August 2013 - App_rpt-users - lists.keekles.org

Re: [App_rpt-users] Echolink Server
by Angelo Glorioso 09 Aug '13

09 Aug '13

Thanks to all who helped. I changed the 2 server to 5 and that took care of the problem. Once again, thanks! 73 de Angelo

1 0

Parade and cards
by harvey easton 09 Aug '13

09 Aug '13

Hope the parade went well. I am sorry that I could not go, but Berniece has put her foot down on me fighting the heat. Hope you guys survived ok. If you don't have family plans, we are open for cards, our place Saturday evening. 73 Harvey PS I blew out the diodes in antenna tuner again. I can't be trusted with a AMP I guess.

3 2

Incoming dial plan when using your own SIP provider.
by Bradley Haney 09 Aug '13

09 Aug '13

Hello all.. got my system set up for outgoing calls through my own SIP provider and i got it working good. WHo could point me in the correct direction on making a dial plan for incoming calls from my sip provider.. I would like for it to ring the repeater so then we can pick up the call.. Thanks for your help.. Bradley

1 0

Re: [App_rpt-users] Echolink Server
by James Hill 08 Aug '13

08 Aug '13

My Echolink side is locked down tight - only RF links are allowed to connect, and a chosen few friends who have the common sense to ensure their audio is set up correctly before they TX! Plus I got fed up with constant connects/disconnects with nobody saying a word! James 29681 Sent from my Xperia™ smartphone "Bryan D. Boyle" <bdboyle(a)bdboyle.com> wrote: >grumpy comment re echolink: ossified technology with users about as annoying as habitual kerchunkers and hams who think that 'technician' license means they're qualified to pull out their golden screwdrivers to 'improve' their rigs. > >-- >Bryan >Sent from my iPhone 5...small >keyboard, big fingers...please >forgive misspellings... > > > >On Aug 8, 2013, at 15:40, pete M <petem001(a)hotmail.com> wrote: > >> thats what I use , but from time to time it will disconnect, the only way It will connect back is by restating the asterisk service. >> >> Envoyé de mon iPad >> >> Le 2013-08-08 à 14:16, "Vince P" <ve3elb(a)yahoo.com> a écrit : >> >>> Change all Echolink Servers to these and everything should be fine. I have been running these for many years now and never had any problems. >>> >>> naeast.echolink.org >>> nasouth.echolink.org >>> servers.echolink.org >>> backup.echolink.org >>> >>> >>> Vince VE3ELB >>> >>> On 2013-08-08, at 1:59 PM, Geoff <w5omr(a)att.net> wrote: >>> >>>> As of this writing, I've discovered by a simple ping test, that 2 of 5 echolink servers are down. >>>> >>>> They are >>>> server2.echolink.org >>>> and >>>> server4.echolink.org >>>> >>>> Now, a simple ping test isn't all that inclusive, but it stands to reason (doesn't it?) that if 1, 3 and 5 respond to icmp requests, that 2 and 4 (if they were alive) would, as well? >>>> >>>> Just logic kickin' in. >>>> >>>> adjusting /etc/asterisk/echolink.conf accordingly >>>> >>>> -Geoff/W5OMR >>>> _______________________________________________ >>>> App_rpt-users mailing list >>>> App_rpt-users(a)ohnosec.org >>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users >>> _______________________________________________ >>> App_rpt-users mailing list >>> App_rpt-users(a)ohnosec.org >>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users(a)ohnosec.org >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users >_______________________________________________ >App_rpt-users mailing list >App_rpt-users(a)ohnosec.org >http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

1 0

Echolink Server
by Angelo Glorioso 08 Aug '13

08 Aug '13

Hi All, I have noticed this is the message log and was wondering if this is normal??? [Aug 7 20:45:49] ERROR[8161] chan_echolink.c: connect() failed to connect to the Echolink server server2.echolink.org If it is normal, should I comment out the server name in the echolink.conf?? Angelo

8 9

Re: [App_rpt-users] Time
by Tim Sawyer 08 Aug '13

08 Aug '13

Yes, that should work and it does for me. Maybe your file format is bad. Also be sure you have updated source. Also, please post and reply to the app_rpt list so that other may benefit from, or partake in the discussion. Huntington*CLI> rpt localplay 2523 wd6awprepeater -- <Zap/pseudo-996666204> Playing 'wd6awprepeater' (language 'en') -- Hungup 'Zap/pseudo-996666204' Huntington*CLI> -- Tim :wq On Aug 8, 2013, at 10:13 AM, Geoff <w5omr(a)att.net> wrote: > that being said, if all sounds are in /var/lib/asterisk/sounds/ then, (logically thinking) shouldn't > > CLI> rpt localplay [node_number] filename > > work?

