June 2018 - App_rpt-users - lists.keekles.org

Re: [App_rpt-users] iaxrpt
by mwbesemer＠cox.net 29 Jun '18

29 Jun '18

David, WRT your first statement, if I'm connecting via my Windows machine to my local IP, am I really exiting my LAN and coming back in? Or am I routing straight to the IP of my node. I have DD-WRT on my router have have the port forwarded. (I really expect my problem to be there - port forwarding has historically bit me in the butt.) BTW, my node is set for DHCP, but in the router, I have that MAC address assigned to a fixed IP address. I've tried using xxx.xxx.xxx.xxx:4569 and that doesn't help. I probably confused people by referencing the hamvoip document. I'm using ASL, but the hamvoip document was recommend to me as a guide to set up iaxrpt on my node. I'll try the traccert tonight when I get home. Many thanks, Mike WM4B On Fri, Jun 29, 2018 at 10:18 AM, David Shaw wrote: > Most new routers won't allow you to exit the local network (LAN) and > come > back in. This might happen if you use a domain name that is associated > with > your public address. If you want to use your public domain name to > access > your node from inside your LAN. You'll need to add a DNS entry to your > router. **See "Side Note" below > > By default IAX2 uses UDP port 4569 and the bind address is set to all > interfaces/addresses in the ASL OS (allstarlink.org) As for the > hamvoip.com > settings, you should check with them. > > Are you using the hostname or IP address to access your node? > Like Mike stated, use xxx.xxx.xxx.xxx:4569 from your local (LAN) > devices. > > Testing: > From your windows based computer. Try tracert and the IPaddress of the > node. > > tracert 192.168.x.x > > 1 <1 ms <1 ms <1 ms 192.168.x.x > > There should be only one hope to your node if your windows computer in > on > the same network. > > Side note: > I use dhcp on all my nodes on my LAN networks. I give them static > address > via the DHCP server. I also change the hostname on the node. i.e. > asl2060 > This allows the router's internal DNS server to associate the hostname > and > IP address for the ASL node. Some routers will allow you to add a > domain > name. > Also there is no need to open TCP port forwarding on you router for > IAX2 > 4569. > > David > > > > > -- > Thanks, David > > "Laws that forbid the carrying of arms...disarm only those who are > neither > inclined nor determined to commit crimes. Such laws make things worse > for > the assaulted and better for the assailants; they serve rather to > encourage > than prevent homicides, for an unarmed man may be attacked with > greater > confidence than an armed one." > Thomas Jefferson > > On Fri, Jun 29, 2018 at 3:58 AM, <mwbesemer(a)cox.net> wrote: > >> No. I've never seen reference to that. I'm still in the initial >> phase of >> setting up this node; have not messed with rpt.conf yet. >> >> Mike >> WM4B >> >> >> On Thu, Jun 28, 2018 at 11:11 PM, Bob Pyke wrote: >> >> Did you add your local node address for each node in the rpt,conf >> [nodes] >>> stanza? >>> Thanks, >>> Bob >>> K6ECM >>> 73 >>> >>> >>> On Jun 28, 2018, at 6:12 PM, Mike <mm(a)midnighteng.com> wrote: >>>> >>>> >>>> Mike, >>>> >>>> Still a lot of possibilities of things that may not be right but, >>>> >>>> Just so that you are conducting a 'good test' behind your nat >>>> through >>>> wifi, >>>> >>>> put your phone in airplane mode, then turn just the wifi on and >>>> connect. >>>> >>>> You might also want to turn the forwarding to just the UDP 4569 and >>>> specify that in your phone connect, >>>> >>>> guessing your using the android iaxrpt.... like this for your >>>> IP... >>>> >>>> 192.169.1.101:4569 < :port especially if not the norm, but do it >>>> anyway. >>>> That's a few things to