December 2014 - App_rpt-users - lists.keekles.org

Re: [App_rpt-users] App_rpt-users Digest, Vol 70, Issue 20
by Bradley Haney 11 Dec '14

11 Dec '14

I will have 1 UHF vertex repeater that we are rotating out that is a work horse.. No duplexer included but its a 5000 series that works wonderful COntact me if interested kc9gqr(a)mtco.com Will be really reasonable we are doing an upgrade to digital so i will most likely have some VHF vertex machines available also.. along with a couple URI's by end of year. On Wed, Dec 10, 2014 at 9:09 PM, <app_rpt-users-request(a)ohnosec.org> wrote: > Send App_rpt-users mailing list submissions to > app_rpt-users(a)ohnosec.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > or, via email, send a message with subject or body 'help' to > app_rpt-users-request(a)ohnosec.org > > You can reach the person managing the list at > app_rpt-users-owner(a)ohnosec.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of App_rpt-users digest..." > > > Today's Topics: > > 1. 'inexpensive' radios for a local repeater (Steven Donegan) > 2. Re: 'inexpensive' radios for a local repeater (Bryan D. Boyle) > 3. Re: 'inexpensive' radios for a local repeater (Steven Donegan) > 4. Re: 'inexpensive' radios for a local repeater > (mike(a)midnighteng.com) > 5. Re: 'inexpensive' radios for a local repeater (Loren Tedford) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Thu, 11 Dec 2014 02:09:23 +0000 (UTC) > From: Steven Donegan <steve(a)donegan.org> > To: "app_rpt-users(a)ohnosec.org" <app_rpt-users(a)ohnosec.org> > Subject: [App_rpt-users] 'inexpensive' radios for a local repeater > Message-ID: > < > 813414141.8190700.1418263763397.JavaMail.yahoo(a)jws10634.mail.bf1.yahoo.com > > > > Content-Type: text/plain; charset="utf-8" > > What new or surplus radios work well with Allstar/Asterisk/DMK-URIx? I > want to set up a least cost repeater so I can learn more. TIA?____________ > Steven Donegan > KK6IVC > SSCC/NORC Life Member, Car #86 > www.sscc.us > > >

1 0

Re: [App_rpt-users] 'inexpensive' radios for a local repeater
by ronald simpson 11 Dec '14

11 Dec '14

GM300 Radios have good shielding and rf bypassing. I use them they are cheap and I buy spares. And stay away from Hamtronics. I gave up that junk decades ago. Unless you have a service monitor and a spectrum analyzer you can't keep them stable. Modern commercial radios such as Kenwood TK-805D radios are cheap, plentiful and can be programmed from the front panel. The amateur rig of choice would be the Alinco DR-x35 series radios. They are midrange in price but interface well to the URI Since your new to Allstar/Asterisk buy a URI. Don't bother with trying to modify a USB sound FOB until you have some Allstar experience under your belt. I interfaced many radios. GM300 is hard to beat for the price. Observe you power settings and use fans on tx rigs

1 0

Re: [App_rpt-users] 'inexpensive' radios for a local repeater
by mike＠midnighteng.com 11 Dec '14

11 Dec '14

You shall get a bunch of opinions here but it does depends on how inexpensive is inexpensive to you. Here is my opinion if you have 450 to spend, Use hamtronics rx and exciter... learn and reuse in actual repeater. They hold their value better than some other new equipment if you can believe that. The rx's are very sensitive .12mv/12db sinad. I use both the old rock bound units and the newer tunable synthesized units and they both work great. Buy them wired and tested and they come tuned for your freq. Easy to repair. The rock bound units are no longer sold. Sometimes a good deal found on ebay. But you better know what you are buying. They make these in the commercial freq splits also. ebay has a large selection of motorola gm300's and maxtrac/ameritrac but you will need to be able to program them and sensitivity is .20 - .34mv unless you break-out tech manual to re-align specific. And again you need to know what you are buying here also. Not all work in amateur areas. Could be the best cheap option if you can get them programed. ...mike/kb8jnm > -------- Original Message -------- > Subject: [App_rpt-users] 'inexpensive' radios for a local repeater > From: Steven Donegan <steve(a)donegan.org> > Date: Wed, December 10, 2014 9:09 pm > To: "app_rpt-users(a)ohnosec.org" <app_rpt-users(a)ohnosec.org> > > > What new or surplus radios work well with Allstar/Asterisk/DMK-URIx? I want to set up a least cost repeater so I can learn more. TIA ____________ > Steven Donegan > KK6IVC > SSCC/NORC Life Member, Car #86 > www.sscc.us<hr>_______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

2 1

Re: [App_rpt-users] Linking two nodes together
by mike＠midnighteng.com 08 Dec '14

