May 2011 - App_rpt-users - lists.keekles.org

Re: [App_rpt-users] App_rpt-users Digest, Vol 27, Issue 7
by Ken Page 15 May '11

15 May '11

Hi Guys! Any chance of getting some Speex and Codec2 support into the project? This would allow All_Star nodes to go digital in area's where there is interest. People in my area have been playing with radio's interfaced via sound card software and there is some talk of a hardware project for mobile operation. Would be nice to get in at the cutting edge of this. Potentially All_Star could give D-Star a big run for it's money as the preferred alternative for digital voice as there is a lot of controversy over D-Star's commercial vocoder and the reason why most avoid it and are looking towards Speex & Codec2 instead. See: http://www.rowetel.com/blog/?page_id=452 & http://codec2.org/ Regards, Ken - vk4akp .-.-. On 5/15/2011 9:12 AM, app_rpt-users-request(a)ohnosec.org wrote: > Send App_rpt-users mailing list submissions to > app_rpt-users(a)ohnosec.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > or, via email, send a message with subject or body 'help' to > app_rpt-users-request(a)ohnosec.org > > You can reach the person managing the list at > app_rpt-users-owner(a)ohnosec.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of App_rpt-users digest..." > > > Today's Topics: > > 1. ACCESS (k8khw) > 2. Re: ACCESS (Jim Duuuude) > 3. re broken node after upgrade (REDBUTTON_CTRL) > 4. Re: re broken node after upgrade (Jim Duuuude) > 5. Re: re broken node after upgrade > (=?utf-8?B?a3Q5YWNAYW1lcml0ZWNoLm5ldA==?=) > 6. Re: re broken node after upgrade (Jim Duuuude) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Sat, 14 May 2011 13:43:37 -0400 > From: "k8khw"<k8khw(a)att.net> > To:<app_rpt-users(a)ohnosec.org> > Subject: [App_rpt-users] ACCESS > Message-ID:<43DE27C9F54C40AC9C660EA07BD9C335@Office> > Content-Type: text/plain; charset="iso-8859-1" > > Where do I change the ACCESS settings within > Asterisk , Acid version. > > Randy >

1 0

re broken node after upgrade
by REDBUTTON_CTRL 14 May '11

14 May '11

HI I had an older node that had app_rpt version 0.254. I went to upgrade and now it doesnt work. the console commands dont work either. Here is the o/p after the final recompile: [CC] app_random.c -> app_random.o [CC] app_read.c -> app_read.o [CC] app_readfile.c -> app_readfile.o [CC] app_realtime.c -> app_realtime.o [CC] app_record.c -> app_record.o [CC] app_rpt.c -> app_rpt.o app_rpt.c:528:24: error: mdc_decode.c: No such file or directory make[2]: *** [app_rpt.o] Error 1 make[2]: *** Waiting for unfinished jobs.... make[2]: Leaving directory `/usr/src/astsrc/asterisk/apps' make[1]: *** [apps] Error 2 make[1]: Leaving directory `/usr/src/astsrc/asterisk' make: [upgrade-acid] Error 2 (ignored) mkdir -p /var/lib/asterisk/sounds/rpt cp -a sounds/* /var/lib/asterisk/sounds [root@AST_2378_WAJ astsrc]# I upgrade the node with the following : cd /usr/src rm -rf astsrc wget http://x.allstarlink.org/svn-trunk.tar.gz -O- | tar xzv mv trunk astsrc cd astsrc make upgrade-acid any ideas? Jon VA3RQ

2 1

ACCESS
by k8khw 14 May '11

14 May '11

Where do I change the ACCESS settings within Asterisk , Acid version. Randy

2 1

Doing a 'status,2' as a tail message
by Tony 11 May '11

11 May '11

Is there a way to have the time of day sent as a tail message (status,12)? I looked through the docs and Google, but didn't see anything apparent. The source code just goes after voice files. Another way would be to use a script call or something. Thanks, Tony

4 3

Overdriven dial tone on repeater - SOLVED
by Ed 08 May '11

08 May '11

A while back, I inquired as to how I could have all of the other audio at reasonable levels, but the dial tone sounded over-deviated. I received a response that it was impossible to over-deviate on a dial tone if the repeater was tunes properly. A service monitor was just given to me, so the first thing I did was point a beam at the repeater and look at the signals. I began by going through the procedures outlined on the website: http://ohnosec.org/drupal/node/48 While testing, I set the CTCSS level to 0, and when it transmitted, my handheld radio, set to require CTCSS, opened and I heard the repeater. Soooooo, it sounded over-deviated because I had 2 tones being transmitted, in addition to the audio. One from Asterisk, and the other from the transmitter radio. I thought it was interesting, and might help someone else later. All is well on the repeater now. KI6PSP Sent from my iPad

2 1

support BB -> was: problems
by Scott Zimmerman 04 May '11

04 May '11

>> On 5/4/11 9:37 AM, Scott Zimmerman wrote: >> >> Along these same lines, I will offer (for free) to anyone that >> e-mails me privately, an 'A' or 'CNAME' pointer to their server from >> allstarnode.com. After further review, contemplation, and discussions with the developers, I hereby rescind the above offer. What sounded good in theory doesn't always translate well in implementation. I'll not elaborate on how this 'good idea' could have created issues, but suffice it to say that it was a BAD IDEA after all. The offer to check out the forums still stands, however!! Thanks, Scott Scott Zimmerman Amateur Radio Call N3XCC 474 Barnett Road Boswell, PA 15531

1 0

problems
by Jean Létourneau 04 May '11

04 May '11

I am using is version 01.01.46 And my Xipar is version 1.02, and I have the following problem. when I try to use IaxRpt I get this from my asterisk : [May 1 07:20:13] NOTICE[1549]: chan_iax2.c:9433 socket_process: Rejected connect attempt from 192.168.1.117, request 'gui@radio-gui' does not exist like the user gui doesn't exist. is anyone can help? thanks, Jean, VE2PKT -

5 4

AX25 on an Allstar Node
by KI6PSP (Ed) 03 May '11

03 May '11

Does the installation in its current form support AX25? I ask, because I am being asked by my club to integrate WINLINK 2000 onto the computer. I plan on using the available serial port to a TNC. Thanks -- KI6PSP (Ed)

1 0

Switching Courtesy Tones
by Tony KT9AC 01 May '11

01 May '11

Has anyone been able to switch courtesy tones, either by COP commands or Event Management Subsystem? I would like to do so based on GPIO inputs. Would this be a code enhancement request? Thanks, Tony

1 0