May 2011 - App_rpt-users - lists.keekles.org

DTMF sensitivity
by Phil N6TCT 24 May '11

24 May '11

Ok, next question. :-) We just deployed a beagleboard with URI as a mountaintop repeater. It's mostly working great. One problem we just discovered is with the phone patch: dtmf digits are frequently getting doubled. E.g., "510" as an area code will show up as "5510" or "5110", causing the call to fail. It happens about 30-50% of the call attempts and on different radios (Kenwood and Yaesu HTs, ditto for mobile rigs). I used susb tune to adjust the rx audio level for 3 kHz, so I don't believe it's something like bad audio volumes being fed into the URI. Any ideas for places I should look or things I should tune? Thanks very much! Phil, N6TCT

1 0

Running a shell script from a DTMF command?
by Phil N6TCT 24 May '11

24 May '11

Hi gang. Basic question here: what is the magic incantation to run an arbitrary shell script from a DTMF command to an asterisk app_rpt system? E.g., I want to be able to dial *99999 or something and have my asterisk system run /usr/local/bin/whatever. I figure there has to be a way to do this, but I haven't been able to spot it. Thanks! Phil, N6TCT

2 2

Re: [App_rpt-users] Echolink Log
by Bryan D. Boyle 23 May '11

23 May '11

On 5/23/11 9:21 AM, Jim Duuuude wrote: > that's strange > > chan_echolink creates a 'NOTICE' level log entry in the Asterisk log > (/var/log/asterisk/messages) when a connection occurs. Are you > not seeing them?? > Only seeing the IP address, not the registered (authenticated?) callsign. Guess I shouldn't, since, as I understand it, authorization is via being tagged in the central Echolink database, and we inherit permission to connect from those credentials? -- Bryan In this world, you must be oh so smart or oh so pleasant. Well, for years I was smart. I recommend pleasant. You may quote me.

1 0

Echolink Log
by Bryan D. Boyle 23 May '11

23 May '11

We've been having a 'spot of bother' with a couple of users coming in via the echolink system (and allstar, but that was taken care of smartly) and disrupting operations and nets with some bad music. Now, while we're a tight-knit community and can police our own (thanks Jim!), the amorphous Echolink 'Home Office' is a bit more stodgy about it...and requested our 'logs', I guess assuming that we were running on their standard windows load. Which, for obvious reasons, we're not. So, in grok'ing through the logs on my system...didn't see (I guess I don't have it set at the right debug level? I'm running at the default...) any of the connect messages from chan_echolink or any other place where this information would be sent to disk for record keeping purposes when a validated user (either via allstar or Echo) connects. Any thoughts or insight? Am I missing something (and would cheerfully admit that I do miss a lot of things...). -- Bryan WB0YLE Allstar 27294/27295/27673/27710 Echolink WB0YLE-R 224.54/927.6500/145.25 Morrisville PA In this world, you must be oh so smart or oh so pleasant. Well, for years I was smart. I recommend pleasant. You may quote me.

1 0

Broken Link
by Tim Sawyer 22 May '11

22 May '11

Steve or Jim, The link to creating sound files with Audacity on the bottom of this page is broken. Can you have a look at that? http://ohnosec.org/drupal/node/142 -- Tim :wq

2 1

new Pickle Linux release - BeagleBoard-xM Rev. C
by Jim Duuuude 18 May '11

18 May '11

Apparently, on 4/27/11, CircuitCo started shipping Rev. C BeagleBoard-xM boards. These boards have some subtle hardware differences which made previous boot loader and kernels unable to run on them. Despite many hurdles (which I won't go into) I have released a new version of Pickle Linux which successfully supports this new hardware. In addition (thanks to Moishe, NY2SI for bringing this to my attention), I fixed a problem with the chan_beagle driver. So, even if you have an older board, it would be a good idea to at least update from the latest SVN sources, or download the new version of Pickle Linux. JIM WB6NIL