08 Dec '14

It would be in usbradio.conf or simpleusb.conf , which ever one you are using. ;carrierfrom=no <<<<<<<<<<<<<<<<<<<<use this line loren (uncommented) ;carrierfrom=dsp ;carrierfrom=pp carrierfrom=ppinvert <<<<if using this line, change to above or comment out with a ; ;carrierfrom=usb ;carrierfrom=usbinvert ;carrierfrom=vox Passing tones is not hard to do but I think you mean dtmf tones and good luck as they will not pass. If from one app_rpt node to other app_rpt node for control, you only need to connect in command mode to control it. use dtmf: *4 (#nodenum#) to connect to node in command mode, issue commands, and use # to exit command mode when you are done. No need to pass dtmf audio wise from node to node. Commands will travel in iax stream when in command mode. ...mike/kb8jnm > -------- Original Message -------- > Subject: Re: [App_rpt-users] Linking two nodes together > From: Loren Tedford <lorentedford(a)gmail.com> > Date: Sun, December 07, 2014 7:29 pm > To: Chris Curtis <demoman(a)rollanet.org> > Cc: app_rpt mailing list <app_rpt-users(a)ohnosec.org> > > > I hate to bug everyone again on the forums here about this but I need to > also know how to pass through tones from a particular node to the repeater > node as well... Also cor=no did not work for the repeater side still kinda > baffled as to why not.. Where does the cor=no go is it the Rpt.conf or is > it the usbradio.conf file.. Thanks so much for everyone’s help! Oh the > reason for wanting to pass DTMF through the RX node is to be able to use my > auto patch that i have set up on the 2 meter side.. Really bites not having > the duplexers tuned.. > > Loren Tedford (KC9ZHV) > Email: lorentedford(a)gmail.com > > http://kc9zhv.lorentedford.com > > > On Sat, Dec 6, 2014 at 9:04 AM, Chris Curtis <demoman(a)rollanet.org> wrote: > > > I like to use: > > > > COR=NO > > > > To make it stop receiving things > > > > Chris > > KB0WLF > > > > > > > -----Original Message----- > > > From: app_rpt-users-bounces(a)ohnosec.org [mailto:app_rpt-users- > > > bounces(a)ohnosec.org] On Behalf Of mike(a)midnighteng.com > > > Sent: Friday, December 05, 2014 4:25 PM > > > To: app_rpt-users(a)ohnosec.org > > > Subject: Re: [App_rpt-users] Linking two nodes together > > > > > > > > > Loren, > > > > > > It's really not about what radios you have but the signal logic of the > > > COR line. > > > > > > If the logic for your controller is low=true meaning > > > a 0v or low voltage level means it is actively receiving, > > > > > > The when you disconnect it, > > > > > > It will be true and bring up the repeater as if it was rxing a signal > > > when you disconnect it because it is not getting a high level signal to > > > say it is inactive. > > > > > > So... > > > when you disconnect it, > > > change the logic of the signal for cor input so it does not make the > > > controller think the rx is active after you disconnect it. > > > > > > Example set the controller for high=true or a voltage level is a signal > > > for active rx when/after disconnecting the rx. > > > > > > perhaps someone else can explain it better than I. > > > > > > ...mike/kb8jnm > > > > > > > > > > -------- Original Message -------- > > > > Subject: Re: [App_rpt-users] Linking two nodes together > > > > From: Loren Tedford <lorentedford(a)gmail.com> > > > > Date: Fri, December 05, 2014 5:02 pm > > > > To: mike(a)midnighteng.com > > > > Cc: app_rpt mailing list <app_rpt-users(a)ohnosec.org> > > > > > > > > > > > > All of my current radios are CM200s VHF and UHF on both repeater > > > systems > > > > node radios are a combination of CM200s and I do have one Maxtrac VHF > > > > floating around here at the house.. Yes when i disconnect the RX side > > > or > > > > turn off the RX radio it seems to hang open the transmitter with a > > > silent > > > > hang.. Not sure about the whole cor thing didnt really change any > > > settings > > > > on the radios or the URI at least related to cor.. If you have any > > > ideas > > > > feel free to let me know will be testing a few things maybe it was > > > because > > > > it was in Duplex=2 mode at the tx site when i did this test not sure > > > when i > > > > changed the that line in the Rpt.conf to Duplex=1 > > > > > > > > Loren Tedford (KC9ZHV) > > > > Email: lorentedford(a)gmail.com > > > > http://kc9zhv.lorentedford.com > > > > > > > > > > > > On Fri, Dec 5, 2014 at 12:28 PM, <mike(a)midnighteng.com> wrote: > > > > > > > > > > > > > > > > > > > I don't know what you are "unhooking" for the rx at rptr site but > > > it > > > > > could perhaps be > > > > > "if the logic on the cor is inverted", > > > > > it would say the rx is active when not present/disconnected. > > > > > > > > > > ...mike/kb8jnm > > > > > > > > > > > > > > > > -------- Original Message -------- > > > > > > Subject: Re: [App_rpt-users] Linking two nodes together > > > > > > From: Loren Tedford <lorentedford(a)gmail.com> > > > > > > Date: Fri, December 05, 2014 1:14 pm > > > > > > To: Corey Dean <n3fe(a)repeater.net>, app_rpt mailing list > > > > > > <app_rpt-users(a)ohnosec.org> > > > > > > > > > > > > > > > > > > Corey, > > > > > > Noticed