January 2017 - App_rpt-users - lists.keekles.org

test
by Steve Zingman 25 Jan '17

25 Jan '17

Please ignore -- "Just say no to world domination"

1 0

crontab schedule repeater announcements
by DuaneVT . 25 Jan '17

25 Jan '17

I am having trouble getting crontab to schedule playing repeater announcements. I have successfully recorded IAX speech to "prompt01.gsm". I created a script /etc/asterisk/scripts/announcements01.sh. #!/bin/bash # Script plays prompt01 audio files over local node (repeater) PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin /usr/sbin/asterisk -rx "rpt localplay 42996 /etc/asterisk/scripts/prompt01" Via terminal, I can enter "announcements01" and hear the node play the repeater announcements. My crontab -e is: SHELL=/bin/bash PATH=~/sbin:/bin:/usr/sbin:/usr/bin:/etc/asterisk/scripts MAILTO=root HOME=/ # I have tried all the following script treatments! # m h dom mon dow command * * * * * ./announcements01 * * * * * ./announcements01.sh * * * * * . /announcements01.sh # dot space announcements01.sh * * * * * announcements01.sh # chmod u-x announcements01.sh (to make executable) ------------------------------------------------------------------------------------------------------------------- I have used the crontab to pass text to a file every minute..no problems; so cron is running. I am logged into ROOT. Any suggestions as to HOW to get crontab to run my announcements01.sh script would be MUCH appreciated! 73, Duane KA1LM

2 1

Test
by Steve Zingman 25 Jan '17

25 Jan '17

Please ignore -- "Real programmers us vi, that's why I use nano"

1 0

test
by Steve Zingman 25 Jan '17

25 Jan '17

Please ignore -- "Real programmers us vi, that's why I use nano"

1 0

testing ohnosec
by Bryan Fields 25 Jan '17

25 Jan '17

ignore please -- Bryan Fields 727-409-1194 - Voice http://bryanfields.net

1 0

testing
by Bryan Fields 24 Jan '17

24 Jan '17

please ignore -- Bryan Fields 727-409-1194 - Voice http://bryanfields.net

1 0

DIAL adding a user
by Robert Newberry 24 Jan '17

24 Jan '17

I am adding adding a user login to my system. When I ssh in my prompt is "$" I am not used to seeing this from working with other distributions. Is this correct? When I type su to change to root, I get this root@repeater:/home/user# I feel like I've done something wrong here. -- N1XBM Apparare Scientor Paratus Communicare Allstar Node # 27086, 41540, 41812, 42086, 42658, 42657 www.radioguysrepeaternetwork.com

2 1

Bind echolink channel driver to 2 nodes?
by KM6HK 24 Jan '17

24 Jan '17

I just enabled a private node on my CentOS install. The main public node #41477 is currently bound to the echolink channel driver. How do I also concurrently bind it to the other private node #1477 as well as 41477? The entry in the echolink.conf file is: astnode=41477 can one do astnode=41477,1477 ;or some such kludge? Any Help appreciated. -KM6HK

3 3

DMK-URI
by Bruce B Isaacson 23 Jan '17

23 Jan '17

Hello, I am having trouble receiving audio into Allstar. I can hear audio from Allstar. Tested audio on pins 21 and 20 on the connector going into the URI and audio is coming in perfectly. That leaves me with the problem of getting the audio through the DMK Uri to the computer and on to Allstar. Made up a loop back cable for the Uri and received the following and not sure what to think about the results I received. To me it appears that the audio is in the tank and not working but I am not sure of all the other results. Any input will be appreciated from anyone having had to do the same test. Upon opening the Uri I get the following: Found CM119 USB Radio Interface at 002/003 (This is the bus and port the Uri appears on} Unable to re-open DSP device 1: /dev/dsp1 The Left Channel Test and Right Channel test are all like what is shown below only with differing frequencies. Level at 1004.0 Hz: 0.0 mV (RMS) 0.0 mV (P-P) Level at 204.0 Hz: 0.0 mV (RMS) 0.0 mV (P-P) (Same results for test for test 3 to 99) Test T Enter your selection: T Testing digital I/O (PTT,COR,TONE and GPIO).... Digital I/O passed!! Testing Analog at 204 (and 700) Hz... Analog level on left channel for 204.0 Hz (0.0) is out of range!! Must be between 440.0 and 660.0 Analog level on right channel for 700.0 Hz (0.0) is out of range!! Must be between 440.0 and 660.0 Testing Analog at 504 (and 700) Hz... Analog level on left channel for 504.0 Hz (0.0) is out of range!! Must be between 440.0 and 660.0 Analog level on right channel for 700.0 Hz (0.0) is out of range!! Must be between 440.0 and 660.0 Testing Analog at 1004 (and 700) Hz... Analog level on left channel for 1004.0 Hz (0.0) is out of range!! Must be between 440.0 and 660.0 Analog level on right channel for 700.0 Hz (0.0) is out of range!! Must be between 440.0 and 660.0 Testing Analog at 2004 (and 700) Hz... Analog level on left channel for 2004.0 Hz (0.0) is out of range!! Must be between 440.0 and 660.0 Analog level on right channel for 700.0 Hz (0.0) is out of range!! Must be between 440.0 and 660.0 Testing Analog at 3004 (and 700) Hz... Analog level on left channel for 3004.0 Hz (0.0) is out of range!! Must be between 440.0 and 660.0 Analog level on right channel for 700.0 Hz (0.0) is out of range!! Must be between 440.0 and 660.0 Testing Analog at 5004 (and 700) Hz... Analog level on left channel for 5004.0 Hz (0.0) is out of range!! Must be between 93.6 and 140.4 Analog level on right channel for 700.0 Hz (0.0) is out of range!! Must be between 440.0 and 660.0 Testing Analog at 700 (and 204) Hz... Analog level on left channel for 700.0 Hz (0.0) is out of range!! Must be between 440.0 and 660.0 Analog level on right channel for 204.0 Hz (0.0) is out of range!! Must be between 440.0 and 660.0 Testing Analog at 700 (and 504) Hz... Analog level on left channel for 700.0 Hz (0.0) is out of range!! Must be between 440.0 and 660.0 Analog level on right channel for 504.0 Hz (0.0) is out of range!! Must be between 440.0 and 660.0 Testing Analog at 700 (and 1004) Hz... Test i Enter your selection:i Testing digital I/O (PTT,COR,TONE and GPIO).... Digital I/O passed!! Thank you for your time! Very much appreciated.

2 1

proxy server
by Robert Newberry 23 Jan '17

23 Jan '17

I built up a portable node. I came across this webpage https://allstarlink.org/proxy.html. I thought about making the server my node at a site with a direct fiber connection. Its good solid, stable internet. This seems like a good way to use resources I already have available to be able to use my portable node on the road. Has anyone done this before? Are the instructions good, or anything you would do differently? -- N1XBM Apparare Scientor Paratus Communicare Allstar Node # 27086, 41540, 41812, 42086, 42658, 42657 www.radioguysrepeaternetwork.com

3 4