investigate anyway, >>>> >>>> Let me know if your still having issues. >>>> >>>> Oh... don't forget to get back out of airplane mode / turn cellular >>>> back >>>> on when done. >>>> >>>> Hate to see ya late for dinner ...lol >>>> ...mike/kb8jnm >>>> >>>> On 6/28/2018 8:00 PM, Mike Besemer wrote: >>>>> Making progress on my node. After several false starts I finally >>>>> got >>>>> the node connected and am able to connect via iaxrpt from my >>>>> Android >>>>> devices if I use my EXTERNAL IP address. >>>>> >>>>> I cannot connect from Android or Windows using my INTERAL IP >>>>> address. I >>>>> followed the guide at hamvoip.com and have double checked >>>>> everything. >>>>> >>>>> The port is open for both UDP and TCP connections. The firewall >>>>> seems >>>>> ok. >>>>> >>>>> It has to be something obvious. What did I miss? >>>>> >>>>> Mike >>>>> >>>>> WM4B >>>>> >>>>> >>>>> >>>>> _______________________________________________ >>>>> App_rpt-users mailing list >>>>> App_rpt-users(a)lists.allstarlink.org >>>>> >>>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >>>>> >>>>> To unsubscribe from this list please visit >>>>> >>>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >>>>> and scroll down to the bottom of the page. Enter your email >>>>> address and >>>>> press the "Unsubscribe or edit options button" >>>>> You do not need a password to unsubscribe, you can do it via email >>>>> confirmation. If you have trouble unsubscribing, please send a >>>>> message to >>>>> the list detailing the problem. >>>>> >>>> >>>> _______________________________________________ >>>> App_rpt-users mailing list >>>> App_rpt-users(a)lists.allstarlink.org >>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >>>> >>>> To unsubscribe from this list please visit >>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >>>> and >>>> scroll down to the bottom of the page. Enter your email address and >>>> press >>>> the "Unsubscribe or edit options button" >>>> You do not need a password to unsubscribe, you can do it via email >>>> confirmation. If you have trouble unsubscribing, please send a >>>> message to >>>> the list detailing the problem. >>>> >>> >>> >>> ------------------------------ >>> >>> _______________________________________________ >>> App_rpt-users mailing list >>> App_rpt-users(a)lists.allstarlink.org >>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >>> >>> To unsubscribe from this list please visit >>> http://lists.allstarlink.org/c >>> gi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom >>> of >>> the page. Enter your email address and press the "Unsubscribe or >>> edit >>> options button" >>> You do not need a password to unsubscribe, you can do it via email >>> confirmation. If you have trouble unsubscribing, please send a >>> message to >>> the list detailing the problem. >>> >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users(a)lists.allstarlink.org >> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >> >> To unsubscribe from this list please visit >> http://lists.allstarlink.org/c >> gi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom >> of >> the page. Enter your email address and press the "Unsubscribe or edit >> options button" >> You do not need a password to unsubscribe, you can do it via email >> confirmation. If you have trouble unsubscribing, please send a >> message to >> the list detailing the problem. >> > > > ------------------------------ > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > and scroll down to the bottom of the page. Enter your email address > and press the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email > confirmation. If you have trouble unsubscribing, please send a message > to the list detailing the problem.