one problem if i unhook the RX side at the repeater for > > > some > > > > > reason > > > > > > it hangs the transmitter open not sure exactly what i am missing > > > here but > > > > > > if you think of some thing let me know love the *2 for connect > > > think > > > > > thats > > > > > > a great idea > > > > > > > > > > > > > > > > > > Loren Tedford (KC9ZHV) > > > > > > Email: lorentedford(a)gmail.com > > > > > > Email: lorentedford(a)live.com > > > > > > Email: lorentedford(a)aol.com > > > > > > Email: LorenCS(a)Ltcraft.net > > > > > > Email: lorentedford(a)yahoo.com > > > > > > Email: loren(a)lorentedford.com <loren(a)lorentedford.com> > > > > > > Email: loren(a)richlandcountycomputers.com > > > > > > Phone: 618-553-0806 > > > > > > http://www.lorentedford.com > > > > > > http://www.Ltcraft.net <http://www.ltcraft.net/> > > > > > > http://www.richlandcountycomputers.com > > > > > > http://kc9zhv.lorentedford.com > > > > > > > > > > > > > > > > > > On Fri, Dec 5, 2014 at 12:00 PM, Corey Dean <n3fe(a)repeater.net> > > > wrote: > > > > > > > > > > > > > Unhook the rx from the repeater site and unhook the tx from > > > your house > > > > > and > > > > > > > the. Just connect them together. You can also disable the rx > > > at the > > > > > > > repeater and do a *2 for receive only to the site at your > > > house. > > > > > > > > > > > > > > Corey > > > > > > > > > > > > > > On Dec 5, 2014, at 12:54 PM, Loren Tedford > > > <lorentedford(a)gmail.com> > > > > > wrote: > > > > > > > > > > > > > > Yes Doug was looking to link via Internet for now till I can > > > find some > > > > > one > > > > > > > that really knows how to tune Duplexers.. lol... yea I have had > > > bad > > > > > look > > > > > > > with 7 different radio communication companies around here > > > getting this > > > > > > > done either they lock open the repeater or you cant hear anyone > > > > > through the > > > > > > > recieve side of the system.. So my goal was to setup a node at > > > the > > > > > house > > > > > > > for just RX use only and set up the Transmitter at the repeater > > > site > > > > > for > > > > > > > now.. Internet link them Voice over ip node to node.. I have > > > two URIs > > > > > and > > > > > > > two cables however one cable is a repeater cable suppose i > > > could > > > > > probably > > > > > > > use this on the RX side then use the other one for the > > > transmitter.. > > > > > Just > > > > > > > guessing Special Thanks goes out to Chris Curtis will try this > > > > > thanks!! :) > > > > > > > Any other thoughts or suggestions with this project please let > > > me > > > > > know.. > > > > > > > > > > > > > > Loren Tedford (KC9ZHV) > > > > > > > Email: lorentedford(a)gmail.com > > > > > > > http://kc9zhv.lorentedford.com > > > > > > > > > > > > > > > > > > > > > On Fri, Dec 5, 2014 at 9:50 AM, Doug Crompton > > > <doug(a)crompton.com> > > > > > wrote: > > > > > > > > > > > > > >> Do you mean linking via a normal Allstar link? or linking via > > > RF. It > > > > > is > > > > > > >> not clear what you are trying to do. > > > > > > >> > > > > > > >> You can link two nodes privately if you know the IP address > > > and port > > > > > of > > > > > > >> each node. You just enter the info for the OTHER node in the > > > nodes > > > > > section > > > > > > >> of rpt.conf. Assuming you have a good Internet path once this > > > is > > > > > entered > > > > > > >> and Asterisk is restarted you should be able to connect. Of > > > course > > > > > you also > > > > > > >> need the port forwards in the routers also. > > > > > > >> > > > > > > >> [nodes] > > > > > > >> ; Note, if you are using automatic update for allstar link > > > nodes, > > > > > > >> ; no allstar link nodes should be defined here. Only place a > > > > > definition > > > > > > >> ; for your local nodes, and private (off of allstar link) > > > nodes here. > > > > > > >> > > > > > > >> 1998 = radio@ip.address.for.1999:port/1998,NONE > > > > > > >> > > > > > > >> This show one end. The other end would be just the opposite. > > > Port is > > > > > only > > > > > > >> needed if it is other than the default 4569. > > > > > > >> > > > > > > >> > > > > > > >> > > > > > > >> *73 DougWA3DSPhttp://www.crompton.com/hamradio > > > > > > >> <http://www.crompton.com/hamradio>* > > > > > > >> > > > > > > >> > > > > > > >> ------------------------------ > > > > > > >> Date: Fri, 5 Dec 2014 01:52:39 -0600 > > > > > > >> From: lorentedford(a)gmail.com > > > > > > >> To: app_rpt-users(a)ohnosec.org > > > > > > >> Subject: [App_rpt-users] Linking two nodes together > > > > > > >> > > > > > > >> > > > > > > >> Need to kinda get some examples of how to link two nodes > > > together > > > > > > >> examples lets say node 1 is at the repeater site and node 2 is > > > at my > > > > > house > > > > > > >> and lets say that I cant get some one to tune up my duplexer > > > > > properly.. > > > > > > >> what is the best way to link two nodes together to make my > > > repeater at > > > > > > >> least functional.. > > > > > > >> > > > > > > >> Thanks