May 2014 - App_rpt-users - lists.keekles.org

Experimenting with loading Asterisk w/o using ACID CD
by Bob 12 May '14

12 May '14

I ran an experiment this weekend building a new server, and have some questions. I could not get the computer BIOS to boot with a basic network interface, so began with CentOS 5.10 DVD, which installs the drivers. (The ACID CD could not see the network when attempting to download phase1.sh.) I then used the scripts from the ACID CD to install Asterisk/app_rpt. I manually downloaded and phase1.sh (using parts of ks.cfg on the command line), and made the script executable, then went from there to complete the "ACID" install. It worked great as a method to get past the lack of initial network driver, and the node is registered on Allstarlink.org. I have a couple of issues. 1) The new boot gives me a fail for ip6table load. The CentOS 5.10 did not have this error on reboot after the load. It only occurs after "completing the load" with the ACID scripts. How is this used in ACID, and is it necessary? Is it used for security setup? 2) The build has the same issue with not being able to comm correctly with the URI as I've had with other computers where the chipset and build are not compatible. I did not check the compatibility with the CentOS 5.10 build before the "ACID" install. I use the uridiag program to determine compatibility (asterisk off). I'm thinking of attempting this with CentOS 6.5, but suspect the overwrite from executing the ACID scripts, which download Asterisk updates, with not be compatible. I'm wondering if I can go directly from CentOS 5.10, or 6.5 using the astinstall.sh script Any suggestions? Still a Linux newbie sorting out his options. Thanks, r/Bob kk6ecm

1 0

code 1
by Russ WL7LP 11 May '14

11 May '14

Howdy Folks, My allstar box has been down for a few months due to not having Internet connection. I got internet back finally and I just fired it up my allstar box today it has my node 29332 and 29265 in it. once it boots up, I get Asterisk end with exit status 1 Asterisk died with code 1 Automatically restarting Asterisk mpg123: no process killed that will keep repeating over and over until I shut the machine off. can someone tell me why this is doing this. the system was running fine before the internet was lost 73 Russ WL7LP

4 3

Frogs
by David Osborn 10 May '14

10 May '14

Just typed this at my AllStar CLI: bride*CLI> frog 2 ... and got this result: "A frog in a blender with a base diameter of 3 inches going 601114350787.189575 RPM will be travelling at warp factor 2.000000, based upon the Jacobsen Frog Corollary." Some questions: 1. Does this apply to just any old frog, or is there a specific type in mind. (African or European frogs, perhaps) 2. With the blender whizzing at 600 trillion RPM, how long would the bearings last? 3. Errrmmm - why (does app_rpt have such a calculation)?? 4. Duuuude - What's your favourite colour? J

1 0

Allstar on the BBB
by Doug Crompton 10 May '14

10 May '14

I know there are a number of people out there waiting patiently for the BBB Allstar image so they can play with their newly acquired BBB's. I am happy to report that the answer is very soon, probably early next week. There were a few issues mostly not related to Allstar that had to be worked out. One was a boot issue that appears to be resolved. I have created a web page with instructions and the image will be downloaded from there. I expect to release this to a selected test group tomorrow or the next day for initial testing before I publicize the download page. So the answer is very soon! Thank you for your patience. 73 Doug WA3DSP http://www.crompton.com/hamradio

4 4

Error
by Angelo Glorioso 10 May '14

10 May '14

Am I correct to say port 4569 is not open with this error?? [May 9 09:07:13] WARNING[29666]: chan_iax2.c:10127 iax2_do_register: REGISTER-LOG: Sending registration request for '29882' 7 3 de Angelo

3 3

Re: [App_rpt-users] Error
by Angelo Glorioso 09 May '14

09 May '14

I think you are right Andrew. T-Mobile. America's First Nationwide 4G Network Andrew Sylthe <asylthe(a)kc9ona.com> wrote: Angelo, I don't believe that to be an error. I constantly see the same in my logs and it isn't an issue: [May 9 15:49:33] WARNING[509]: chan_iax2.c:10127 iax2_do_register: REGISTER-LOG: Sending registration request for '27220' [May 9 15:49:34] WARNING[511]: chan_iax2.c:7690 registry_rerequest: REGISTER-LOG: registry rereqquest The "warning" is notifying you that a registration request was sent. Thanks! On Fri, May 9, 2014 at 9:11 AM, Angelo Glorioso <n5uxt(a)hotmail.com> wrote: > * Am I correct to say port 4569 is not open with this error??* > > > > *[May 9 09:07:13] WARNING[29666]: chan_iax2.c:10127 iax2_do_register: > REGISTER-LOG: Sending registration request for '29882'* > > > *7 3 de Angelo* > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down > to the bottom of the page. Enter your email address and press the > "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email > confirmation. If you have trouble unsubscribing, please send a message to > the list detailing the problem. > -- Andrew Sylthe KC9ONA

1 0

Re: [App_rpt-users] Error
by Angelo Glorioso 09 May '14

09 May '14

T-Mobile. America's First Nationwide 4G Network Andrew Sylthe <asylthe(a)kc9ona.com> wrote: Angelo, I don't believe that to be an error. I constantly see the same in my logs and it isn't an issue: [May 9 15:49:33] WARNING[509]: chan_iax2.c:10127 iax2_do_register: REGISTER-LOG: Sending registration request for '27220' [May 9 15:49:34] WARNING[511]: chan_iax2.c:7690 registry_rerequest: REGISTER-LOG: registry rereqquest The "warning" is notifying you that a registration request was sent. Thanks! On Fri, May 9, 2014 at 9:11 AM, Angelo Glorioso <n5uxt(a)hotmail.com> wrote: > * Am I correct to say port 4569 is not open with this error??* > > > > *[May 9 09:07:13] WARNING[29666]: chan_iax2.c:10127 iax2_do_register: > REGISTER-LOG: Sending registration request for '29882'* > > > *7 3 de Angelo* > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down > to the bottom of the page. Enter your email address and press the > "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email > confirmation. If you have trouble unsubscribing, please send a message to > the list detailing the problem. > -- Andrew Sylthe KC9ONA