3 3

Re: [App_rpt-users] iaxrpt
by mwbesemer＠cox.net 29 Jun '18

29 Jun '18

I am. Mike On Fri, Jun 29, 2018 at 11:38 AM, Bob Pyke wrote: > Yes > Thanks, > Bob > K6ECM > 73 > > >> On Jun 29, 2018, at 8:10 AM, mwbesemer(a)cox.net wrote: >> >> Bob - do you mean the IP of the node itself? >> >> Mike >> >> >> >>> On Fri, Jun 29, 2018 at 11:01 AM, Bob Pyke wrote: >>> >>> If both devices are behind the router, the sub address needs to be >>> used for iaxrpt, not your public IP address. e.g. 192.168.0.5 >>> >>> Thanks, >>> Bob >>> K6ECM >>> 73 >>> >>> >>>> On Jun 29, 2018, at 7:49 AM, mwbesemer(a)cox.net wrote: >>>> >>>> David, >>>> >>>> WRT your first statement, if I'm connecting via my Windows machine >>>> to my local IP, am I really exiting my LAN and coming back in? Or >>>> am I routing straight to the IP of my node. I have DD-WRT on my >>>> router have have the port forwarded. (I really expect my problem >>>> to be there - port forwarding has historically bit me in the butt.) >>>> BTW, my node is set for DHCP, but in the router, I have that MAC >>>> address assigned to a fixed IP address. >>>> >>>> I've tried using xxx.xxx.xxx.xxx:4569 and that doesn't help. >>>> >>>> I probably confused people by referencing the hamvoip document. >>>> I'm using ASL, but the hamvoip document was recommend to me as a >>>> guide to set up iaxrpt on my node. >>>> >>>> I'll try the traccert tonight when I get home. >>>> >>>> Many thanks, >>>> >>>> Mike >>>> WM4B >>>> >>>>> On Fri, Jun 29, 2018 at 10:18 AM, David Shaw wrote: >>>>> >>>>> Most new routers won't allow you to exit the local network (LAN) >>>>> and come >>>>> back in. This might happen if you use a domain name that is >>>>> associated with >>>>> your public address. If you want to use your public domain name to >>>>> access >>>>> your node from inside your LAN. You'll need to add a DNS entry to >>>>> your >>>>> router. **See "Side Note" below >>>>> >>>>> By default IAX2 uses UDP port 4569 and the bind address is set to >>>>> all >>>>> interfaces/addresses in the ASL OS (allstarlink.org) As for the >>>>> hamvoip.com >>>>> settings, you should check with them. >>>>> >>>>> Are you using the hostname or IP address to access your node? >>>>> Like Mike stated, use xxx.xxx.xxx.xxx:4569 from your local (LAN) >>>>> devices. >>>>> >>>>> Testing: >>>>> From your windows based computer. Try tracert and the IPaddress of >>>>> the node. >>>>> >>>>> tracert 192.168.x.x >>>>> >>>>> 1 <1 ms <1 ms <1 ms 192.168.x.x >>>>> >>>>> There should be only one hope to your node if your windows >>>>> computer in on >>>>> the same network. >>>>> >>>>> Side note: >>>>> I use dhcp on all my nodes on my LAN networks. I give them static >>>>> address >>>>> via the DHCP server. I also change the hostname on the node. i.e. >>>>> asl2060 >>>>> This allows the router's internal DNS server to associate the >>>>> hostname and >>>>> IP address for the ASL node. Some routers will allow you to add a >>>>> domain >>>>> name. >>>>> Also there is no need to open TCP port forwarding on you router >>>>> for IAX2 >>>>> 4569. >>>>> >>>>> David >>>>> >>>>> >>>>> >>>>> >>>>> -- >>>>> Thanks, David >>>>> >>>>> "Laws that forbid the carrying of arms...disarm only those who are >>>>> neither >>>>> inclined nor determined to commit crimes. Such laws make things >>>>> worse for >>>>> the assaulted and better for the assailants; they serve rather to >>>>> encourage >>>>> than prevent homicides, for an unarmed man may be attacked with >>>>> greater >>>>> confidence than an armed one." >>>>> Thomas Jefferson >>>>> >>>>>> On Fri, Jun 29, 2018 at 3:58 AM, <mwbesemer(a)cox.net> wrote: >>>>>> >>>>>> No. I've never seen reference to that. I'm still in the initial >>>>>> phase of >>>>>> setting up this node; have not messed with rpt.conf yet. >>>>>> >>>>>> Mike >>>>>> WM4B >>>>>> >>>>>> >>>>>> On Thu, Jun 28, 2018 at 