in advance > > > > > > >> Loren Tedford (KC9ZHV) > > > > > > >> Email: lorentedford(a)gmail.com > > > > > > >> > > > > > > >> http://kc9zhv.lorentedford.com > > > > > > >> > > > > > > >> > > > > > > >> _______________________________________________ App_rpt-users > > > mailing > > > > > > >> list App_rpt-users(a)ohnosec.org > > > > > > >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To > > > > > unsubscribe > > > > > > >> from this list please visit > > > > > > >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and > > > scroll > > > > > > >> down to the bottom of the page. Enter your email address and > > > press the > > > > > > >> "Unsubscribe or edit options button" You do not need a > > > password to > > > > > > >> unsubscribe, you can do it via email confirmation. If you have > > > trouble > > > > > > >> unsubscribing, please send a message to the list detailing the > > > > > problem. > > > > > > >> > > > > > > >> _______________________________________________ > > > > > > >> App_rpt-users mailing list > > > > > > >> App_rpt-users(a)ohnosec.org > > > > > > >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > > > > > >> > > > > > > >> To unsubscribe from this list please visit > > > > > > >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and > > > scroll > > > > > > >> down to the bottom of the page. Enter your email address and > > > press the > > > > > > >> "Unsubscribe or edit options button" > > > > > > >> You do not need a password to unsubscribe, you can do it via > > > email > > > > > > >> confirmation. If you have trouble unsubscribing, please send a > > > > > message to > > > > > > >> the list detailing the problem. > > > > > > >> > > > > > > > > > > > > > > _______________________________________________ > > > > > > > App_rpt-users mailing list > > > > > > > App_rpt-users(a)ohnosec.org > > > > > > > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > > > > > > > > > > > > > To unsubscribe from this list please visit > > > > > > > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and > > > scroll > > > > > down > > > > > > > to the bottom of the page. Enter your email address and press > > > the > > > > > > > "Unsubscribe or edit options button" > > > > > > > You do not need a password to unsubscribe, you can do it via > > > email > > > > > > > confirmation. If you have trouble unsubscribing, please send a > > > message > > > > > to > > > > > > > the list detailing the problem. > > > > > > > > > > > > > ><hr>_______________________________________________ > > > > > > App_rpt-users mailing list > > > > > > App_rpt-users(a)ohnosec.org > > > > > > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > > > > > > > > > > > To unsubscribe from this list please visit > > > > > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and > > > scroll down > > > > > to the bottom of the page. Enter your email address and press the > > > > > "Unsubscribe or edit options button" > > > > > > You do not need a password to unsubscribe, you can do it via > > > email > > > > > confirmation. If you have trouble unsubscribing, please send a > > > message to > > > > > the list detailing the problem. > > > > > _______________________________________________ > > > > > App_rpt-users mailing list > > > > > App_rpt-users(a)ohnosec.org > > > > > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > > > > > > > > > To unsubscribe from this list please visit > > > > > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and > > > scroll down > > > > > to the bottom of the page. Enter your email address and press the > > > > > "Unsubscribe or edit options button" > > > > > You do not need a password to unsubscribe, you can do it via email > > > > > confirmation. If you have trouble unsubscribing, please send a > > > message to > > > > > the list detailing the problem. > > > > > > > > _______________________________________________ > > > App_rpt-users mailing list > > > App_rpt-users(a)ohnosec.org > > > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > > > > > To unsubscribe from this list please visit http://ohnosec.org/cgi- > > > bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the > > > page. Enter your email address and press the "Unsubscribe or edit > > > options button" > > > You do not need a password to unsubscribe, you can do it via email > > > confirmation. If you have trouble unsubscribing, please send a message > > > to the list detailing the problem. > > > > _______________________________________________ > > App_rpt-users mailing list > > App_rpt-users(a)ohnosec.org > > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > > > To unsubscribe from this list please visit > > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down > > to the bottom of the page. Enter your email address and press the > > "Unsubscribe or edit options button" > > You do not need a password to unsubscribe, you can do it via email > > confirmation. If you have trouble unsubscribing, please send a message to > > the list detailing the problem. > ><hr>_______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