2 2

space shuttle audio
by Bob Brown - WØNQX 16 May '11

16 May '11

any one running a rx only node for shuttle comms? -- Thanks in Advance Bob Brown, WØNQX Kansas City Metro Area http://sm0kenet.net http://byrg.net http://kcdstar.byrg.net Quis custodiet ipsos custodes? Its not how many watts you have, its the SIZE of your watts that matter! -- Johnny Marshall, W0JM-SK --

1 0

Re: [App_rpt-users] Access
by k8khw 15 May '11

15 May '11

Not sure how else to decribe it. Acess settings like for the Reverse autopatch Telephone Portal , Web Transciever Looking for the way to change them by not using the web based method. Randy

3 2

Re: [App_rpt-users] [SPAM] App_rpt-users Digest, Vol 27, Issue 8
by George Csahanin 15 May '11

15 May '11

I think he means how to actually edit rpt.conf, etc("settings")...I think... He may be only doing this via the web site(??) GeorgeC W2DB 2360 > Date: Sat, 14 May 2011 22:54:36 -0700 > From: Jim Duuuude <telesistant(a)hotmail.com> > To: <k8khw(a)att.net>, app_rpt mailing list <app_rpt-users(a)ohnosec.org> > Subject: Re: [App_rpt-users] Access > Message-ID: <BLU155-w56E71CAC676F655BFCF9EAB18A0(a)phx.gbl> > Content-Type: text/plain; charset="iso-8859-1" > > > The reverse autopatch via the Allstar Telephone Portal is > something that is provided via the Allstar Network system > infrastructure and, for the most part, is implemented > in the Allstar Portal system. The node plays very little > role in the process, other then responding to requests > from the Portal system. Therefore, the control for access > of this service is exclusively implemented within the > Allstar Portal. > > If you wish to "roll your own" reverse autopatch, > that's a whole other issue entirely. > > JIM WB6NIL > > > From: k8khw(a)att.net > To: app_rpt-users(a)ohnosec.org > Date: Sat, 14 May 2011 22:57:41 -0400 > Subject: Re: [App_rpt-users] Access > > > > > > > > > > > Not sure how else to decribe it. > Acess settings like for the Reverse > autopatch > Telephone Portal , Web Transciever Looking > for > the way to change them by not using the web > based > method. > > > Randy > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users >

1 0

Re: [App_rpt-users] re broken node after upgrade
by kt9ac＠ameritech.net 15 May '11

15 May '11

You need to copy the mdc1200 encode and decode libraries back into the app directory, its looking for mdc_decode.c per the error message. ----- Reply message ----- From: "REDBUTTON_CTRL" <jrorke(a)cogeco.ca> Date: Sat, May 14, 2011 5:01 pm Subject: [App_rpt-users] re broken node after upgrade To: "APP_RPT_Users" <app_rpt-users(a)ohnosec.org> HI I had an older node that had app_rpt version 0.254. I went to upgrade and now it doesnt work. the console commands dont work either. Here is the o/p after the final recompile: [CC] app_random.c -> app_random.o [CC] app_read.c -> app_read.o [CC] app_readfile.c -> app_readfile.o [CC] app_realtime.c -> app_realtime.o [CC] app_record.c -> app_record.o [CC] app_rpt.c -> app_rpt.o app_rpt.c:528:24: error: mdc_decode.c: No such file or directory make[2]: *** [app_rpt.o] Error 1 make[2]: *** Waiting for unfinished jobs.... make[2]: Leaving directory `/usr/src/astsrc/asterisk/apps' make[1]: *** [apps] Error 2 make[1]: Leaving directory `/usr/src/astsrc/asterisk' make: [upgrade-acid] Error 2 (ignored) mkdir -p /var/lib/asterisk/sounds/rpt cp -a sounds/* /var/lib/asterisk/sounds [root@AST_2378_WAJ astsrc]# I upgrade the node with the following : cd /usr/src rm -rf astsrc wget http://x.allstarlink.org/svn-trunk.tar.gz -O- | tar xzv mv trunk astsrc cd astsrc make upgrade-acid any ideas? Jon VA3RQ _______________________________________________ App_rpt-users mailing list App_rpt-users(a)ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

3 2