '600' priority 2 to ael-demo -- Added extension '600' priority 3 to ael-demo -- Added extension '600' priority 4 to ael-demo -- Added extension '_1234' priority 1 to ael-demo -- Added extension '8500' priority 1 to ael-demo -- Added extension '8500' priority 2 to ael-demo -- Added extension '#' priority 1 to ael-demo -- Added extension '#' priority 2 to ael-demo -- Added extension 't' priority 1 to ael-demo -- Added extension 'i' priority 1 to ael-demo [Oct 26 22:48:22] NOTICE[17679]: pbx_ael.c:4490 pbx_load_module: AEL load process: compiled config file name '/etc/asterisk/extensions.ael'. [Oct 26 22:48:22] NOTICE[17679]: pbx_ael.c:4493 pbx_load_module: AEL load process: merged config file name '/etc/asterisk/extensions.ael'. [Oct 26 22:48:22] NOTICE[17679]: pbx_ael.c:4496 pbx_load_module: AEL load process: verified config file name '/etc/asterisk/extensions.ael'. pbx_ael.so => (Asterisk Extension Language Compiler) == Registered application 'TestClient' == Registered application 'TestServer' app_test.so => (Interface Test Application) == Registered application 'LookupCIDName' app_lookupcidname.so => (Look up CallerID Name from local database) == Registered file format sln, extension(s) sln|raw format_sln.so => (Raw Signed Linear Audio support (SLN)) == Parsing '/etc/asterisk/cdr_pgsql.conf': Found cdr_pgsql.so => (PostgreSQL CDR Backend) == Registered custom function URIDECODE == Registered custom function URIENCODE func_uri.so => (URI encode/decode dialplan functions) == Parsing '/etc/asterisk/codecs.conf': Found -- codec_gsm: using generic PLC == Registered translator 'gsmtolin' from format gsm to slin, cost 9 == Registered translator 'lintogsm' from format slin to gsm, cost 14 codec_gsm.so => (GSM Coder/Decoder) == Registered application 'Milliwatt' app_milliwatt.so => (Digital Milliwatt (mu-law) Test Application) == Registered application 'SoftHangup' app_softhangup.so => (Hangs up the requested channel) == Parsing '/etc/asterisk/codecs.conf': Found -- codec_zap: using generic PLC [Oct 26 22:48:22] ERROR[17679]: codec_dahdi.c:427 find_transcoders: Failed to open /dev/zap/transcode: No such file or directory codec_dahdi.so => (Generic DAHDI Transcoder Codec Translator) [Oct 26 22:48:22] NOTICE[17679]: chan_irlp.c:1998 load_module: Unable to load config irlp.conf == Registered application 'WaitForRing' app_waitforring.so => (Waits until first ring after time) == Registered format 'jpg' (JPEG (Joint Picture Experts Group)) format_jpeg.so => (JPEG (Joint Picture Experts Group) Image Format) == Parsing '/etc/asterisk/meetme.conf': Found == Parsing '/etc/asterisk/sla.conf': Found == Manager registered action MeetmeMute == Manager registered action MeetmeUnmute == Registered application 'MeetMeAdmin' == Registered application 'MeetMeCount' == Registered application 'MeetMe' == Registered application 'SLAStation' == Registered application 'SLATrunk' app_meetme.so => (MeetMe conference bridge) == Registered file format wav49, extension(s) WAV|wav49 format_wav_gsm.so => (Microsoft WAV format (Proprietary GSM)) == Registered custom function CUT == Registered custom function SORT func_cut.so => (Cut out information from a string) == Registered file format g723sf, extension(s) g723|g723sf