April 2015 - App_rpt-users - lists.keekles.org

BBB or Pi2
by Steve Zingman 21 Apr '15

21 Apr '15

Vince, I don't have a image, but if you want to build it yourself, See <https://github.com/N4IRS/AllStar> The tarball for the RPi2 is at <https://github.com/N4IRS/AllStar/raw/master/rpi2.tar> 73, Steve N4IRS > Hello all where can I get a pi2 and BBB Allstar OS image I want to > move my nodes to Pi or BBB. Thank You. > Vince -- "Anything is possible if you don't know what you are talking about." 1st Law of Logic

1 0

Baofeng UV-6 as a node radio
by (KP4TR)Ramon Gonzalez 21 Apr '15

21 Apr '15

Hello, Below is a link to an article I put together on using the Baofeng UV-6 as a node radio. The UV-6 is a dual band 2m/70cm radio that I've been using on Allstar for the past month and works very well. http://bit.ly/1G1KV2I

1 0

BBB or Pi2
by Steve Zingman 20 Apr '15

20 Apr '15

I have a Pi2 running DSP on a repeater just fine. Running Debian Jessie. 73, Steve N4IRS On 4/20/2015 12:00 PM, app_rpt-users-request(a)ohnosec.org wrote: > Message: 1 > Date: Mon, 20 Apr 2015 07:39:35 -0400 > From: Fred Moore<fred(a)fmeco.com> > To:app_rpt-users@ohnosec.org > Subject: [App_rpt-users] BBB or Pi2 > Message-ID:<5534E577.6040005(a)fmeco.com> > Content-Type: text/plain; charset="utf-8" > > Future development.. > Which one will have more development? > Does either one have enough power to process DSP? > > I know there are more Pi users out there than BB, at this point I can go > either way.. Thoughts.. Fred > > > -- Fred Moore -- "Anything is possible if you don't know what you are talking about." 1st Law of Logic

1 0

Re: [App_rpt-users] question
by jimmy keffer 19 Apr '15

19 Apr '15

i'm just staring in allstar is echolink support done with Conferences or something else jimmy

3 2

question
by jimmy keffer 18 Apr '15

18 Apr '15

read this on another list will allstar echolink support stop working on may 15th also? jimmy ka3vgm

1 0

Re: [App_rpt-users] Multiple PLs
by Robert Newberry 17 Apr '15

17 Apr '15

Thank for the help everyone. KB8JNM sent me a copy of his usbradio.conf. My problem was I was only putting a second RX tone and nothing for a for a TX tone. Once I defined a PL on TX and TX everything works. I am trying to accommodate a user with old Motorola maratracs and X9000. My repeater came from two states away and I changed the PL. So to be able to bring him in I resurrected the old PL so he can play too. N1XBM Apparare Scientor Paratus Communicare Allstar Node # 27086, 41540, 41812

1 0

Building Asterisk/chan_usbradio/App_rpt for Ubuntu 14.04
by Mike Tubby 17 Apr '15

17 Apr '15

All, I've just purchased a couple of DMK Engineering URI units and wanted to use them to hook up radios at my station for remote control. I am somewhat disappointed to find that chan_usbradio and App_rpt seems to have been pruned from the current Asterisk trunk - apparently because nobody maintained it in 3+ years ...? I have an Ubuntu 14.04 64-bit server in the shack and has expected to just: apt-get install asterisk apt-get install asterisk-app_rpt or some such similar commands but to no avail. Ok, I think - I'll go and grab some source and build it ... I started with Asterisk-1.6.2.24 believing that to be old enough ... Asterisk's "make menuselect" has App_rpt listed but with unsatisfied dependencies - likewise chan_usbradio. I've spent half-an-hour googling and I seem to be able to find complete Centos based distros, but I don't seem to be able to find any concise information on where to get a source tree that I can use for Asterisk/chan_usbradio/App_rpt ... there just seem to be half-built or half-out-of-date websites out there ... Can anyone point me in the right direction? Mike G8TIC

4 3

Multiple PLs
by Robert Newberry 16 Apr '15

16 Apr '15

Can anyone show me a copy of their usbradio.conf if your running more than one PL. I searched the archives and people mention doing it. I've tried separating by a comma with a space and no space. I still can not get my repeater to decode two different PLs. Anyone here decoding two PL have any advice? N1XBM Apparare Scientor Paratus Communicare Allstar Node # 27086, 41540, 41812

1 0

Re loading Linux
by mike.lussier＠gmail.com 16 Apr '15

16 Apr '15

I run the BBB package and access it remotely. That isn't too often. Mike AE4ML Sent from my iPhone

1 0

Beagle Board Starter Kit
by R. Wayne 16 Apr '15

16 Apr '15

I hope that I am not breaking a rule but I’ve come across what I think is a good deal on a complete starter kit with the Beagle Board. I buy regularly from MCI. http://tinyurl.com/qyylxm7 R. Wayne

1 0