May 2014 - App_rpt-users - lists.keekles.org

Dial-up on the BeagleBone Black
by James R. Pilgram 26 May '14

26 May '14

Aloha from Kauai, Just wondering if anyone else besides me has tried to dial into the BeagleBone Black using the Allstar Telephone Portal. I get as far as the last command and Allison says "Please Wait While You're Being Connected" then I get a busy signal. Is there any place I should be looking for anything special in a .conf that may be missing ? I'm not even sure where to look or what to look for. Can someone point me in the right direction and give me a push. As a side note, I have other normal nodes under club call signs I have no problem dialing into. Jim Pilgram NH6HI

1 0

Re: [App_rpt-users] Incoming link connection volume
by Jim Duuuude 26 May '14

26 May '14

Gosh.. gee... I would have NEVER guessed that he was asking that..... If you adjust your LOCAL audio levels properly, THIS SHOULDNT HAPPEN!!! In no way, shape or form, should there be a reason to have to adjust the levels (inbound or outbound) of other Allstar links. Everyone adjusts their levels to the same standards. That, in telecom terms, is called a VNL (Via Net Loss) plan (for transmission levels). We have one. We use it. It works. If what you are talking about is OTHER networks, such as connections from Echolink, TLB, etc, that is another story...... Jim WB6NIL From: wd0ekr(a)msn.com To: telesistant(a)hotmail.com Subject: Re: [App_rpt-users] Incoming link connection volume Date: Mon, 26 May 2014 08:50:46 -0600 I think he is asking how to adjust the audio level of the signal coming in over the internet, I would like to know how to do that also. The local audio levels are fine but the incomming internet audio is high ----- Original Message ----- From: Jim Duuuude To: kk6ecm ; app_rpt mailing list Sent: Monday, May 26, 2014 8:45 AM Subject: Re: [App_rpt-users] Incoming link connection volume Sounds like you dont have your rx/tx (local) levels set properly. Jim > From: kk6ecm(a)gmail.com > Date: Mon, 26 May 2014 03:43:40 -0700 > To: app_rpt-users(a)ohnosec.org > Subject: [App_rpt-users] Incoming link connection volume > > Is there a way to adjust the incoming volume of a connected link? Some connections seem to over drive the transmitter? Normal repeater function works quite well. > > Thanks, > Bob > kk6ecm > > Sent from iPad > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users(a)ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

3 4

Turn off link connect announcements
by Michael Miller 26 May '14

26 May '14

Is there a way to turn the announcements of the nodes connecting ans disconnecting in the background? It is probably something simple I am missing . Thanks Mike N6IQY node 27522

2 1

Incoming link connection volume
by kk6ecm 26 May '14

26 May '14

Is there a way to adjust the incoming volume of a connected link? Some connections seem to over drive the transmitter? Normal repeater function works quite well. Thanks, Bob kk6ecm Sent from iPad

2 1

Re: [App_rpt-users] Default tailmessages? /timers
by mike＠midnighteng.com 26 May '14

26 May '14

2 1

Decode two PL tones
by Robert Newberry 26 May '14

26 May '14

I'd like my repeater to be able to decode two different PL tones. For no special reason other than my repeater used to be on the air under a different PL tone. I've changed the PL tone to be in line with other repeaters. I thought it would be nice for people running old commercial gear to not have to get their x9000s programed right away. Is anyone doing this? If so could you provide me and example of how it's laid out in your conf.

1 0

Zoiper
by Robert Newberry 26 May '14

26 May '14

Thanks to everyone who helped, I have zoiper working just fine.

1 0

Re: [App_rpt-users] use of pp I/O for two nodes in same PC
by mike＠midnighteng.com 25 May '14

25 May '14

3 2

Re: [App_rpt-users] Defaul tailmessages?
by mike＠midnighteng.com 25 May '14

25 May '14

1 0

Re: [App_rpt-users] use of usb serial on hf remotes
by mike＠midnighteng.com 25 May '14

25 May '14

2 1