format_g723.so => (G.723.1 Simple Timestamp File Format) == Registered application 'ZapScan' == Registered application 'DAHDIScan' app_dahdiscan.so => (Scan Zap channels application) == Registered application 'Read' app_read.so => (Read Variable Application) == Registered application 'SayUnixTime' == Registered application 'DateTime' app_sayunixtime.so => (Say time) == Registered custom function REALTIME func_realtime.so => (Read/Write values from a RealTime repository) == Registered file format vox, extension(s) vox format_vox.so => (Dialogic VOX (ADPCM) File Format) == Registered application 'ZapBarge' app_dahdibarge.so => (Barge in on channel application) == Registered application 'SendImage' app_image.so => (Image Transmission Application) == Parsing '/etc/asterisk/cdr.conf': Found cdr_csv.so => (Comma Separated Values CDR Backend) == Registered application 'ZapSendKeypadFacility' == Parsing '/etc/asterisk/zapata.conf': Found -- Registered channel 1, FXO Kewlstart signalling -- Registered channel 2, FXO Kewlstart signalling -- Automatically generated pseudo channel == Parsing '/etc/asterisk/users.conf': Found == Registered channel type 'Zap' (DAHDI Telephony Driver w/PRI) == Manager registered action ZapTransfer == Manager registered action ZapHangup == Manager registered action ZapDialOffHook == Manager registered action ZapDNDon == Manager registered action ZapDNDoff == Manager registered action ZapShowChannels == Manager registered action ZapRestart chan_dahdi.so => (DAHDI Telephony w/PRI) == Registered application 'ControlPlayback' app_controlplayback.so => (Control Playback Application) [Oct 26 22:48:23] NOTICE[17679]: app_gps.c:430 load_module: Unable to load config gps.conf == Registered application 'ParkAndAnnounce' app_parkandannounce.so => (Call Parking and Announce Application) == Registered application 'MP3Player' app_mp3.so => (Silly MP3 Application) == Registered application 'Zapateller' app_zapateller.so => (Block Telemarketers with Special Information Tone) Asterisk Ready. *CLI> == Parsing '/etc/asterisk/rpt.conf': Found -- Loading initial config for repeater 2134 == Parsing '/etc/asterisk/rpt.conf': Found [Oct 26 22:48:23] NOTICE[17714]: app_rpt.c:19094 rpt_master: Normal Repeater Init 2134 -- Re-Loading config for repeater 2134 == Parsing '/etc/asterisk/rpt.conf': Found ERROR: numrxcodes != numtxcodes -- rpt (Rx) initiating call to Radio/usb on Radio/usb -- Loading initial config for repeater 20040 == Parsing '/etc/asterisk/rpt.conf': Found [Oct 26 22:48:23] NOTICE[17714]: app_rpt.c:19094 rpt_master: Normal Repeater Init 20040 -- Re-Loading config for repeater 20040 == Parsing '/etc/asterisk/rpt.conf': Found -- rpt (Rx) initiating call to Radio/usb1 on Radio/usb1 == Set device 1-2 to usb == Set device 1-1 to usb1 ERROR: numrxcodes != numtxcodes == Parsing '/etc/asterisk/usbradio_tune_usb.conf': == Parsing '/etc/asterisk/usbradio_tune_usb1.conf': Found Found [Oct 26 22:48:23] WARNING[17718]: chan_usbradio.c:1449 hidthread: Loaded parameters from usbradio_tune_usb.conf for device usb . [Oct 26 22:48:23] WARNING[17720]: chan_usbradio.c:1449 hidthread: Loaded parameters from usbradio_tune_usb1.conf for device usb1 . Segmentation fault

