June 2015 - App_rpt-users - lists.keekles.org

XIPAR Simple Voter
by Jeff Ackerman 23 Jun '15

23 Jun '15

Does anybody have any audio files of the output of there repeater running xipar simple voter voting receivers? I want to hear how noticeable the switch is between the receivers, if its even noticeable? Thanks, -- Jeff Ackerman kg6uyz(a)gmail.com

1 0

autopatch
by KD8USF 23 Jun '15

23 Jun '15

I have the autopatch setup, and I can dial out and that works fine. Problem is, the link between the repeater and asterisk is a simplex link. VOX is supposedly supported but it doesn't seem to work, it keeps the TX keyed even when there is no audio being passed over the phone. I have duplex=0 set in rpt.conf. Anyone have any suggestions on this.Andrew.

1 0

Asterisk froze?
by David Andrzejewski 22 Jun '15

22 Jun '15

I had an interesting thing happen. Asterisk froze. I was able to connect to the console with asterisk -r, but the repeater was completely stuck and unresponsive. I had to kill -9 the process and start it again. I didn't see anything in the logs. What kind of logging could I enable that would help me diagnose this issue if it happens again? -- David Andrzejewski E-mail david(a)davidandrzejewski.com iMessage david(a)davidandrzejewski.com Jabber/XMPP david(a)davidandrzejewski.com

1 0

ok i did some research..
by Loren Tedford 22 Jun '15

22 Jun '15

Hey everyone I spent most of yesterday researching this DTMF issues aparently the usbradio_29925.conf file got messed up or some thing because the audio in it is very very very hot so.. I dropped down the TX voice levels actually just about all the voice levels and now my home radios DTMF works but on my handheld only a few DTMF keys do not work and that is 9 6 3 2 The rest of the DTMF keys work great and it seems to be ok guessing in this case it could be my handheld.. I did notice however when i typed in the dtmf keys it did not recognize that there was no DTMF muting the dtmf tones just came across the repeater output into the datacenter so that in my opinion is very interesting.. audio file.. http://hub.kc9zhv.com/audio/41715/20150622055931.WAV [Jun 22 03:56:58] NOTICE[2667]: chan_usbradio.c:3064 usbradio_read: Got DTMF char * duration 127 ms -- Hungup 'Zap/pseudo-1709232097' [Jun 22 03:57:07] NOTICE[2667]: chan_usbradio.c:3064 usbradio_read: Got DTMF char 8 duration 106 ms [Jun 22 03:57:10] NOTICE[2667]: chan_usbradio.c:3064 usbradio_read: Got DTMF char 7 duration 127 ms [Jun 22 03:57:12] NOTICE[2667]: chan_usbradio.c:3064 usbradio_read: Got DTMF char 5 duration 42 ms [Jun 22 03:57:12] NOTICE[2667]: chan_usbradio.c:3064 usbradio_read: Got DTMF char 5 duration 21 ms [Jun 22 03:57:18] NOTICE[2667]: chan_usbradio.c:3064 usbradio_read: Got DTMF char 1 duration 23 ms [Jun 22 03:57:19] NOTICE[2667]: chan_usbradio.c:3064 usbradio_read: Got DTMF char 4 duration 212 ms [Jun 22 03:57:21] NOTICE[2667]: chan_usbradio.c:3064 usbradio_read: Got DTMF char 7 duration 169 ms Loren Tedford (KC9ZHV) Email: lorentedford(a)gmail.com Phone: ###-###-#### http://www.lorentedford.com http://www.kc9zhv.com http://hub.kc9zhv.com

1 0

dtmf issues now..
by Loren Tedford 22 Jun '15

22 Jun '15

Hey everyone im out running around on my hand held here below the repeater and magically i dont have the abulity to use my dtmf on the radio it only catches certain numbers not sure why anyone ever see anything like this.. [Jun 21 17:59:59] NOTICE[7212]: chan_usbradio.c:3064 usbradio_read: Got DTMF char * duration 170 ms [Jun 21 18:00:00] NOTICE[7212]: chan_usbradio.c:3064 usbradio_read: Got DTMF char 8 duration 169 ms -- Hungup 'Zap/pseudo-89928263' [Jun 21 18:00:05] NOTICE[7212]: chan_usbradio.c:3064 usbradio_read: Got DTMF char * duration 191 ms [Jun 21 18:00:05] NOTICE[7212]: chan_usbradio.c:3064 usbradio_read: Got DTMF char 8 duration 213 ms -- Hungup 'Zap/pseudo-178467920' -- Hungup 'Zap/pseudo-1233242443' Loren Tedford (KC9ZHV) Email: lorentedford(a)gmail.com Phone: 618-553-0806 http://www.lorentedford.com http://www.kc9zhv.com http://hub.kc9zhv.com

