June 2018 - App_rpt-users - lists.keekles.org

URI GPIO
by Scott Weis 04 Jun '18

04 Jun '18

I'm trying to set up channel steering for a Motorola CDM1250 and have the radio working without a URI. If I ground the channel pins the channels change on the radio fine. Now when I connect the pins to a URI-x gpio1 gpio2 gpio5 and gpio6 It dosent seem to work. I have gpio1=out0 , gpio2=out0, gpio5=out0, gpio6=out0 and when I do a *584=cop,61,GPIO5=1 or *585=cop,61,GPIO5=0 nothing seems to change on the URI, either state I see +5v on the URI. Should it not get pulled to ground? Am I doing something wrong? Thanks & 73 de Scott KB2EAR

4 6

Re: [App_rpt-users] RTCM [RX Packet Out of Bounds] ***Updated***
by Hayden Honeywood 04 Jun '18

04 Jun '18

Hi Kevin, Sorry keep getting confused... the VOTER (thru-hole) board lets you do a Diode calibration. I think the RTCM has the same functionality... it's documented in the manual, but not detailed. It has the switch for it anyway... OK on the baud rate and the messages you have in debug. I'm pretty sure the time on the RTCM's references the master timing source - which has the app_rpt host connected on the same network. Have you checked that your host has the correct time. The only time I saw the GPS Data Time period elasped error was running 4800 baud on the Garmin puck receivers. I changed this to 9600 which fixed the issue. Hayden

1 0

Announcement - Board of Directors - AllStarLink, Inc.
by Kevin Custer 03 Jun '18

03 Jun '18

On behalf of AllStarLink, Inc., we're pleased to announce the addition of Pete Elke WI6H to the Board of Directors. Pete's a long time user of the AllStar technology, and a fellow repeater builder. He worked with Jim Dixon on many occasions both inside and outside of Asterisk and app_rpt. Pete brings many organizational qualities to our group, and with his help we'll continue to evolve this project, keeping in mind the vision and goals of our late founder. For AllStarLink, Inc. Kevin W3KKC

1 0

Send text Commands to Echolink
by Jeffrey Lehman, KC8QCH 02 Jun '18

02 Jun '18

HI all, This may have been asked before and may be a silly question, but is it possible to send text commands to Echolink? I have an Allstar Node that connects to an Echolink conference fulltime. Is there a way to send conference command to the conference from the allstar node? Or am I just dreaming which is possible too. thanks :) Jeff -- Jeff Lehman, KC8QCH https://kc8qch.ddns.net kc8qch(a)gmail.com Webmaster Hamilton County ARPSC https://www.hamcoarpsc.org hamcoarpsc(a)gmail.com AllStar 47374 Node Administrator World Wide Amateur Radio Guild https://theguildglobal.org

2 1

Nodes update & Firewall ports
by Mike 02 Jun '18

02 Jun '18

I have a vps hub that stopped getting node list info after installing a firewall. Everything else seems ok... Could it be that I have missed a necessary port for the retrieval ? Not sure where that it running from to look. ...mike/kb8jnm

2 2

usbradio.conf rxdemod
by Bob Pyke 01 Jun '18

01 Jun '18

When I set usbradio.conf rxdemod=flat ; the audio out of the repeater sounds muffled compared to the audio while listening to the repeater input with a monitoring radio. When rxdemod=speaker ; the audio out of the repeater sounds tinny compared to the audio input to the repeater. Is there a way to “select” something in between in software? Thanks, Bob K6ECM 73

2 5

Router Malware Warnings from FBI
by Mike 01 Jun '18

01 Jun '18

Just in the case you have not heard the news of the past week, There is a warning issued by the FBI about a potential malware threat to routers. https://www.washingtonpost.com/news/powerpost/paloma/the-cybersecurity-202/… While I did try to dig deeper on this over the weekend, I could not obtain the grimy details. But it looks like a sleeper so you might want to do due diligence and reset your router to clear the ram. When I say sleeper, I mean it has yet to perform new duties so it might not affect anything now. I'm clearing all of mine once a day till I find out more. Just a FYI. ...mike/kb8jnm

4 6

SimpleUSB
by Mike 01 Jun '18

01 Jun '18

Can someone send me a copy of their modules.conf and SimpleUSB.conf/RadioUSB (off list) that is using only SimpleUSB or RadioUSB AND a Parallel port for i/o I guessing I'm missing something for the pport in modules.conf. As I try to transition/convert to a deb9 and new ASL from ACID, and to get back into the practice with scripting, I'm having issues with a 'headed system' using parallel port. My old config's don't work at all. So I'm missing something. Perhaps something new ? ...mike/kb8jnm

1 1

Re: [App_rpt-users] My role with AllStarLink
by Tom 01 Jun '18

01 Jun '18

Steve, Thank you for all that you do and have done. I know you will continue to contribute. Best - Tom / K5TRA -----Original Message----- From: App_rpt-users [mailto:app_rpt-users-bounces@lists.allstarlink.org] On Behalf Of app_rpt-users-request(a)lists.allstarlink.org Sent: Thursday, May 31, 2018 11:00 AM To: app_rpt-users(a)lists.allstarlink.org Subject: App_rpt-users Digest, Vol 111, Issue 27 Send App_rpt-users mailing list submissions to app_rpt-users(a)lists.allstarlink.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users or, via email, send a message with subject or body 'help' to app_rpt-users-request(a)lists.allstarlink.org You can reach the person managing the list at app_rpt-users-owner(a)lists.allstarlink.org When replying, please edit your Subject line so it is more specific than "Re: Contents of App_rpt-users digest..." This site is dedicated to the memory of Jim Dixon WB6NIL Today's Topics: 1. Re: RTCM [RX Packet Out of Bounds] ***Updated*** (Hayden Honeywood) 2. Re: RTCM [RX Packet Out of Bounds] ***Updated*** (Kevin Babich) 3. Re: RTCM [RX Packet Out of Bounds] ***Updated*** (Kevin Babich) 4. Android IAXRPT (Steve Zingman) 5. My role with AllStarLink (Steve Zingman) 6. Re: Android IAXRPT (Mike) 7. Re: My role with AllStarLink (Angelo T Sonnesso) 8. Re: Android IAXRPT (Steve Zingman) 9. Re: My role with AllStarLink (Bryan D. Boyle) 10. Router Malware Warnings from FBI (Mike) 11. Re: My role with AllStarLink (Steven Blackford) ---------------------------------------------------------------------- Message: 1 Date: Thu, 31 May 2018 08:34:11 +1000 From: Hayden Honeywood <haydenph91(a)gmail.com> To: app_rpt-users(a)lists.allstarlink.org Subject: Re: [App_rpt-users] RTCM [RX Packet Out of Bounds] ***Updated*** Message-ID: <CAC0VLD30aVxNbz01WiEw1bvjCKxCc_eo3Vkc=fR-M8CRTauaWg(a)mail.gmail.com> Content-Type: text/plain; charset="utf-8" What is your values in voter.conf for RX buffer and in the RTCM client for TX buffer. Are all RTCM TX buffers set to the same value? Are all the GPS's in a location where they cannot be swamped with RF? Some users have had success with a dedicated RTCM as the master timing source (with no radio connected). Regards Hayden VK7HH

1 0

Help with Searching Key-Words App_rpt-users Forum
by John W Benedict 01 Jun '18

01 Jun '18

Hello Group, I am new with the group and relatively new with Allstar as well. Is there a way to search this forum for information already discussed? Thank you John [ke5rs]

3 2