2 1

Allmon2 Updates
by Tim Sawyer 08 Dec '14

08 Dec '14

Updates to Allmon2 include a possible work around for Xipar missing SawStat command. This has not been tested as I don’t have Xipar. Who wants to try it? Other updates are: - astdb.txt is no longer distributed with Allmon for BBB compatibility. ACID/Limey users just run astdb.php as before. - Added astdb.txt changes to README. - Updated .ini.txt sample files. - menu.php has a bit more flexibility. - Better compatibility with private systems. - Added more example control panel commands. Allmon2 has a new github location: https://github.com/tsawyer/allmon2 -- Tim :wq

1 1

Re: [App_rpt-users] confirm bb155024773f3cc564be7184a8ccb672bbefa3f5
by Wayne 08 Dec '14

08 Dec '14

WHAT? I already have an account and that isn't my IP! I wish to remain subscribed using my existing profile. -----Original Message----- From: app_rpt-users-request(a)ohnosec.org Sent: Tuesday, February 11, 2014 11:35 PM To: wayne(a)anywherehost.net Subject: confirm bb155024773f3cc564be7184a8ccb672bbefa3f5 Mailing list subscription confirmation notice for mailing list App_rpt-users We have received a request from 184.255.0.117 for subscription of your email address, "wayne(a)anywherehost.net", to the app_rpt-users(a)ohnosec.org mailing list. To confirm that you want to be added to this mailing list, simply reply to this message, keeping the Subject: header intact. Or visit this web page: http://ohnosec.org/cgi-bin/mailman/confirm/app_rpt-users/bb155024773f3cc564… Or include the following line -- and only the following line -- in a message to app_rpt-users-request(a)ohnosec.org: confirm bb155024773f3cc564be7184a8ccb672bbefa3f5 Note that simply sending a `reply' to this message should work from most mail readers, since that usually leaves the Subject: line in the right form (additional "Re:" text in the Subject: is okay). If you do not wish to be subscribed to this list, please simply disregard this message. If you think you are being maliciously subscribed to the list, or have any other questions, send them to app_rpt-users-owner(a)ohnosec.org.

1 0

Re: [App_rpt-users] Linking two nodes together
by mike＠midnighteng.com 08 Dec '14