11:11 PM, Bob Pyke wrote: >>>>>> >>>>>> Did you add your local node address for each node in the rpt,conf >>>>>> [nodes] >>>>>>> stanza? >>>>>>> Thanks, >>>>>>> Bob >>>>>>> K6ECM >>>>>>> 73 >>>>>>> >>>>>>> >>>>>>>> On Jun 28, 2018, at 6:12 PM, Mike <mm(a)midnighteng.com> wrote: >>>>>>>> >>>>>>>> >>>>>>>> Mike, >>>>>>>> >>>>>>>> Still a lot of possibilities of things that may not be right >>>>>>>> but, >>>>>>>> >>>>>>>> Just so that you are conducting a 'good test' behind your nat >>>>>>>> through >>>>>>>> wifi, >>>>>>>> >>>>>>>> put your phone in airplane mode, then turn just the wifi on and >>>>>>>> connect. >>>>>>>> >>>>>>>> You might also want to turn the forwarding to just the UDP 4569 >>>>>>>> and >>>>>>>> specify that in your phone connect, >>>>>>>> >>>>>>>> guessing your using the android iaxrpt.... like this for your >>>>>>>> IP... >>>>>>>> >>>>>>>> 192.169.1.101:4569 < :port especially if not the norm, but do >>>>>>>> it >>>>>>>> anyway. >>>>>>>> That's a few things to investigate anyway, >>>>>>>> >>>>>>>> Let me know if your still having issues. >>>>>>>> >>>>>>>> Oh... don't forget to get back out of airplane mode / turn >>>>>>>> cellular back >>>>>>>> on when done. >>>>>>>> >>>>>>>> Hate to see ya late for dinner ...lol >>>>>>>> ...mike/kb8jnm >>>>>>>> >>>>>>>>> On 6/28/2018 8:00 PM, Mike Besemer wrote: >>>>>>>>> Making progress on my node. After several false starts I >>>>>>>>> finally got >>>>>>>>> the node connected and am able to connect via iaxrpt from my >>>>>>>>> Android >>>>>>>>> devices if I use my EXTERNAL IP address. >>>>>>>>> >>>>>>>>> I cannot connect from Android or Windows using my INTERAL IP >>>>>>>>> address. I >>>>>>>>> followed the guide at hamvoip.com and have double checked >>>>>>>>> everything. >>>>>>>>> >>>>>>>>> The port is open for both UDP and TCP connections. The >>>>>>>>> firewall seems >>>>>>>>> ok. >>>>>>>>> >>>>>>>>> It has to be something obvious. What did I miss? >>>>>>>>> >>>>>>>>> Mike >>>>>>>>> >>>>>>>>> WM4B >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> _______________________________________________ >>>>>>>>> App_rpt-users mailing list >>>>>>>>> App_rpt-users(a)lists.allstarlink.org >>>>>>>>> >>>>>>>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >>>>>>>>> >>>>>>>>> To unsubscribe from this list please visit >>>>>>>>> >>>>>>>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >>>>>>>>> and scroll down to the bottom of the page. Enter your email >>>>>>>>> address and >>>>>>>>> press the "Unsubscribe or edit options button" >>>>>>>>> You do not need a password to unsubscribe, you can do it via >>>>>>>>> email >>>>>>>>> confirmation. If you have trouble unsubscribing, please send a >>>>>>>>> message to >>>>>>>>> the list detailing the problem. >>>>>>>>> >>>>>>>> >>>>>>>> _______________________________________________ >>>>>>>> App_rpt-users mailing list >>>>>>>> App_rpt-users(a)lists.allstarlink.org >>>>>>>> >>>>>>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >>>>>>>> >>>>>>>> To unsubscribe from this list please visit >>>>>>>> >>>>>>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >>>>>>>> and >>>>>>>> scroll down to the bottom of the page. Enter your email address >>>>>>>> and press >>>>>>>> the "Unsubscribe or edit options button" >>>>>>>> You do not need a password to unsubscribe, you can do it via >>>>>>>> email >>>>>>>> confirmation. If you have trouble unsubscribing, please send a >>>>>>>> message to >>>>>>>> the list detailing the problem. >>>>>>>> >>>>>>> >>>>>>> >>>>>>> ------------------------------ >>>>>>> >>>>>>> _______________________________________________ >>>>>>> App_rpt-users mailing list >>>>>>> App_rpt-users(a)lists.allstarlink.org >>>>>>> >>>>>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >>>>>>> >>>>>>> To unsubscribe from this list please visit >>>>>>> http://lists.allstarlink.org/c >>>>>>> gi-bin/mailman/listinfo/app_rpt-users and scroll down to the >>>>>>> bottom of >>>>>>> the page. Enter your email address and press the "Unsubscribe or >>>>>>> edit >>>>>>> options button" >>>>>>> You do not need a password to unsubscribe, you can do it via >>>>>>> email >>>>>>> confirmation. If you have trouble unsubscribing, please send a >>>>>>> message to >>>>>>> the list detailing the problem. >>>>>>> >>>>>> _______________________________________________ >>>>>> App_rpt-users mailing list >>>>>> App_rpt-users(a)lists.allstarlink.org >>>>>> >>>>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >>>>>> >>>>>> To unsubscribe from this list please visit >>>>>> http://lists.allstarlink.org/c >>>>>> gi-bin/mailman/listinfo/app_rpt-users and scroll down to the >>>>>> bottom of >>>>>> the page. Enter your email address and press the "Unsubscribe or >>>>>> edit >>>>>> options button" >>>>>> You do not need a password to unsubscribe, you can do it via >>>>>> email >>>>>> confirmation. If you have trouble unsubscribing, please send a >>>>>> message to >>>>>> the list detailing the problem. >>>>>> >>>>> >>>>> >>>>> ------------------------------ >>>>> >>>>> _______________________________________________ >>>>> App_rpt-users mailing list >>>>> App_rpt-users(a)lists.allstarlink.org >>>>> >>>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >>>>> >>>>> To unsubscribe from this list please visit >>>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >>>>> and scroll down to the bottom of the page. Enter your email >>>>> address and press the "Unsubscribe or edit options button" >>>>> You do not need a password to unsubscribe, you can do it via email >>>>> confirmation. If you have trouble unsubscribing, please send a >>>>> message to the list detailing the problem. >>>> _______________________________________________ >>>> App_rpt-users mailing list >>>> App_rpt-users(a)lists.allstarlink.org >>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >>>> >>>> To unsubscribe from this list please visit >>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >>>> and scroll down to the bottom of the page. Enter your email address >>>> and press the "Unsubscribe or edit options button" >>>> You do not need a password to unsubscribe, you can do it via email >>>> confirmation. If you have trouble unsubscribing, please send a >>>> message to the list detailing the problem. >>> _______________________________________________ >>> App_rpt-users mailing list >>> App_rpt-users(a)lists.allstarlink.org >>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >>> >>> To unsubscribe from this list please visit >>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >>> and scroll down to the bottom of the page. Enter your email address >>> and press the "Unsubscribe or edit options button" >>> You do not need a password to unsubscribe, you can do it via email >>> confirmation. If you have trouble unsubscribing, please send a >>> message to the list detailing the problem. >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users(a)lists.allstarlink.org >> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >> >> To unsubscribe from this list please visit >> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >> and scroll down to the bottom of the page. Enter your email address >> and press the "Unsubscribe or edit options button" >> You do not need a password to unsubscribe, you can do it via email >> confirmation. If you have trouble unsubscribing, please send a >> message to the list detailing the problem. > _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > and scroll down to the bottom of the page. Enter your email address > and press the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email > confirmation. If you have trouble unsubscribing, please send a message > to the list detailing the problem.

