January 2012 - App_rpt-users - lists.keekles.org

DTMF voice falsing
by Chris(KB2FAF) 23 Jan '12

23 Jan '12

Hi, I have been noticing an interesting problem. Audio drops on my repeater and link sporadically for maybe 500ms now and then as a conversation is taking place. If I watch debugging data from CLI it usually coincides with DTMF being sensed in certain voices. Is there a way to increase the time it takes for the system to recognize DTMF? Or is there something else going on. Thanks for any pointers... Chris KB2FAF

7 13

THIN CLIENTS
by Bradley Haney 23 Jan '12

23 Jan '12

Looking for a few THin Clients to put ALLSTAR in.. IS this model compatible? *HP Thin Client T5730* or which ones will work?

2 1

LOX/Pickle Help
by John (WB5NFC) 23 Jan '12

23 Jan '12

I'm finally getting around to working on my Pickle/LOX/BeagleBoard setup once again after an extended absence. Finding bits and pieces of information at various locations, but nothing much in one spot. Has anyone aggregated info on a site I've not found yet? What sort of enclosures are others using successfully for the BeagleBoard/Lox board combo? I don't have a radio connected yet to either LOX port. When I log on to my Pickel node with the iaxRpt client, I hear the transmitter cycling every second or so. Guessing I may need to change some configs until I get RF connected, but not sure where to begin. Thanks for any suggestions. Lovin' this little beauty. Kudos for all who made it happen. John / WB5NFC

1 0

voice announcements getting clipped at the start.
by Bradley Haney 23 Jan '12

23 Jan '12

does anyone know how to put i guess like a audio delay for announcements? when i dtmf the system to play the time it cuts the first part of the time off . I guess i want the transmitter to key up for 1 sec then start playing the file.. Bradley

2 1

Re: [App_rpt-users] APRSTT
by Bradley Haney 22 Jan '12

22 Jan '12

63 - Send pre-configred APRSTT notification (cop,63,CALL[,OVERLAYCHR]) is it active? do i DTMF in my Call sign ? On Sat, Jan 21, 2012 at 9:41 PM, Ken <ke2n(a)cs.com> wrote: > Bradley**** > > ** ** > > *63 is not a command**** > > ** ** > > It’s a function**** > > ** ** > > Whatever command you have configured for 63 is the command that Asterisk > will execute when it hears *63**** > > ** ** > > Ken**** > > ** ** > > ** ** > > *From:* app_rpt-users-bounces(a)ohnosec.org [mailto: > app_rpt-users-bounces(a)ohnosec.org] *On Behalf Of *Bradley Haney > *Sent:* Saturday, January 21, 2012 10:30 PM > *To:* app_rpt-users(a)ohnosec.org > *Subject:* [App_rpt-users] APRSTT**** > > ** ** > > Is this feature working i see it command *63? **** >

2 1

APRSTT
by Bradley Haney 22 Jan '12

22 Jan '12

Is this feature working i see it command *63?

1 0

Slightly OT:U-Verse
by George Csahanin 21 Jan '12

21 Jan '12

Hi everyone. I just decided teo re-arrange my TV/phone/Internet stuff, and ordered AT&T Uverse, and was assured three times that I can keep my present block of static IP addresses I have with my Business HSI Elite-S DSL plan. I have read online many horror stories related to this service and I'm curious if anyone out there in app_rpt land is using the multiple static IP U-Verse service with APP_RPT or anything else. If it all works well the speed improvement will be pretty significant up to 24MB down/3MB up. Present plan is 6MB down, 768KBPS up, and I run name mail and web servers and a VPN to another house, plus node 2360. GeorgeC W2DB 2360

6 6

MSI CX700D and Limey Linux
by Keith Dobbins 21 Jan '12

21 Jan '12

Will Limey Linux run on this motherboard? I got offered a couple of em just wanted to check first before I look into using them. Keith Dobbins A.S. Flight Paramedic 3402 Linden Street Parkersburg, WV 26104-1608 Amateur Radio Call Sign: KC8RFW

2 1

How to view everything in the .CONF's
by Bradley Haney 21 Jan '12

21 Jan '12

I am looking for the telementry and dtmf stuff in the .conf's and can't seem to find them.. Any thoughts

2 1

MDC1200 and recording files
by Ismael Isuani 20 Jan '12

20 Jan '12

Hi all I have a node with usbradio and rpt working perfectly, multiple iaxrpt clients are connected to that node. I set archivedir for audio recording, but I need to identify each of the clients in the recording file name by MDC1200. example: /var/spool/asterisk/monitor/nodename /${MDC1200}_date.wav I configured rpt.conf as follows: [events] TEMPVAR=v|e|$ {RPT_TXKEYED} *971=f|t|TEMPVAR [functions] 97=autopatchup,noct=1,farenddisconnect=1,dialtime=20000 extensions.conf [radio] exten => 1,1, MixMonitor .. # MixMonitor MDCVAR ? [mdcmacro] I1234 = Should I set a MDCVAR for later use with MixMonitor? Any ideas? Thanks!

1 0