3 2

Radio to Radio communication
by Zstart Zstar 27 Oct '11

27 Oct '11

Dear All, I am newbie to app_rpt. I have a basic question, I have searched about it, but I could not find an appropriate solution. I have two radios which works in different frequency bands. Both are connected to Asterisk using URI. Reverse Autopatch is working fine from PSTN to the both radios. I want to establish a call between the radios. My question is that "is is possible to configure app_rpt to act as a bidirectional bridge between two radios?", i.e., when radio 1 activates PTT, its TX audio is transferred to radio 2 and vice versa. Any recommendation/answer would be appreciated. Thanks in advance. -- Best Regards. Matteo.

1 1

Asterisk still crashing.
by Ken Page 25 Oct '11

25 Oct '11

Asterisk is still crashing soon after it starts. We're getting this now as the last message. [Oct 25 01:30:53] ERROR[7239]: app_rpt.c:19126 rpt_master: Continual RPT thread restarts, killing Asterisk Any idea's? the box has been offline now for several weeks. I am getting pressure from the radio group to dump All_Star and move to a Windoze box with Echolink. :( So what's involved in disabling the APP_RPT radio stuff so our normal Asterisk conferences etc can still be loaded up? ~Ken - vk4akp .-.-. == Set device 1-1 to usb1 == Parsing '/etc/asterisk/usbradio_tune_usb.conf': Found [Oct 25 01:30:45] WARNING[7279]: chan_usbradio.c:1449 hidthread: Loaded parameters from usbradio_tune_usb.conf for device usb . == Parsing '/etc/asterisk/usbradio_tune_usb1.conf': Found [Oct 25 01:30:45] WARNING[7281]: chan_usbradio.c:1449 hidthread: Loaded parameters from usbradio_tune_usb1.conf for device usb1 . [Oct 25 01:30:47] NOTICE[7239]: app_rpt.c:19131 rpt_master: RPT thread restarted on 2134 -- Re-Loading config for repeater 2134 == Parsing '/etc/asterisk/rpt.conf': Found -- rpt (Rx) initiating call to Radio/usb on Radio/usb [Oct 25 01:30:47] WARNING[7290]: channel.c:3051 ast_request: No channel type registered for 'zap' [Oct 25 01:30:47] WARNING[7239]: app_rpt.c:19143 rpt_master: rpt_thread restarted on node 2134 [Oct 25 01:30:47] NOTICE[7239]: app_rpt.c:19131 rpt_master: RPT thread restarted on 20040 -- Re-Loading config for repeater 20040 == Parsing '/etc/asterisk/rpt.conf': Found -- rpt (Rx) initiating call to Radio/usb1 on Radio/usb1 == Set device 1-2 to usb [Oct 25 01:30:47] WARNING[7292]: channel.c:3051 ast_request: No channel type registered for 'zap' [Oct 25 01:30:47] WARNING[7239]: app_rpt.c:19143 rpt_master: rpt_thread restarted on node 20040 == Set device 1-1 to usb1 == Parsing '/etc/asterisk/usbradio_tune_usb.conf': Found [Oct 25 01:30:47] WARNING[7291]: chan_usbradio.c:1449 hidthread: Loaded parameters from usbradio_tune_usb.conf for device usb . == Parsing '/etc/asterisk/usbradio_tune_usb1.conf': Found [Oct 25 01:30:47] WARNING[7293]: chan_usbradio.c:1449 hidthread: Loaded parameters from usbradio_tune_usb1.conf for device usb1 . [Oct 25 01:30:49] NOTICE[7239]: app_rpt.c:19131 rpt_master: RPT thread restarted on 2134 -- Re-Loading config for repeater 2134 == Parsing '/etc/asterisk/rpt.conf': Found -- rpt (Rx) initiating call to Radio/usb on Radio/usb [Oct 25 01:30:49] WARNING[7302]: channel.c:3051 ast_request: No channel type registered for 'zap' [Oct 25 01:30:49] WARNING[7239]: app_rpt.c:19143 rpt_master: rpt_thread restarted on node 2134 [Oct 25 01:30:49] NOTICE[7239]: app_rpt.c:19131 rpt_master: RPT thread restarted on 20040 -- Re-Loading config for repeater 20040 == Parsing '/etc/asterisk/rpt.conf': Found -- rpt (Rx) initiating call to Radio/usb1 on Radio/usb1 == Set device 1-2 to usb == Set device 1-1 to usb1 [Oct 25 01:30:49] WARNING[7304]: channel.c:3051 ast_request: No channel type registered for 'zap' [Oct 25 01:30:49] WARNING[7239]: app_rpt.c:19143 rpt_master: rpt_thread restarted on node 20040 == Parsing '/etc/asterisk/usbradio_tune_usb.conf': Found [Oct 25 01:30:49] WARNING[7303]: chan_usbradio.c:1449 hidthread: Loaded parameters from usbradio_tune_usb.conf for device usb . == Parsing '/etc/asterisk/usbradio_tune_usb1.conf': Found [Oct 25 01:30:49] WARNING[7305]: chan_usbradio.c:1449 hidthread: Loaded parameters from usbradio_tune_usb1.conf for device usb1 . [Oct 25 01:30:51] NOTICE[7239]: app_rpt.c:19131 rpt_master: RPT thread restarted on 2134 -- Re-Loading config for repeater 2134 == Parsing '/etc/asterisk/rpt.conf': Found -- rpt (Rx) initiating call to Radio/usb on Radio/usb [Oct 25 01:30:51] WARNING[7314]: channel.c:3051 ast_request: No channel type registered for 'zap' [Oct 25 01:30:51] WARNING[7239]: app_rpt.c:19143 rpt_master: rpt_thread restarted on node 2134 == Set device 1-2 to usb [Oct 25 01:30:51] NOTICE[7239]: app_rpt.c:19131 rpt_master: RPT thread restarted on 20040 -- Re-Loading config for repeater 20040 == Parsing '/etc/asterisk/rpt.conf': Found -- rpt (Rx) initiating call to Radio/usb1 on Radio/usb1 [Oct 25 01:30:51] WARNING[7239]: app_rpt.c:19143 rpt_master: rpt_thread restarted on node 20040 [Oct 25 01:30:51] WARNING[7316]: channel.c:3051 ast_request: No channel type registered for 'zap' == Set device 1-1 to usb1 == Parsing '/etc/asterisk/usbradio_tune_usb.conf': Found [Oct 25 01:30:51] WARNING[7315]: chan_usbradio.c:1449 hidthread: Loaded parameters from usbradio_tune_usb.conf for device usb . == Parsing '/etc/asterisk/usbradio_tune_usb1.conf': Found [Oct 25 01:30:51] WARNING[7317]: chan_usbradio.c:1449 hidthread: Loaded parameters from usbradio_tune_usb1.conf for device usb1 . [Oct 25 01:30:53] ERROR[7239]: app_rpt.c:19126 rpt_master: Continual RPT thread restarts, killing Asterisk shazam*CLI> Disconnected from Asterisk server Executing last minute cleanups