2 1

Re: [App_rpt-users] iaxrpt
by mwbesemer＠cox.net 29 Jun '18

29 Jun '18

Bob - do you mean the IP of the node itself? Mike On Fri, Jun 29, 2018 at 11:01 AM, Bob Pyke wrote: > If both devices are behind the router, the sub address needs to be > used for iaxrpt, not your public IP address. e.g. 192.168.0.5 > > Thanks, > Bob > K6ECM > 73 > > >> On Jun 29, 2018, at 7:49 AM, mwbesemer(a)cox.net wrote: >> >> David, >> >> WRT your first statement, if I'm connecting via my Windows machine to >> my local IP, am I really exiting my LAN and coming back in? Or am I >> routing straight to the IP of my node. I have DD-WRT on my router >> have have the port forwarded. (I really expect my problem to be >> there - port forwarding has historically bit me in the butt.) BTW, >> my node is set for DHCP, but in the router, I have that MAC address >> assigned to a fixed IP address. >> >> I've tried using xxx.xxx.xxx.xxx:4569 and that doesn't help. >> >> I probably confused people by referencing the hamvoip document. I'm >> using ASL, but the hamvoip document was recommend to me as a guide to >> set up iaxrpt on my node. >> >> I'll try the traccert tonight when I get home. >> >> Many thanks, >> >> Mike >> WM4B >> >>> On Fri, Jun 29, 2018 at 10:18 AM, David Shaw wrote: >>> >>> Most new routers won't allow you to exit the local network (LAN) and >>> come >>> back in. This might happen if you use a domain name that is >>> associated with >>> your public address. If you want to use your public domain name to >>> access >>> your node from inside your LAN. You'll need to add a DNS entry to >>> your >>> router. **See "Side Note" below >>> >>> By default IAX2 uses UDP port 4569 and the bind address is set to >>> all >>> interfaces/addresses in the ASL OS (allstarlink.org) As for the >>> hamvoip.com >>> settings, you should check with them. >>> >>> Are you using the hostname or IP address to access your node? >>> Like Mike stated, use xxx.xxx.xxx.xxx:4569 from your local (LAN) >>> devices. >>> >>> Testing: >>> From your windows based computer. Try tracert and the IPaddress of >>> the node. >>> >>> tracert 192.168.x.x >>> >>> 1 <1 ms <1 ms <1 ms 192.168.x.x >>> >>> There should be only one hope to your node if your windows computer >>> in on >>> the same network. >>> >>> Side note: >>> I use dhcp on all my nodes on my LAN networks. I give them static >>> address >>> via the DHCP server. I also change the hostname on the node. i.e. >>> asl2060 >>> This allows the router's internal DNS server to associate the >>> hostname and >>> IP address for the ASL node. Some routers will allow you to add a >>> domain >>> name. >>> Also there is no need to open TCP port forwarding on you router for >>> IAX2 >>> 4569. >>> >>> David >>> >>> >>> >>> >>> -- >>> Thanks, David >>> >>> "Laws that forbid the carrying of arms...disarm only those who are >>> neither >>> inclined nor determined to commit crimes. Such laws make things >>> worse for >>> the assaulted and better for the assailants; they serve rather to >>> encourage >>> than prevent homicides, for an unarmed man may be attacked with >>> greater >>> confidence than an armed one." >>> Thomas Jefferson >>> >>>> On Fri, Jun 29, 2018 at 3:58 AM, <mwbesemer(a)cox.net> wrote: >>>> >>>> No. I've never seen reference to that. I'm still in the initial >>>> phase of >>>> setting up this node; have not messed with rpt.conf yet. >>>> >>>> Mike >>>> WM4B >>>> >>>> >>>> On Thu, Jun 28, 2018 at 11:11 PM, Bob Pyke wrote: >>>> >>>> Did you add your local node address for each node in the rpt,conf >>>> [nodes] >>>>> stanza? >>>>> Thanks, >>>>> Bob >>>>> K6ECM >>>>> 73 >>>>> >>>>> >>>>>> On Jun 28, 2018, at 6:12 PM, Mike <mm(a)midnighteng.com> wrote: >>>>>> >>>>>> >>>>>> Mike, >>>>>> >>>>>> Still a lot of possibilities of things that may not be right but, >>>>>> >>>>>> Just so that you are conducting a 'good test' behind your nat >>>>>> through >>>>>> wifi, >>>>>> >>>>>> put your phone in airplane mode, then turn just the wifi on and >>>>>> connect. >>>>>> >>>>>> You might also want to turn the forwarding to just the UDP 4569 >>>>>> and >>>>>> specify that in your phone connect, >>>>>> >>>>>> guessing your using the android iaxrpt.... like this for your >>>>>> IP... >>>>>> >>>>>> 192.169.1.101:4569 < :port especially if not the norm, but do >>>>>> it >>>>>> anyway. >>>>>> That's a few things to investigate anyway, >>>>>> >>>>>> Let me know if your still having issues. >>>>>> >>>>>> Oh... don't forget to get back out of airplane mode / turn >>>>>> cellular back >>>>>> on when done. >>>>>> >>>>>> Hate to see ya late for dinner ...lol >>>>>> ...mike/kb8jnm >>>>>> >>>>>>> On 6/28/2018 8:00 PM, Mike Besemer wrote: >>>>>>> Making progress on my node. After several false starts I >>>>>>> finally got >>>>>>> the node