1 0

RTCM and IPv6
by ssedgwick 09 May '14

09 May '14

Hi All, Working on a temporary RTCM setup to use while at the Dayton Hamvention and while at the hotel that does not have wired Ethernet. What I'm trying to do is connect the RTCM via the Ethernet port to my Windows laptop that is tethered to my Sprint mobile phone that has internet. I know there are much better ways of doing this, but this is what I have available without additional cost, and it's only going to be used for a couple days. I have internet connection sharing turned on so the tethered internet connection is available on the Windows laptop Ethernet connection. I have tested the Ethernet connection by connecting another Windows computer to the tethered laptops shared Ethernet connection and it works fine, but when I connect the RTCM it never connects. I have DHCP enabled on the RTCM. Looking at the tethered laptop ipconfig screen we see both IPv4 and IPv6 addresses listed, but I'm not sure it that the issue or if it's something else. Any ideas what I could try to make this work. Thanks, Steve_WB8GRS

2 1

Changing Courtesy Tones, and SSHing into the computer
by Skyler F 09 May '14

09 May '14

Hello, I am new ham in high school, and finally got a little SIMPLEX repeater up and running. *My first question* Is about SSHing into the computer remotely. I first gave it a try on my LAN, because I knew port forwarding would not be required. First, I *Changed *the port 222 to port 22 on the SSHD_Config file We are using an apple airport router, which states the LAN address of the Ethernet port is 10.0.1.1. I typed ssh root(a)10.0.1.1, and I got a connection refused. I was able to reverse SSH back to my macintosh using ssh username@computersLANip from ACID, but when I tried to SSH back to acid, it would not work. Just Connection Refused. After I login on ACID it says Root@Skylersnode, my node, and I also gave ssh root@<node number> and ssh skylersnode@local IP a try, but still no success. Are there any suggestions on getting this to work? *Second question: Courtesy tones,* I just figured out how to create a ULAW on audacity, and mount a flash drive on the command, and I am wondering if I can change the courtesy tones or any other audio file. Like the "I OWN COMMAND" annoying thing. Where would the courtesy tones be located, and under what file name? *Third question: *why it wont work on the web transceiver When I dial in the node on the web transceiver, nothing happens, and when I hit the connect button, it does not do anything. Is there any way to get it to work, or will the web transceiver not work with my node. I would think it should work, because I have almost the same setup as Willem's node, 29571<https://allstarlink.org/portal/webtransceiver-frameset.php?nodenum=29571>,on saddle back mountain. *Last Question: Won't connect to 28298 or 28299* This node is part of the FUN system here in Colorado, and I tried dialing 28298, which belongs to Jeff KØJSC, but I heard nothing, not even the change in courtesy tone. He has no idea why my node will not connect up, but it is weird because it won't even show up on the web transceiver. Thanks Skyler KDØWHB

8 12

RTCM and voting setup
by Mark Johnston 09 May '14

09 May '14

Hello everyone, Trying to setup 2 RTCM's for voting - starting off with 1 for the master timing source - no Radio. and one currently at the same site for testing purposes, both have GPS configured & working. The radio is a GE Mastr II base - I located a point where the CTCSS decoder gets the discriminator audio and removed the board for CTCSS decode. Plugged in the audio to the RTCM there. I do hear the audio, but am having multiple issues, first audio sounds OK locally (repeat) but the biggest issue there is the PL is loud and plfilter = y in the voter.conf appears to do nothing for that. Second issue I am not seeing a way to decode PL either in the RTCM or in asterisk from a voter. I know with usbradio/simplusb it has the option but from what I know those are not going to do anything here? also during the RTCM setup the SQ adjustment appears to calibrate go from flashing to solid on the LD3 indicator. but when adjusting the SQ pot 10 , 50 , or 150 turns does nothing to extinguish the LD3 as it should, unless I am misunderstanding the directions - does not make sense. Anyone know if there is something I could be missing? below are the rpt.conf (partial) and voter.conf files rpt.conf ---- [28344] ; Change this to your assigned node number rxchannel=voter/28344 duplex=2 ;erxgain=-3 ;etxgain=3 ;controlstates=controlstates scheduler=schedule28344 morse=morse28344 macro=macro28344 functions=functions28344 phone_functions=functions28344 link_functions=functions28344 telemetry=telemetry wait_times=wait-times context = radio callerid = "Repeater" <0000000000> idrecording = |iKC7DMF accountcode=RADIO hangtime=100 althangtime=100 totime=530000 idtime=540000 politeid=3000 idtalkover=|iKC7DMF unlinkedct=ct2 ;discpgm=yourdisconnectprogram ;lnkactenable=0 ;lnkacttime=1800 ;lnkactmacro=*52 ;lnkacttimerwarn=30seconds ;remote_inact_timeout=1800 ;remote_timeout=3600 nounkeyct=0 ;holdofftelem=0 beaconing=0 linktolink=yes telemdefault=2 propagate_dtmf = yes propagate_phonedtmf = yes ; ; *** Status Reporting *** ###### /etc/asterisk/voter.conf ;[general] port = 667 buflen = 500 password = pwblah [28344] 1306 = pw1blah,master plfilter = y thresholds = 255,110=5 linger=6 1300 = pw2blah,transmit plfilter = y thresholds = 255,110=5 linger=10 ##### Thanks, Mark KC7DMF

2 2