November 2015 - App_rpt-users - lists.keekles.org

acl.c: is not a valid IP
by HB9EYQ 08 Nov '15

08 Nov '15

I'm seeing this warning in my asterisk log - do I have a bad setting in a conf file somewhere? [Nov 8 22:23:55] WARNING[737] acl.c: is not a valid IP Thanks 73 Larry HB9EYQ

2 1

Please help Me with a Test Connect - Thanks!
by Dan Hyman 08 Nov '15

08 Nov '15

Can someone give me a hand and try to connect to me at #41477 I need to verify that I can get an incoming connect from outside the boundaries of my ISP. I am having issues receiving incoming connects. This system has been known good & up and running for months, but in last two weeks I have incoming connect issues. I suspect that my ISP has closed these ports. They are forwarded and installed correctly on my router, Thank You, If you can not connect to me on allstar node 41477 then please try EchoLink # 4123 which is working and known good. -Dan KM6HK

1 0

IaxRpt and Wine
by Ed Wilhelm 08 Nov '15

08 Nov '15

Anyone having issues with IaxRpt running under Wine? Had been running fine on Mint 17 and wine 1.6. but it quit several weeks ago. It does something very strange. Receive works fine and the first time you press PTT everything is fine, but the next time the PTT lights up red but transmitter does not key and no audio shows on vu meter. It does the same thing with different nodes. Found out another guy running Mint has the same problem. Tried Wine 1.7 but no change. I have OpenSuse Leap42 running as a VM with Wine 1.7 and it seems to work fine. Any ideas gurus? Ed W8VT

3 3

Re: [App_rpt-users] DIAL
by Steve Zingman 08 Nov '15

08 Nov '15

Great, Seems to be a lot of HP thin clients in use. Steve On 11/08/2015 09:05 AM, 41.2 Jim wrote: > moved my Allstarlink node from a full size Dell desktop to an HP5740E > Thin Client 4g flash drive & 2g memory so in short went from 130 watts > of power A/C to running on the same P/S as the repeater @12v 20 watts > power and running flawlessly for 3 weeks > > > Jim Frederick KF6QBW > 444.825+ PL100.0 Hz. Repeater > WINsystem Affiliate # 93 > EchoLink Node 828611 > AllStar Node # 28839 > YSF Node # 11113 > Transmit to Live & Live to Transmit > > On Sun, Nov 8, 2015 at 5:52 AM, Steve Zingman <szingman(a)msgstor.com > <mailto:szingman@msgstor.com>> wrote: > > Jim, > Good to hear everything is going well. What hardware are you > running on? > > 73, Steve N4IRS > > > On 11/08/2015 04:47 AM, 41.2 Jim wrote: >> FYI: >> I've installed the new DIAL, Debian version software, >> upgrading from the ACID install for Allstarlink and I could not >> be any happier.... I found the install so much easier to install >> and could say it "holds your hand" all the way through, and any >> mistakes can easily be restarted again with a simple >> command,(portal, network ect..) . At least I found it a lot more >> simple than the ACID install. >> It has been rock solid since the install, about 3 weeks now, >> and is faster in every way, the reboot is only a 10 seconds until >> you are back to the log in, as my ACID install would hang at the >> "sendmail" part of the re-load. >> I am a Windows guy and I know almost nothing about Linux, >> this new software was "Cake" to install >> >> I have now started to help friends to upgrade to the new DIAL >> software, as I said it's very easy change. Thought you all should >> know >> >> Thanks to all that was involved in this new software >> >> Jim Frederick KF6QBW >> >> >> >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users(a)ohnosec.org <mailto:App_rpt-users@ohnosec.org> >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users >> >> To unsubscribe from this list please visithttp://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" >> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. > > -- > "Anything is possible if you don't know what you are talking about." > 1st Law of Logic > > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)ohnosec.org <mailto:App_rpt-users@ohnosec.org> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and > scroll down to the bottom of the page. Enter your email address > and press the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email > confirmation. If you have trouble unsubscribing, please send a > message to the list detailing the problem. > > -- "Anything is possible if you don't know what you are talking about." 1st Law of Logic

1 0

DIAL
by 41.2 Jim 08 Nov '15

08 Nov '15

FYI: I've installed the new DIAL, Debian version software, upgrading from the ACID install for Allstarlink and I could not be any happier.... I found the install so much easier to install and could say it "holds your hand" all the way through, and any mistakes can easily be restarted again with a simple command,(portal, network ect..) . At least I found it a lot more simple than the ACID install. It has been rock solid since the install, about 3 weeks now, and is faster in every way, the reboot is only a 10 seconds until you are back to the log in, as my ACID install would hang at the "sendmail" part of the re-load. I am a Windows guy and I know almost nothing about Linux, this new software was "Cake" to install I have now started to help friends to upgrade to the new DIAL software, as I said it's very easy change. Thought you all should know Thanks to all that was involved in this new software Jim Frederick KF6QBW

2 1

AllStar Demo in 1 hour
by Skyler F 07 Nov '15

07 Nov '15

Please connect to 41694 for an ALlStar demo at the 285 techconeect techfest This will be in 1 hour, 11:30 Mountain Time 73 Skyler KD0WHB

1 0

Re: [App_rpt-users] App_rpt-users Digest, Vol 81, Issue 18
by Mark DuMoulin ＠ WB2ERS 06 Nov '15