connected and am able to connect via iaxrpt from my >>>>>>> Android >>>>>>> devices if I use my EXTERNAL IP address. >>>>>>> >>>>>>> I cannot connect from Android or Windows using my INTERAL IP >>>>>>> address. I >>>>>>> followed the guide at hamvoip.com and have double checked >>>>>>> everything. >>>>>>> >>>>>>> The port is open for both UDP and TCP connections. The firewall >>>>>>> seems >>>>>>> ok. >>>>>>> >>>>>>> It has to be something obvious. What did I miss? >>>>>>> >>>>>>> Mike >>>>>>> >>>>>>> WM4B >>>>>>> >>>>>>> >>>>>>> >>>>>>> _______________________________________________ >>>>>>> App_rpt-users mailing list >>>>>>> App_rpt-users(a)lists.allstarlink.org >>>>>>> >>>>>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >>>>>>> >>>>>>> To unsubscribe from this list please visit >>>>>>> >>>>>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >>>>>>> and scroll down to the bottom of the page. Enter your email >>>>>>> address and >>>>>>> press the "Unsubscribe or edit options button" >>>>>>> You do not need a password to unsubscribe, you can do it via >>>>>>> email >>>>>>> confirmation. If you have trouble unsubscribing, please send a >>>>>>> message to >>>>>>> the list detailing the problem. >>>>>>> >>>>>> >>>>>> _______________________________________________ >>>>>> App_rpt-users mailing list >>>>>> App_rpt-users(a)lists.allstarlink.org >>>>>> >>>>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >>>>>> >>>>>> To unsubscribe from this list please visit >>>>>> >>>>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >>>>>> and >>>>>> scroll down to the bottom of the page. Enter your email address >>>>>> and press >>>>>> the "Unsubscribe or edit options button" >>>>>> You do not need a password to unsubscribe, you can do it via >>>>>> email >>>>>> confirmation. If you have trouble unsubscribing, please send a >>>>>> message to >>>>>> the list detailing the problem. >>>>>> >>>>> >>>>> >>>>> ------------------------------ >>>>> >>>>> _______________________________________________ >>>>> App_rpt-users mailing list >>>>> App_rpt-users(a)lists.allstarlink.org >>>>> >>>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >>>>> >>>>> To unsubscribe from this list please visit >>>>> http://lists.allstarlink.org/c >>>>> gi-bin/mailman/listinfo/app_rpt-users and scroll down to the >>>>> bottom of >>>>> the page. Enter your email address and press the "Unsubscribe or >>>>> edit >>>>> options button" >>>>> You do not need a password to unsubscribe, you can do it via email >>>>> confirmation. If you have trouble unsubscribing, please send a >>>>> message to >>>>> the list detailing the problem. >>>>> >>>> _______________________________________________ >>>> App_rpt-users mailing list >>>> App_rpt-users(a)lists.allstarlink.org >>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >>>> >>>> To unsubscribe from this list please visit >>>> http://lists.allstarlink.org/c >>>> gi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom >>>> of >>>> the page. Enter your email address and press the "Unsubscribe or >>>> edit >>>> options button" >>>> You do not need a password to unsubscribe, you can do it via email >>>> confirmation. If you have trouble unsubscribing, please send a >>>> message to >>>> the list detailing the problem. >>>> >>> >>> >>> ------------------------------ >>> >>> _______________________________________________ >>> App_rpt-users mailing list >>> App_rpt-users(a)lists.allstarlink.org >>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >>> >>> To unsubscribe from this list please visit >>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >>> and scroll down to the bottom of the page. Enter your email address >>> and press the "Unsubscribe or edit options button" >>> You do not need a password to unsubscribe, you can do it via email >>> confirmation. If you have trouble unsubscribing, please send a >>> message to the list detailing the problem. >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users(a)lists.allstarlink.org >> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >> >> To unsubscribe from this list please visit >> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >> and scroll down to the bottom of the page. Enter your email address >> and press the "Unsubscribe or edit options button" >> You do not need a password to unsubscribe, you can do it via email >> confirmation. If you have trouble unsubscribing, please send a >> message to the list detailing the problem. > _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > and scroll down to the bottom of the page. Enter your email address > and press the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email > confirmation. If you have trouble unsubscribing, please send a message > to the list detailing the problem.

