May 2014 - App_rpt-users - lists.keekles.org

Re: [App_rpt-users] App_rpt-users Digest, Vol 63, Issue 5
by Steve Wright 03 May '14

03 May '14

On Sun, May 4, 2014 at 2:33 AM, Tim waffled: > Vi has a steep learning curve but you might as well learn it if you want to become a for real Linux guy. <esc>:wq and <esc>:q! are two vi commands you?ll want to learn right away. Google vi. >:-/ Nar sorry but vi sucks. I've grappled with it for years and I still hate its' propensity to get tangled in some mode where I have to consult the man just to exit and save. Just use nano or joe. There are plenty more interesting things to do in unix than learn some stupid overtly complicated editor, and plenty better places other than here to go on about it.. ctrl-d, ctrl-enter > > > > > > ~$ cat | grep ">" | wc -l 96 grumble, reminder to trim. shift/ctrl/end delete.

1 0

echo
by Ken 03 May '14

03 May '14

Skyler If you put your echolink station on your local IP, with the required port forwarding, you can still run an echolink client locally using one of the public proxy nodes. It's a good way to check your own link, in fact. 73 Ken

1 0

Re: [App_rpt-users] echolink udp and tcp
by mike＠midnighteng.com 03 May '14

03 May '14

1 0

Re: [App_rpt-users] Changing Courtesy Tones, and SSHing into the computer
by mike＠midnighteng.com 03 May '14

03 May '14

1 0

BBB back in stock at Adafruit again
by Doug Crompton 02 May '14

02 May '14

The version B is back in stock again this afternoon at Adafruit. This may be your last chance to get the $45 board. 73 Doug WA3DSP http://www.crompton.com/hamradio

1 0

New BBB C version
by Doug Crompton 02 May '14

02 May '14

I had an order in with MCM electronics for a BBB that was on backorder. They called this morning about my order and said that they will be shipping the C version and asked if I wanted the upgrade. I accepted the upgrade and it is now on back order and will be shipped next week. The new price is $52.95. The C version has 4G vs 2G eMMC and everything else is the same. It should work the same as the B version. 73 Doug WA3DSP http://www.crompton.com/hamradio

1 0

install questions
by James H Vernetti 02 May '14

02 May '14

I setup node 27620 in early 2011 and it has run since with no problems, now I want to install on a different computer and am having a problem, when I get to the download configuration step I get "fatal error: could not modify asterisk config files". Also I am unsure of the password, does it want the password I use to log on to the Allstarlink.org or does it want the secure pin number? I have tried it both ways with the same result.

2 1

Re: [App_rpt-users] What to do with new computers
by DwaineGarden＠rogers.com 02 May '14

02 May '14

Thanks I will try that. I noticed that the only two parts that would not compile was app_rpt and voter. I could just move off Centos and go to fedora with svn and the two dahdi patches. Sent from my HTC ----- Reply message ----- From: "Doug Crompton" <doug(a)crompton.com> To: "app_rpt-users(a)ohnosec.org" <app_rpt-users(a)ohnosec.org> Subject: [App_rpt-users] What to do with new computers Date: Thu, May 1, 2014 11:01 Steve, Not sure why you would have to do that or make any other "patches." I compiled in Debain and Ubuntu with the stock svn. Of course you need to satisfy a number of dependencies, etc. I have a PC Debian box running the current svn without problems. I did that just to make sure it would work under Debian when I was doing RPi testing. The only change I ever had to make was compiling for the RPi. That was in the assembler compilation of code for the armv6 in codecs/gsm. It did not like the machine type there. That has nothing to do with the PC compile though and it was not a problem with the V7 BeagleBone. 73 Doug WA3DSP http://www.crompton.com/hamradio > Date: Thu, 1 May 2014 10:37:24 -0400 > From: szingman(a)msgstor.com > To: app_rpt-users(a)ohnosec.org > Subject: Re: [App_rpt-users] What to do with new computers > > I'm sure this is the wrong way to do this but... > Change ASTERISKVERSIONNUM=999999 in asterisk/Makefile > to ASTERISKVERSIONNUM=9999 > > This works for me on Debian 7. I have a couple of other patches to get > it working under Debian but this will let you compile. > > > 73, Steve N4IRS > > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. >

1 0

Re: [App_rpt-users] What to do with new computers
by Steve Zingman 01 May '14

01 May '14

I'm sure this is the wrong way to do this but... Change ASTERISKVERSIONNUM=999999 in asterisk/Makefile to ASTERISKVERSIONNUM=9999 This works for me on Debian 7. I have a couple of other patches to get it working under Debian but this will let you compile. 73, Steve N4IRS

3 5

Re: [App_rpt-users] What to do with new computers
by Steve Zingman 01 May '14

01 May '14

Dwaine, I replied to Andy instead of you. oops Try svn export instead of svn checkout and see it asterisk compiles for you. 73, Steve N4IRS >I noticed last night that svn acid asterisk failed to compile on >centos with kernel 3.2.55. App_rpt crapped out with an >ast_config_load having too many parameters. The New_Asterisk playing >a role? >I was just looking for a newer kernel on centos. So far the dahdi >drivers have loaded and complied fine with the svn patches on my new >i5 computer. >Once the asterisk compiles, I should be good. I setup the UEFI to >compatibility mode and it installed centos/acid fine. No problems >there..... >Dwaine

1 0