3 2

EchoLink Callsign instead of node number.
by Bob Roszkowski 25 Oct '11

25 Oct '11

Is there a way to change Allstar to report an EchoLinks Callsign and not their node number when they connect? I have not been able to find any documentation how to change this. -- boB - W5EVH

3 4

Re: [App_rpt-users] Variable Repeat Audio Delay
by Tim Sawyer 24 Oct '11

24 Oct '11

I can't see why hangtime would affect it any. But yep, it let's us know it's working. The delay itself is only slightly bothersome but fact that it varies from near zero at times to a second or more at other times is very weird. -- Tim :wq On Oct 24, 2011, at 8:06 AM, Mars - N0PCO wrote: > On 10/24/2011 09:53 AM, Tim Sawyer wrote: >> Just to be sure we are talking about the same thing.... it's repeat audio delay I'm talking about, not the delay between nodes, correct? In other words, you are saying that the jitter buffer affected repeat audio? >> -- >> Tim >> :wq >> > > > Check your hangtime and althangtime in rpt.conf for the node that has > the problem with audio being echoed when unkeyed. Longer hangtime will > tend to present the problem that you mentioned. > > But it sure lets one know that things are working, huh? ;) > > Havaday > > -- > Mars, N0PCO > ALERTradio ERC > www.alertradio.net | www.asteriskradio.net | www.darnsimple.net > Technology resources for public safety. It's all about being ready.

1 0

Variable Repeat Audio Delay
by Tim Sawyer 24 Oct '11

24 Oct '11

App_rpt has an indeterminate repeat audio delay on our system. Sometimes we hear ourselves when we unkey other times not. The amount of delay varies from near zero to four or five words. Has anybody else experienced this on their system? -- Tim :wq

2 3

Node 27875 is no longer in the database
by Lu Vencl 24 Oct '11

24 Oct '11

I keep running into this issue where my node is no longer in the database.. I can connect to nodes, but it still just shows up as NA.. Example below after I connected to 2560 Any ideas on why this is happening? Node 2560 Connections Node Mode Callsign Channel CTCSS Location 1001 N/A N/A N/A N/A N/A 1350 N/A N/A N/A N/A N/A 1360 N/A N/A N/A N/A N/A 1401 N/A N/A N/A N/A N/A 1440 N/A N/A N/A N/A N/A 1779 N/A N/A N/A N/A N/A 1801 N/A N/A N/A N/A N/A 1988 N/A N/A N/A N/A N/A 2137 <http://stats.allstarlink.org/?node=2137> Transceive KJ6MID 445.900- 131.8 Santa Barbara, CA 2414 <http://stats.allstarlink.org/?node=2414> Transceive N5ZUA 147.200 + 103.5 Bastrop, Texas 2430 <http://stats.allstarlink.org/?node=2430> Transceive WR5AAA 146.88 - 203.5 Cat Spring, Texas 2433 <http://stats.allstarlink.org/?node=2433> Transceive N5XWD 444.300 + 123.0 Houston, Texas 2448 <http://stats.allstarlink.org/?node=2448> Transceive K7IZA 448.575 77.0 Las Vegas, NV 2450 <http://stats.allstarlink.org/?node=2450> Transceive K7IZA 445.500 77.0 Nevada 2545 <http://stats.allstarlink.org/?node=2545> Transceive WA7G 441.675 100 Napa, CA 2591 <http://stats.allstarlink.org/?node=2591> Transceive N5ZUA 444.975 + 173.8 Alexandria, Louisiana 2596 <http://stats.allstarlink.org/?node=2596> Transceive WB6IAG 224.440(S) 100.0 Paradise, Ca. 2597 <http://stats.allstarlink.org/?node=2597> Transceive K6BDM 448.940 - 100.0 Thousand Oaks, CA 27079 N/A N/A N/A N/A N/A 27084 <http://stats.allstarlink.org/?node=27084> Transceive WH6FM HUB Hilo, HI 27144 N/A N/A N/A N/A N/A 27669 <http://stats.allstarlink.org/?node=27669> Transceive N5FAZ 442.100 123.0 El Paso, Texas 27824 <http://stats.allstarlink.org/?node=27824> Transceive WB5UGT 145.350 - 203.5 Addicks, TX 27847 <http://stats.allstarlink.org/?node=27847> Transceive KG5YH 146.800 - 100.0 La Grange, TX 27859 <http://stats.allstarlink.org/?node=27859> Transceive K4GET 445.425(S) 100.0 plantation,FL USA 27875 N/A N/A N/A N/A N/A

1 0