May 2014 - App_rpt-users - lists.keekles.org

Re: [App_rpt-users] Defaul tailmessages?
by mike＠midnighteng.com 25 May '14

25 May '14

2 1

App-rpt parallel port
by K&R Yoksh 25 May '14

25 May '14

Hi George, You can run multiple nodes with the parallel port. I have 4 parallel port nodes here at the QTH.. I'm a big fan of the parallel port and SimpleUSB... 73, Kyle K0KN Allstar 2210-2219

1 0

Re: [App_rpt-users] Allstar on the BBB
by Doug Crompton 25 May '14

25 May '14

Bobby, The second beta just went out and all is looking very good. I would say next week. The holiday has it delayed a little. I can report it is working fine on both the rev B and rev C boards. 73 Doug WA3DSP http://www.crompton.com/hamradio Date: Thu, 22 May 2014 08:51:41 -0400 Subject: Re: [App_rpt-users] Allstar on the BBB From: kf4gta(a)contesting.com To: doug(a)crompton.com Hi Doug - Looking forward to installing app_rpt on my BBB. Just wanted to check in and make sure I haven't missed the announcement? I checked your page, but didn't see the link to the image yet. Thanks for your work on this! 73 de Bobby KF4GTA

2 1

Defaul tailmessages?
by Bob 25 May '14

25 May '14

For some reason, my new ACID load (new computer) is not playing my commanded tailmessagelist, but is playing what sounds like a default tailmessage; female voice giving the time. What could be the issue? I'm using the same tailmessage lines from another setup that is playing my recorded message. Thanks, Bob kk6ecm

1 0

use of pp I/O for two nodes in same PC
by George Csahanin 25 May '14

25 May '14

Hey guys, before I start putting this together I have a question. I’m putting two nodes on one PC. One node is the usual repeater. The other is a FT897 type remote base. I really like using the parport for cos/keying. And I want to use the same PC’s port for both radios. As long as I keep the ppx=?? stuff within a particular radios node stanza will it work? Or if I have a ptt specified for one radio do I not have the ability to have another ppx=ppp under the “other node” even if (obviously) different pins for each. Like this: [general] [usb2428] hdwtype=0 rxboost=0 txboost=1 carrierfrom=ppinvert ctcssfrom=no txmixa=voice txmixb=no invertptt=0 duplex=0 rxondelay=12 eeprom=0 pp10=cor pp4=ptt [usb28599] hdwtype=0 rxboost=0 txboost=0 carrierfrom=ppinvert ctcssfrom=no txmixa=voice txmixb=voico invertptt=0 duplex=0 rxondelay=0 eeprom=0 pp2=ptt pp11=cor So before I go build this up I’m curious about this point. If it won’t fly I’ll add another PC for remote base controller. I have a few D945GCLF boards. I’d move the remote base to one using Limey George J Csahanin W2DB Cedar Park, TX 512-401-2630 home 401-338-0568 cel

1 0

IaxRPT
by Robert Newberry 23 May '14

23 May '14

I downloaded zopier to my Android device. I already run iaxrpt on my windows laptop. There really isn't much for settings. For whatever reason my phone will not register. Anyone have any idea what I'm missing.

1 0

Re: [App_rpt-users] No longer registered [SOLVED]
by Robert Newberry 23 May '14

23 May '14

Finally after read and rereading. I got it I had to go into the CLI and reload all configuration files. I think all of the baby steps I made got me to the point where things were good. I just needed to restart asterisk and reload all files. Thanks to all who helped me off list.

1 0

Re: [App_rpt-users] No longer registered
by Robert Newberry 23 May '14

23 May '14

Well I found out thru reading drupal trouble shooting. I couldn't ping google I fixed that and can ping different search engines. Running nscheck.sh shows all four nodes down. My search-fu has yielded me some success. I'm unsure what I should look at now if nscheck.sh shows nodes down. Or am I barking up the wrong tree?

1 0

No longer registered
by Robert Newberry 23 May '14

23 May '14

So I've had a few problems that were solved with help. Asterisk kept crashing. I ended reinstalling cent os and asterisk on the same PC. The problem is my node is not showing up on the allstar site. It shows up on the system wide list but says no longer registered. I've forwarded 4569 in my router. I'm a novice at this and not sure what I'm doing wrong. As far as I can tell f48m using the netstat command the PC is all set.

2 1

Re: [App_rpt-users] SIP security
by Steve Wright 22 May '14

22 May '14

> Any tips on a way to secure SIP dial-in with unique password for > each user? > What have you read so far? You must be aware at least, that each connecting SIP device has some password? Strongly recommend installing a SIP distro with a nice easy web-admin interface, and learn how to use that, then come back with questions on how to trunk it with your app_rpt box. Alternately, someone on the list might offer some suggestion on which system might be easier to trunk with app_rpt - may save you some wasted time installing something that will never work. I've never done it. S

1 0