08 Dec '14

Loren, It's really not about what radios you have but the signal logic of the COR line. If the logic for your controller is low=true meaning a 0v or low voltage level means it is actively receiving, The when you disconnect it, It will be true and bring up the repeater as if it was rxing a signal when you disconnect it because it is not getting a high level signal to say it is inactive. So... when you disconnect it, change the logic of the signal for cor input so it does not make the controller think the rx is active after you disconnect it. Example set the controller for high=true or a voltage level is a signal for active rx when/after disconnecting the rx. perhaps someone else can explain it better than I. ...mike/kb8jnm > -------- Original Message -------- > Subject: Re: [App_rpt-users] Linking two nodes together > From: Loren Tedford <lorentedford(a)gmail.com> > Date: Fri, December 05, 2014 5:02 pm > To: mike(a)midnighteng.com > Cc: app_rpt mailing list <app_rpt-users(a)ohnosec.org> > > > All of my current radios are CM200s VHF and UHF on both repeater systems > node radios are a combination of CM200s and I do have one Maxtrac VHF > floating around here at the house.. Yes when i disconnect the RX side or > turn off the RX radio it seems to hang open the transmitter with a silent > hang.. Not sure about the whole cor thing didnt really change any settings > on the radios or the URI at least related to cor.. If you have any ideas > feel free to let me know will be testing a few things maybe it was because > it was in Duplex=2 mode at the tx site when i did this test not sure when i > changed the that line in the Rpt.conf to Duplex=1 > > Loren Tedford (KC9ZHV) > Email: lorentedford(a)gmail.com > http://kc9zhv.lorentedford.com > > > On Fri, Dec 5, 2014 at 12:28 PM, <mike(a)midnighteng.com> wrote: > > > > > > > I don't know what you are "unhooking" for the rx at rptr site but it > > could perhaps be > > "if the logic on the cor is inverted", > > it would say the rx is active when not present/disconnected. > > > > ...mike/kb8jnm > > > > > > > -------- Original Message -------- > > > Subject: Re: [App_rpt-users] Linking two nodes together > > > From: Loren Tedford <lorentedford(a)gmail.com> > > > Date: Fri, December 05, 2014 1:14 pm > > > To: Corey Dean <n3fe(a)repeater.net>, app_rpt mailing list > > > <app_rpt-users(a)ohnosec.org> > > > > > > > > > Corey, > > > Noticed one problem if i unhook the RX side at the repeater for some > > reason > > > it hangs the transmitter open not sure exactly what i am missing here but > > > if you think of some thing let me know love the *2 for connect think > > thats > > > a great idea > > > > > > > > > Loren Tedford (KC9ZHV) > > > Email: lorentedford(a)gmail.com > > > Email: lorentedford(a)live.com > > > Email: lorentedford(a)aol.com > > > Email: LorenCS(a)Ltcraft.net > > > Email: lorentedford(a)yahoo.com > > > Email: loren(a)lorentedford.com <loren(a)lorentedford.com> > > > Email: loren(a)richlandcountycomputers.com > > > Phone: 618-553-0806 > > > http://www.lorentedford.com > > > http://www.Ltcraft.net <http://www.ltcraft.net/> > > > http://www.richlandcountycomputers.com > > > http://kc9zhv.lorentedford.com > > > > > > > > > On Fri, Dec 5, 2014 at 12:00 PM, Corey Dean <n3fe(a)repeater.net> wrote: > > > > > > > Unhook the rx from the repeater site and unhook the tx from your house > > and > > > > the. Just connect them together. You can also disable the rx at the > > > > repeater and do a *2 for receive only to the site at your house. > > > > > > > > Corey > > > > > > > > On Dec 5, 2014, at 12:54 PM, Loren Tedford <lorentedford(a)gmail.com> > > wrote: > > > > > > > > Yes Doug was looking to link via Internet for now till I can find some > > one > > > > that really knows how to tune Duplexers.. lol... yea I have had bad > > look > > > > with 7 different radio communication companies around here getting this > > > > done either they lock open the repeater or you cant hear anyone > > through the > > > > recieve side of the system.. So my goal was to setup a node at the > > house > > > > for just RX use only and set up the Transmitter at the repeater site > > for > > > > now.. Internet link them Voice over ip node to node.. I have two URIs > > and > > > > two cables however one cable is a repeater cable suppose i could > > probably > > > > use this on the RX side then use the other one for the transmitter.. > > Just > > > > guessing Special Thanks goes out to Chris Curtis will try this > > thanks!! :) > > > > Any other thoughts or suggestions with this project please let me > > know.. > > > > > > > > Loren Tedford (KC9ZHV) > > > > Email: lorentedford(a)gmail.com > > > > http://kc9zhv.lorentedford.com > > > > > > > > > > > > On Fri, Dec 5, 2014 at 9:50 AM, Doug Crompton <doug(a)crompton.com> > > wrote: > > > > > > > >> Do you mean linking via a normal Allstar link? or linking via RF. It > > is > > > >> not clear what you are trying to do. > > > >> > > > >> You can link two nodes privately if you know the IP address and port > > of > > > >> each node. You just enter the info for the OTHER node in the nodes > > section > > > >> of rpt.conf. Assuming you have a good Internet path once this is > > entered > > > >> and Asterisk is restarted you should be able to connect. Of course > > you also > > > >> need the port forwards in the routers also. > > > >> > > > >> [nodes] > > > >> ; Note, if you are using automatic update for allstar link nodes, > > > >> ; no allstar link nodes should be defined here. Only place a > > definition > > > >> ; for your local nodes, and private (off of allstar link) nodes here. > > > >> > > > >> 1998 = radio@ip.address.for.1999:port/1998,NONE > > > >> > > > >> This show one end. The other end would be just the opposite. Port is > > only > > > >> needed if it is other than the default 4569. > > > >> > > > >> > > > >> > > > >> *73 DougWA3DSPhttp://www.crompton.com/hamradio > > > >> <http://www.crompton.com/hamradio>* > > > >> > > > >> > > > >> ------------------------------ > > > >> Date: Fri, 5 Dec 2014 01:52:39 -0600 > > > >> From: lorentedford(a)gmail.com > > > >> To: app_rpt-users(a)ohnosec.org > > > >> Subject: [App_rpt-users] Linking two nodes together > > > >> > > > >> > > > >> Need to kinda get some examples of how to link two nodes together > > > >> examples lets say node 1 is at the repeater site and node 2 is at my > > house > > > >> and lets say that I cant get some one to tune up my duplexer > > properly.. > > > >> what is the best way to link two nodes together to make my repeater at > > > >> least functional.. > > > >> > > > >> Thanks in advance > > > >> Loren Tedford (KC9ZHV) > > > >> Email: lorentedford(a)gmail.com > > > >> > > > >> http://kc9zhv.lorentedford.com > > > >> > > > >> > > > >> _______________________________________________ App_rpt-users mailing > > > >> list App_rpt-users(a)ohnosec.org > > > >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To > > unsubscribe > > > >> from this list please visit > > > >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll > > > >> down to the bottom of the page. Enter your email address and press the > > > >> "Unsubscribe or edit options button" You do not need a password to > > > >> unsubscribe, you can do it via email confirmation. If you have trouble > > > >> unsubscribing, please send a message to the list detailing the > > problem. > > > >> > > > >> _______________________________________________ > > > >> App_rpt-users mailing list > > > >> App_rpt-users(a)ohnosec.org > > > >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > > >> > > > >> To unsubscribe from this list please visit > > > >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll > > > >> down to the bottom of the page. Enter your email address and press the > > > >> "Unsubscribe or edit options button" > > > >> You do not need a password to unsubscribe, you can do it via email > > > >> confirmation. If you have trouble unsubscribing, please send a > > message to > > > >> the list detailing the problem. > > > >> > > > > > > > > _______________________________________________ > > > > App_rpt-users mailing list > > > > App_rpt-users(a)ohnosec.org > > > > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > > > > > > > To unsubscribe from this list please visit > > > > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll > > down > > > > to the bottom of the page. Enter your email address and press the > > > > "Unsubscribe or edit options button" > > > > You do not need a password to unsubscribe, you can do it via email > > > > confirmation. If you have trouble unsubscribing, please send a message > > to > > > > the list detailing the problem. > > > > > > > ><hr>_______________________________________________ > > > App_rpt-users mailing list > > > App_rpt-users(a)ohnosec.org > > > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > > > > > To unsubscribe from this list please visit > > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down > > to the bottom of the page. Enter your email address and press the > > "Unsubscribe or edit options button" > > > You do not need a password to unsubscribe, you can do it via email > > confirmation. If you have trouble unsubscribing, please send a message to > > the list detailing the problem. > > _______________________________________________ > > App_rpt-users mailing list > > App_rpt-users(a)ohnosec.org > > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > > > To unsubscribe from this list please visit > > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down > > to the bottom of the page. Enter your email address and press the > > "Unsubscribe or edit options button" > > You do not need a password to unsubscribe, you can do it via email > > confirmation. If you have trouble unsubscribing, please send a message to > > the list detailing the problem. > >

