June 2015 - App_rpt-users - lists.keekles.org

cannot transmit using USBFob Acid App Rpt using Asterisk
by Ivan Eka Aditya 08 Jun '15

08 Jun '15

hallo everybody, I wanna ask, about using roip using app rpt astering... I can receive, but I cannot transmit using usbfob to radio... I use HT Alinco... what shoul I do? help please... -

1 0

Re: [App_rpt-users] Allstar shows on web trasnceiver but cannot connect
by R. Wayne 08 Jun '15

08 Jun '15

Thank you for your help. I sure appreciate all of you. Really. All that we did was change the location of the server. The ISP changed as a result. I had a lengthy conversation with Justin over the air. At first he heard me connect but we couldn’t hear him. But then he suddenly came through. He had packet loss / jitter some of the time but that may have been because the location that our remote base is at uses a wireless router and xBox for entertainment :-) At no time could we connect via the web transceiver. It was suggested that if I suspect that a port is blocked, which Charter Internet tells me, "Sir, no ports are blocked. But if a port is blocked it is for security reasons and we are not going to unblock it for you." Hmm... OK. So is the port blocked or not? LOL. This server worked fine on AT&T where it sat behind a router. DHCP was used and it was connected via a wireless adapter and it worked fine. Now that it has been moved here the ONLY thing changed was ifcfg-eth0 and the IP and gateway information, and resolv.conf to put in my nameservers. It now has a static IP, no firewall. The allstar address for status updates do resolve. iptables is empty but I was asked to turn it off. I did with no change. It has been suggested that if I feel that a port is blocked I changed 4569 to 4570 at allstarlink.org and in iax.conf. I don't see anywhere on the web site where I change 4569 to 4570. [harumph] R. Wayne

2 2

Allstar shows on web trasnceiver but cannot connect
by R. Wayne 07 Jun '15

07 Jun '15

New to Allstar but have been running fine for several months. Allstar shows on web transceiver but we cannot connect. No ports are closed on our server but when I test ports 4569 and 5060 on allstarlink.org they show as closed. We appear however on the list of nodes – me just cannot connect. Our RTCM shows traffic. top –c shows /usr/sbin/asterisk -f -vvvg -c running just fine. What are we missing? Thank you in advance.

1 0

Non-DSP operation
by Steve Zingman 07 Jun '15

07 Jun '15

Lu, It's not quite what you asked for, but I have a pretty well commented usbradio.conf on <https://github.com/N4IRS/AllStar/blob/master/configs/usbradio.conf> On comment, even though you are going to use just CTCSS decode, you want to assert COS. Even if it is all the time. try setting carrierfrom to usbinvert and pull the COS pin on the URI low. Set ctcssfrom to USB for a active high signal from your CTCSS decoder. 73, Steve N4IRS On 06/07/2015 03:44 PM, app_rpt-users-request(a)ohnosec.org wrote: > Message: 2 > Date: Sun, 7 Jun 2015 14:05:30 -0400 > From: Lu Vencl<luvencl8(a)gmail.com> > To: app_rpt mailing list<app_rpt-users(a)ohnosec.org> > Subject: [App_rpt-users] Non-DSP operation > Message-ID:<8D5072B9-F1E3-477C-826F-81B7F6F05483(a)gmail.com> > Content-Type: text/plain; charset=us-ascii > > Can somebody send me an example USB file on how you should configure a no that is not running off solely the discriminator processing? I am running discriminator but I am trying to use CTCSS off my repeater. It is tied to pin number seven on the URI, however no matter if I use USB or USB invert I can't seem to get the signaling straightened out. My repeater sends out 12v when CTCSS is detected. I have cor set to no. > Anyone have any ideas or can provide a sample for me please? > > Lu Vencl

1 0

Non-DSP operation
by Lu Vencl 07 Jun '15

07 Jun '15

Can somebody send me an example USB file on how you should configure a no that is not running off solely the discriminator processing? I am running discriminator but I am trying to use CTCSS off my repeater. It is tied to pin number seven on the URI, however no matter if I use USB or USB invert I can't seem to get the signaling straightened out. My repeater sends out 12v when CTCSS is detected. I have cor set to no. Anyone have any ideas or can provide a sample for me please? Lu Vencl

2 2

Changing the echolink prefix digit
by KD8USF 07 Jun '15

07 Jun '15

How can I change the echolink prefix digit 3 to something else? Is there a config option for this? Andrew.

2 1

Initial ID script
by mike＠midnighteng.com 05 Jun '15

05 Jun '15

For those wanting the intial id script as a file, it is posted at: http://themidnightengineer.com/category/ham-amateur-radio/app_rpt/scripts/i… See "download as a file" link at the bottom of instructions. ...mike/kb8jnm

1 0

help RTCM
by Tammy 05 Jun '15

05 Jun '15

I have 6 rtcm setup along with a URI right now everything works great until my ISP goes down or reboot my router where (not modem) my server is located at. then the RTCM will not work until I reboot the RTCM or the routers that they are located at I was wondering if any one can help to see what I have done that would be causing this issue. I don't have a static IP but using DYN server to correct the ip when it changes. everything works fine if I reboot the routers where the RTCM are located or reboot each of the RTCM any one else have this problem and is there a cure.

3 2

Re: [App_rpt-users] Can't connect in or out
by Skyler F 04 Jun '15

04 Jun '15

Ok I just ran the node setup script and I think that problem is fixed now.

1 0

Echolink Driver Question
by Jamey Wright 04 Jun '15

04 Jun '15

I have the Echolink Driver installed, configured, and working. When I go to the Echolink website to verify, I can find it on this page http://echolink.org/logins.jsp but not on this page http://echolink.org/links.jsp?title=&d=2&sel=all&lat_fix=&lon_fix=&lat_deg=… Is this an error in my echolin.conf file or is it an issue on Echolink's side? Thanks Jamey WR4JW

2 1