January 2013 - App_rpt-users - lists.keekles.org

URI<>TKR-750 cable
by Jay Urish 06 Feb '15

06 Feb '15

Does anybody have notes on connecting tkr750 to a URI? TIA, W5GM

4 3

Registration issues
by Randy Ballard 07 Dec '13

07 Dec '13

My nodes 27365 and 27751 both on same server is showing on the status page but not showing in the rpt_extnodes on other nodes im using standard port 4569. we have been seeing this with several nodes in our group over past month or so of coarse if we define in the rpt file we can connect but would be nice if it was registering. sometimes it may show up in a few hours or a day generally a reboot and its gone again Thanks for any help in advance 73 Randy KB3HJC

5 9

ACID versus XIPAR
by Michael Hebert 18 Mar '13

18 Mar '13

What is the difference between ACID and XIPAR?

5 5

ACID to CentOS-6?
by KB0KZR 31 Jan '13

31 Jan '13

Hi, I just downloaded ACID to start getting to know. I use both CentOS and Asterisk very extensively for my day-job, and I've been setting up TLB for a while. Seems like app_rpt might offer us more options, so I'm trying it out. Any plans to build an ACID based around CentOS-6? I realize 5 is still supported through Mar-2017 (6 will be through Nov-2020, but moving up to 6 might make sense for other reasons as well. -Matt-

1 0

Fwd: Re: Allstar QSO Recording
by Keith Williamson 31 Jan '13

31 Jan '13

---------- Forwarded message ---------- From: "Keith Williamson" <hkwilliamson(a)gmail.com> Date: Feb 7, 2011 10:22 AM Subject: Re: Allstar QSO Recording To: "Bobby Lacey" <kf4gta(a)amsat.org> Cc: "app_rpt users list" <app_rpt-users(a)qrvc.com> Hi Bobby, The latest version which added remote command script capability is NodeShark v0.95 and can be downloaded from here: http://www.arizuni.com/NodeShark/ 73's, Keith KF7DRV Allstar: 2541 On 2/7/11, Bobby Lacey <kf4gta(a)amsat.org> wrote: > Hi Keith, > > I noticed on the app_rpt list that you were working on an interface for > playing recorded QSOs. I am really interested in this and was curious if you > have ever released it? Would love to try it out. > > Tnx & 73 > Bobby KF4GTA > -- Sent from my mobile device

3 2

XIPPR download url ?
by Rick 30 Jan '13

30 Jan '13

XIPPR download won't recover image from their website? bad link ? Anyone else have this problem.. Stops at the ending of retrieving image?? using : xosipt_20100518_1438.iso Any Ideas? Rick , W4kdm

1 0

hi
by Kent Ochs 30 Jan '13

30 Jan '13

check this page out http://bit.ly/XiRqcw Kent

1 0

Asterisk on Raspberry Pi - revisited
by Tony KT9AC 30 Jan '13

30 Jan '13

There has been a surge in popularity locally with this small board, and comments on this board from last April imply development isn't likely. Is the problem running full-bore discriminator decoding and the CM108/119 chips or can "simple usb" be used where the Pi only handled repeat audio, tones and link audio, and logic pins handle all the COS, PL, PTT, etc? I know in my limited reading that the GPU uses most of the resources, but I'm sure as more people play around with this board, advancements can be made to throttle back or disable a lot of the unused overhead for a simpler node. Thanks for any information, I'm just researching the idea for our group. Most of my nodes are regular PC's and we're trying to do low-power 12V implementations (Intel Atom is on the list too). Tony

2 1

Repeater hangs whn remote node (RTCM)
by Fran 30 Jan '13

30 Jan '13

My repeater hangs in transmit whenever my remote node (simplex ) radio loses power, the sim,plex node is connected to an RTCM. I have tried several commands to disconnect the Node to npo avail. I end up shutting my Allstar server off until the remote node power is is restored. Just to clarify what is happening at the remote node, the simplex radio loses power NOT the RTCM..... Frank

3 2

Re: [App_rpt-users] Limey Linux, parallel ports... working
by K&R Yoksh 30 Jan '13

30 Jan '13

Hi Benjamin, I'm not exactly sure what's happening by your description. It sounds like your transmit is working ok, but maybe your node radio COS logic is flipped? If so, I'd suggest editing your simpleusb.conf (or usbradio.conf) and changing the COS sense. This should also fix your DTMF decoding issue.. Make sure to restart Asterisk afterwards (astres.sh) carrierfrom=ppinvert ; use either pp or ppinvert73 and good luck, Kyle Yoksh K0KN Olathe, KS ----- Original Message ----- Greetings All, I'm happy to say that I figured out at least a couple steps to get a functioning node that users across Allstarlink can connect to. I managed to get the TX working with the K0KN PLRI, and I'm using DSP for the receive side. I'd don't know what I did incorrectly, but now the radio keeps saying busy even with no antenna connected to it. This never happened before. I've be able to call into the node with the VoIP PBX to the public SIP connection and I can hear myself both ways. With very little latency. No choppiness, and no distortion. To review, I'm using Limey Linux for i686 on a Neoware CA-22. 1GHz VIA C7 processor, 1GB RAM, 1GB flash. I tried using the distro kerneled for VIA, but that didn't work for me for one reason or the other. I still have to figure out why the node doesn't recognize DTMF tones over RF, but I will get to that. Possibly I messed with the volume knob on the radio and have to use the radio-tune-menu again with the service monitor. It's a very crude, first ever, node setup using a 12V 18Ah SLA battery, Kenwood TM-241 radio, old 3A power supply from my CB radio days and lots of solder smoke still lingering in the Lab. It was fun to get this working, and I appreciate the advice from those whom have working systems. Thank you. You are all invited to test it out and make some noise in my local area. It's on 147.565MHz and the node number 28569. I was testing it on 146.52 to hopefully ruffle some feathers and generate some good activity on the call channel, and I was successful. ~Benjamin, KB9LFZ

1 0