06 Nov '15

Hello all, I'm trying to configure a URI USB FOB on my ACID Server. I appear to have everything set up ok however my CTCSS polarity (Pin 7 of the URI) is reporting activity inverted. I have tried setting ctcssfrom=usbinvert however it does not invert the signal. I am not using COS. I have it set to carrierfrom=no Any ideas anyone? Mark DuMoulin WB2ERS Wb2ers(a)metcom.com C 800-410-3130 -----Original Message----- From: app_rpt-users-bounces(a)ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of app_rpt-users-request(a)ohnosec.org Sent: Wednesday, November 04, 2015 12:00 PM To: app_rpt-users(a)ohnosec.org Subject: App_rpt-users Digest, Vol 81, Issue 18 Send App_rpt-users mailing list submissions to app_rpt-users(a)ohnosec.org To subscribe or unsubscribe via the World Wide Web, visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users or, via email, send a message with subject or body 'help' to app_rpt-users-request(a)ohnosec.org You can reach the person managing the list at app_rpt-users-owner(a)ohnosec.org When replying, please edit your Subject line so it is more specific than "Re: Contents of App_rpt-users digest..." Today's Topics: 1. RFI on Baofeng Node with sound fob. (Skyler F) (B. McIntosh [Pace]) 2. Re: Rambling thoughts... (David KE6UPI) 3. CIV Control for Kenwood TS-2000 (Randall Wright) ---------------------------------------------------------------------- Message: 1 Date: Tue, 3 Nov 2015 17:45:28 -0000 From: "B. McIntosh [Pace]" <bmcintosh(a)paceprofessional.co.uk> To: <app_rpt-users(a)ohnosec.org> Subject: [App_rpt-users] RFI on Baofeng Node with sound fob. (Skyler F) Message-ID: <E6CABF88870B4B338CFC9783AE1C3822@HPBernie> Content-Type: text/plain; charset="us-ascii" Hi, The node that I built for a Baofeng UV5R is not the cleanest sounding in the world. There is a slightly perceptible "buzzing" on TX audio. It doesn't get a lot of use and its purpose in life is as part of an emcomm system. The speech itself comes over sifficiently clear so I haven't tried anything yet to cure it. This one uses the DMK URI and is built into a Hammond diecast box. You can see photos of it at http://www.feednet.org.uk/remotebase.htm 73 Bernie GM4WZG -----Original Message----- From: app_rpt-users-bounces(a)ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of app_rpt-users-request(a)ohnosec.org Sent: 03 November 2015 17:00 To: app_rpt-users(a)ohnosec.org Subject: App_rpt-users Digest, Vol 81, Issue 17 Send App_rpt-users mailing list submissions to app_rpt-users(a)ohnosec.org To subscribe or unsubscribe via the World Wide Web, visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users or, via email, send a message with subject or body 'help' to app_rpt-users-request(a)ohnosec.org You can reach the person managing the list at app_rpt-users-owner(a)ohnosec.org When replying, please edit your Subject line so it is more specific than "Re: Contents of App_rpt-users digest..." Today's Topics: 1. RFI on Baofeng Node with sound fob. (Skyler F) ---------------------------------------------------------------------- Message: 1 Date: Tue, 3 Nov 2015 08:54:09 -0700 From: Skyler F <electricity440(a)gmail.com> To: "app_rpt-users(a)ohnosec.org" <app_rpt-users(a)ohnosec.org> Subject: [App_rpt-users] RFI on Baofeng Node with sound fob. Message-ID: <CAJNyT09tu=M13ZxTLWPA+mo9LPKOqE39Qmx3yMGvr1FqzVq5LA(a)mail.gmail.com> Content-Type: text/plain; charset="utf-8" To this day every Baofeng Node with a modified sound fob I have built has had some RF problem or another. The first node had a horrible bus noise whine through the transmit audio. My next nodes have weird issues, where when the transmitter drops, the node double-keys or even triple-keys, and I hear the courtesy beep a few times. Lastly, the sound fob is giving me a lot of RF noise on all UHF frequencies while my node is not transmitting and will break a Carrier Squelch handheld if the HT is within 5 feet or so of the node. How does this node not have any problems?: http://www.kg5ebi.com/uncategorized/the-smallest-all-star-node/ What is the best way to kill this RF issue? Skyler KD0WHB

1 0

AllStar Link Demonstration
by Skyler F 05 Nov '15

05 Nov '15

== QST QST QST == I will be doing an AllStar link demonstration at the 285 tech-connect radio club Saturday November 7th from 11:30 to 12:30 Mountain Daylight Time. This will be 10:30-11:30 Wast Coast time 1:30-2:30PM East Coast time Anybody with an AllStar Link node, please say hi, and link into node *41694* THIS NODE WILL SERVE AS THE HUB, and I will be coming in through another node where the Internet bandwidth is more limited. 73 Skyler KD0WHB

1 0

List Privacy
by mike＠midnighteng.com 05 Nov '15

05 Nov '15

I will protest this one time only ... The only reason I use this list is security and privacy a text based email reflector provides a good level of protection and is why I do not use other social media and yahoo groups etc. Now even if you do, you should respect my wishes and honer my privacy. Those of you who share my and others contact info "by sharing your address book" with these social services are violating a personal trust. You are actually signing your friends up for things without asking. Please, don't do this. I AM SURE You will just hate it when I share yours with a few you will not like. Those of you who use LINKEDIN and the like and give away the email addresses of all those that converse "directly" with you have been striking a very sore nerve with me for some time. I will no longer converse direct with anyone on a individual bases because of that. Group email only. I will no longer reply to those that have done this in the past "at all". Anyone sharing my email in the future will get their email shared as well and then you can enjoy that the same as I do. ...mike/kb8jnm

1 0

CIV Control for Kenwood TS-2000
by Randall Wright 04 Nov '15

04 Nov '15

Has anyone had any experience with CIV control for the Kenwood TS2000? Any info would be appreciated. Thanks and 73’s. Randall Wright KM4LKU

1 0