3 2

Re: [App_rpt-users] App_rpt-users Digest, Vol 70, Issue 15
by Bradley Haney 07 Dec '14

07 Dec '14

Hi TIm.. For ALLMON 2.. is there something different to set up.. I had ALLMON running and wanted to switch to ALLMON 2.. but my nodes just say waiting and never seem to show up.. > On Dec 7, 2014, at 4:45 PM, app_rpt-users-request(a)ohnosec.org wrote: > > Send App_rpt-users mailing list submissions to > app_rpt-users(a)ohnosec.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > or, via email, send a message with subject or body 'help' to > app_rpt-users-request(a)ohnosec.org > > You can reach the person managing the list at > app_rpt-users-owner(a)ohnosec.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of App_rpt-users digest..." > > > Today's Topics: > > 1. Allmon2 Updates (Tim Sawyer) > 2. Zoiper Unreliability (Skyler F) > 3. Re: Zoiper Unreliability (Robert Newberry) > 4. Re: Zoiper Unreliability (Doug Crompton) > 5. Re: Zoiper Unreliability (mike(a)midnighteng.com) > 6. Re: Zoiper Unreliability (Skyler Fennell) > 7. Re: Zoiper Unreliability (mike(a)midnighteng.com) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Sun, 07 Dec 2014 09:14:17 -0800 > From: Tim Sawyer <tim.sawyer(a)mac.com> > To: APP RPT <app_rpt-users(a)ohnosec.org> > Subject: [App_rpt-users] Allmon2 Updates > Message-ID: <F72CE072-839E-4EF1-8076-2D698A0BA19B(a)mac.com> > Content-Type: text/plain; charset="utf-8" > > Updates to Allmon2 include a possible work around for Xipar missing SawStat command. This has not been tested as I don?t have Xipar. Who wants to try it? > > Other updates are: > - astdb.txt is no longer distributed with Allmon for BBB > compatibility. ACID/Limey users just run astdb.php as before. > - Added astdb.txt changes to README. > - Updated .ini.txt sample files. > - menu.php has a bit more flexibility. > - Better compatibility with private systems. > - Added more example control panel commands. > > Allmon2 has a new github location: https://github.com/tsawyer/allmon2 > > > -- > Tim > :wq > >