2 2

Re: [App_rpt-users] Some questions
by Tony 22 Jun '15

22 Jun '15

thanks for the reply. i will play with the enc settings hopefully it will do what I want. as for the CT, I ain't much of a coder, I do wish the docs were a bit better wrote cause to a dumbdumb like me it don't explain everything well. I ain't sure how I would define things. (it is abit above me pay grade lol) truth be told, I am totally lost on how to make it happen. On Sat, 20 Jun 2015 23:27:56 -0400 mike(a)midnighteng.com wrote: > > Sorry I don't have time to better answer more... > > usbradio.conf > txtoctype=no ; Transmit tone control type: no,phase,notone > ; no - CTCSS tone encoding with no hang time > ; phase - encode CTCSS and reverse phase > ; AKA ("reverse burst") before unkeying TX > ; notone - encode CTCSS and stop sending tone before > unkeying TX ; AKA ("chicken burst") > > You may be able to customize CT useing "ON EVENT" programming. > Get info on drupal site. Write your own code/scheme. > > ...mike/kb8jnm > > > > Ordered the DMK URI (expected delivery MONDAY!) I think I got the > > grasp of most of the stuff. But my 2 questions > > > > 1st. CT (courtesy tones) I want CT to reflect where the signal came > > from. however I don't want them changing due to link state. > > > > ie RF is ALWAYS my nextel chirp. anything coming in from echolink is > > always my dit dit. and say anything coming in from an allstar > > connection would have say a 3tone up. > > > > anyway to define this? all I can find is about the ct changing > > depending on link state. > > > > 2nd. transmitted ctcss, I have a tone enc in the GE. however my enc > > drops after the ct, and the rest of the tx hang is non-pl'ed > > > > (cor drops -> 500ms to ct -> 250ms TX CTCSS drops -> 2500ms ptt > > drops) > > > > Is there any way to set this to where I can define when enc drops? > > Id like to use a pin on the URI so I can use my internal encoder. > > > > thanks. > > _______________________________________________ > > App_rpt-users mailing list > > App_rpt-users(a)ohnosec.org > > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > > > To unsubscribe from this list please visit > > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and > > scroll down to the bottom of the page. Enter your email address and > > press the "Unsubscribe or edit options button" > > You do not need a password to unsubscribe, you can do it via email > > confirmation. If you have trouble unsubscribing, please send a > > message to the list detailing the problem. > > > >

1 0

Codecs
by Loren Tedford 21 Jun '15

21 Jun '15

Question what is the lowest codec one should use for allstar? If some one could list all the codecs and how they work in iax.conf or sip.conf that would be great example lets say i wish to use speex narrow band what would that be allow=Speex?? I tried it didnt work anythoughts suggestions by the way my repeater site has free internet but the internet can be really awful at times thats why i am looking for lower codecs to use.. here is some thing i found off the internet its a picture of different codecs but not sure exactly how i would tell the config file to use them or if i have to do anything special to use the codec.. http://i.stack.imgur.com/E93uL.png Loren Tedford (KC9ZHV) Email: lorentedford(a)gmail.com Phone: 618-553-0806 http://www.lorentedford.com http://www.kc9zhv.com http://hub.kc9zhv.com

3 2

I really miss the autopatch service
by Loren Tedford 21 Jun '15

21 Jun '15

Hey everyone really missing the autopatch service that use to work was wondering what everyone else is doing for autopatch I have been thinking about switching over to my wireless verizon carrier for autopatch but didnt know how to setup a regular rj11 connection between the repeater and the service any thoughts on the equipment needed please let me know here is the specific product i have in mind for accomplishing this goal.. http://www.verizonwireless.com/home-office-solutions/4g-lte-broadband-route… Loren Tedford (KC9ZHV) Email: lorentedford(a)gmail.com Phone: 618-553-0806 http://www.lorentedford.com http://www.kc9zhv.com http://hub.kc9zhv.com

4 3

Wiring a GM300 to a RTCM
by R. Wayne 21 Jun '15

21 Jun '15

I’ll confess that I am new to this part. It was dumped on me without warning and that’s OK. Time to learn a few things. I have a GM300 that is going to be a remote base and a cable purchased from eBay that is prewired for the GM300 side. I understand (I think) that TX goes RX, RX goes to TX, GRND to GRND – but now for PTT, COR and CTCSS. I wonder if some could push me over a cliff – I mean in the right direction. I have no documentation on the RTCM. Thanks, R. Wayne The RTCM connections are: DB9-Female 1 Vin (12v) 2 TX Audio 3 RX Audio 4 CTCSS 5 GND 6 GND 7 PTT 8 GND 9 GND The GM300 cable (and radio) connections are: Pin # 2 MIC BLU 3 PTT WHI-BLU 4 PROGRAMMABLE OUTPUT BRO 5 FLAT TX AUDIO GRN 7 GROUND WHI-GRN 8 PROGRAMMABLE I/O (COR ?)ONG 11 RECEIVE AUDIO WHI-ONG 14 PROGRAMMABLE I/O WHI-BRO 15-16 Jumpered to enable internal speaker

2 5

Rasberry PI 2 and RTCM
by Fran 20 Jun '15

20 Jun '15

Hello I am trying to link an RTCM to a Rasberry PI 2 system, any definite configurations would be appreciated..... Thanks

2 1