1 0

Re: [App_rpt-users] Echolink Server
by James Hill 08 Aug '13

08 Aug '13

I changed my 2nd line to server5.echolink.org and all is well! Sent from my Xperia™ smartphone Steve Agee <n5zua(a)earthlink.net> wrote: >Echolink Server number 2 no longer exits. Edit the line to read: > >server2=server3.echolink.org > >N5ZUA > >----- Original Message ----- >From: Geoff >To: app_rpt-users(a)ohnosec.org >Sent: Thursday, August 08, 2013 12:19 PM >Subject: Re: [App_rpt-users] Echolink Server > >On 08/08/2013 09:11 AM, Geoff wrote: > >On 08/08/2013 06:48 AM, Angelo Glorioso wrote: > >Hi All, > > I have noticed this is the message log and was wondering if this is >normal??? > >I did. My /var/log/messages was filling up, and rotating till the point I >have 4 archives of a half-meg each, all filled with the same error. > >I removed the line from the echolink.conf file. > >-Geoff/W5OMR > >I, too, have discovered by removing server2 from echolink.conf keeps me from >logging into echolink. what the he**? > >_______________________________________________ >App_rpt-users mailing list >App_rpt-users(a)ohnosec.org >http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

1 0

Re: [App_rpt-users] Time
by Tim Sawyer 08 Aug '13

08 Aug '13

Drop the file name extension. It's documented here http://ohnosec.org/drupal/node/142 -- Tim :wq On Aug 8, 2013, at 4:20 AM, Geoff <w5omr(a)att.net> wrote: > On 08/07/2013 11:50 AM, Tim Sawyer wrote: >> >> Both cron entries call scripts but the way Geoff did it is perfectly fine, it just a mater of preference. Also note the use of cmd and localplay rather than fun in these scripts. That way if the touch tones ever need to be changed the scripts will still run without modification. > > I get an error when I try to use localplay... > > W5OMR*CLI> rpt localplay 29655 /var/lib/asterisk/sounds/rpt/timeout-warning.ulaw > [Aug 8 06:18:51] WARNING[26450]: file.c:602 ast_openstream_full: File /var/lib/asterisk/sounds/rpt/timeout-warning.ulaw does not exist in any format > [Aug 8 06:18:51] WARNING[26450]: file.c:912 ast_streamfile: Unable to open /var/lib/asterisk/sounds/rpt/timeout-warning.ulaw (format 0x44 (ulaw|slin)): No such file or directory > [Aug 8 06:18:51] WARNING[26450]: app_rpt.c:9528 rpt_tele_thread: ast_streamfile failed on Zap/pseudo-1371677837 > -- Hungup 'Zap/pseudo-1371677837' > > whassup wit dat? > ;-) > > -Geoff/W5OMR >

1 0

Re: [App_rpt-users] Echolink Server
by Matthew 08 Aug '13

08 Aug '13

1 0

Question Regarding My Node Connectivity
by David Dean 08 Aug '13

08 Aug '13

Hello to the group. I am working on my first node and I am unable to make a connection to another node using my radio. I am able to connect to other nodes when using the CLI without problem. But when using the keypad on a radio I get nothing. When transmitting tones on a radio keypad and watching the CLI instead of seeing the coorect dtmf tone I see the following message "-- Hungup 'Zap/pseudo-879579846' -- Hungup 'Zap/pseduo-1210393799' -- Hungup 'Zap/pseduo-441974974' And that is it. Can someone tell me if I have a file that is messed up, missing or possibly it is my host radio connected to the node. Thanks, David -- David Dean, K0PWO Arapahoe County, Colorado (720) 350-2053 cell

3 2