2 1

Re: [App_rpt-users] Zoiper Unreliability
by mike＠midnighteng.com 07 Dec '14

07 Dec '14

While I can't speak specific to android phones, the iPhone will keep switching between Cell network and wi-fi. You have no say in the matter if they are both on. Since the setup is different for each, only one works per setup but the switching causes delays and will buger up your connection. There is only one way to keep it from happening. Best course of action is to "turn on airplane mode" and "then turn wi-fi on" if you are wanting to use "wi-fi". And "turn wi-fi off" if you are only wanting to use "cell network". It might not be the source of your problem, but it sure sounds like it to me. ...mike/kb8jnm > -------- Original Message -------- > Subject: [App_rpt-users] Zoiper Unreliability > From: Skyler F <electricity440(a)gmail.com> > Date: Sun, December 07, 2014 1:16 pm > To: "app_rpt-users(a)ohnosec.org" <app_rpt-users(a)ohnosec.org> > > > Has anyone experienced problems with the Zoiper iPhone app? > > Sometimes it gets stuck on transmit, and I keep pressing pound and nothing > works until I end call. This happens too often (usually 10 minutes into the > call) to be safely useable. > > -- > Skyler Fennell > amsatnet.info > KDØWHB > electricity440(a)gmail.com<hr>_______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

2 2

Re: [App_rpt-users] Zoiper Unreliability
by mike＠midnighteng.com 07 Dec '14

07 Dec '14

You might try... inserting & unplugging the headphones several times as certain models has a problem with the jack switch thinking the headphones were still plunged in.(clean internal switch if you know how, they also pick-up lint over time and hold the switch open) Again, not sure it is the problem but it sure sounds like it to me. ...mike/kb8jnm > -------- Original Message -------- > Subject: Re: [App_rpt-users] Zoiper Unreliability > From: Skyler Fennell <electricity440(a)gmail.com> > Date: Sun, December 07, 2014 5:23 pm > To: "<mike(a)midnighteng.com>" <mike(a)midnighteng.com> > Cc: "app_rpt-users(a)ohnosec.org" <app_rpt-users(a)ohnosec.org> > > > I have Also been experiencing problems with audio level. Has anyone else not been able to hear anything barely while the headphones are not plugged in even when volume is all the way up? > > > > On Dec 7, 2014, at 12:59 PM, <mike(a)midnighteng.com> <mike(a)midnighteng.com> wrote: > > > > > > > > While I can't speak specific to android phones, the iPhone will keep > > switching between Cell network and wi-fi. You have no say in the matter > > if they are both on. Since the setup is different for each, only one > > works per setup but the switching causes delays and will buger up your > > connection. There is only one way to keep it from happening. > > > > Best course of action is to "turn on airplane mode" and "then turn wi-fi > > on" if you are wanting to use "wi-fi". > > > > And "turn wi-fi off" if you are only wanting to use "cell network". > > > > It might not be the source of your problem, but it sure sounds like it > > to me. > > > > ...mike/kb8jnm > > > >> -------- Original Message -------- > >> Subject: [App_rpt-users] Zoiper Unreliability > >> From: Skyler F <electricity440(a)gmail.com> > >> Date: Sun, December 07, 2014 1:16 pm > >> To: "app_rpt-users(a)ohnosec.org" <app_rpt-users(a)ohnosec.org> > >> > >> > >> Has anyone experienced problems with the Zoiper iPhone app? > >> > >> Sometimes it gets stuck on transmit, and I keep pressing pound and nothing > >> works until I end call. This happens too often (usually 10 minutes into the > >> call) to be safely useable. > >> > >> -- > >> Skyler Fennell > >> amsatnet.info > >> KDØWHB > >> electricity440(a)gmail.com<hr>_______________________________________________ > >> App_rpt-users mailing list > >> App_rpt-users(a)ohnosec.org > >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > >> > >> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" > >> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. > > _______________________________________________ > > App_rpt-users mailing list > > App_rpt-users(a)ohnosec.org > > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > > > To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" > > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

1 0