2 1

Re: [App_rpt-users] iaxrpt
by mwbesemer＠cox.net 29 Jun '18

29 Jun '18

Bob, The node is set up and is registering on the website. I'm able to connect via my android iaxrpt and have had QSOs in that fashion. It is not yet hooked to any RF device; my intent is to get it set up as much as possible before going 'live' via RF. The issue 'seems' to be with my ability to connect via my internal IP, but MAY actually be linked to my Windows installations of iaxrpt. I've tried two different machines with Windows and can't get it to work, but I really need to verify if its an internal IP issue or an issue with the Windows iaxrpt setup. Hopefully I'll be able to do that tonight. 73, Mike WM4B On Fri, Jun 29, 2018 at 10:01 AM, Bob Pyke wrote: > Please check out > https://wiki.allstarlink.org/wiki/Main_Pagehttps://wiki.allstarlink.org/wik… > which contains lots of good info. Here are a few things to be aware > of. > > Before attempting to connect (link) any device to the node, set the > node up first, so you have an operating node, which means Asterisk is > happy. > > The node is controlled (read that as setup) by configuring it, > changing the *.config files in /etc/asterisk > If using a DMK Engineering URI or URIx (or similar device), the green > light continually blinks when Asterisk is running and happy. If the > green light is solid, not blinking, Asterisk is not happy, and likely > not running. It may be happy, but the node not fully setup. > > Each time a change is made to one of the config files, asterisk must > be restarted for the changes to be effective. If you make a change and > restart asterisk, and the green light no longer blinks, reverse your > change and figure out what you may have done incorrectly. > > Most of all, take time to learn and enjoy the asterisk experience. > > Thanks, > Bob > K6ECM > 73 > > >> On Jun 29, 2018, at 3:58 AM, mwbesemer(a)cox.net wrote: >> >> No. I've never seen reference to that. I'm still in the initial >> phase of setting up this node; have not messed with rpt.conf yet. >> >> Mike >> WM4B >> >> >>> On Thu, Jun 28, 2018 at 11:11 PM, Bob Pyke wrote: >>> >>> Did you add your local node address for each node in the rpt,conf >>> [nodes] stanza? >>> Thanks, >>> Bob >>> K6ECM >>> 73 >>> >>> >>>> On Jun 28, 2018, at 6:12 PM, Mike <mm(a)midnighteng.com> wrote: >>>> >>>> >>>> Mike, >>>> >>>> Still a lot of possibilities of things that may not be right but, >>>> >>>> Just so that you are conducting a 'good test' behind your nat >>>> through wifi, >>>> >>>> put your phone in airplane mode, then turn just the wifi on and >>>> connect. >>>> >>>> You might also want to turn the forwarding to just the UDP 4569 and >>>> specify that in your phone connect, >>>> >>>> guessing your using the android iaxrpt.... like this for your >>>> IP... >>>> >>>> 192.169.1.101:4569 < :port especially if not the norm, but do it >>>> anyway. >>>> That's a few things to investigate anyway, >>>> >>>> Let me know if your still having issues. >>>> >>>> Oh... don't forget to get back out of airplane mode / turn cellular >>>> back on when done. >>>> >>>> Hate to see ya late for dinner ...lol >>>> ...mike/kb8jnm >>>> >>>>> On 6/28/2018 8:00 PM, Mike Besemer wrote: >>>>> Making progress on my node. After several false starts I finally >>>>> got the node connected and am able to connect via iaxrpt from my >>>>> Android devices if I use my EXTERNAL IP address. >>>>> >>>>> I cannot connect from Android or Windows using my INTERAL IP >>>>> address. I followed the guide at hamvoip.com and have double >>>>> checked everything. >>>>> >>>>> The port is open for both UDP and TCP connections. The firewall >>>>> seems ok. >>>>> >>>>> It has to be something obvious. What did I miss? >>>>> >>>>> Mike >>>>> >>>>> WM4B >>>>> >>>>> >>>>> >>>>> _______________________________________________ >>>>> App_rpt-users mailing list >>>>> App_rpt-users(a)lists.allstarlink.org >>>>> >>>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >>>>> >>>>> To unsubscribe from this list please visit >>>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >>>>> and scroll down to the bottom of the page. Enter your email >>>>> address and press the "Unsubscribe or edit options button" >>>>> You do not need a password to unsubscribe, you can do it via email >>>>> confirmation. If you have trouble unsubscribing, please send a >>>>> message to the list detailing the problem. >>>> >>>> _______________________________________________ >>>> App_rpt-users mailing list >>>> App_rpt-users(a)lists.allstarlink.org >>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >>>> >>>> To unsubscribe from this list please visit >>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >>>> and scroll down to the bottom of the page. Enter your email address >>>> and press the "Unsubscribe or edit options button" >>>> You do not need a password to unsubscribe, you can do it via email >>>> confirmation. If you have trouble unsubscribing, please send a >>>> message to the list detailing the problem. >>> >>> >>> ------------------------------ >>> >>> _______________________________________________ >>> App_rpt-users mailing list >>> App_rpt-users(a)lists.allstarlink.org >>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >>> >>> To unsubscribe from this list please visit >>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >>> and scroll down to the bottom of the page. Enter your email address >>> and press the "Unsubscribe or edit options button" >>> You do not need a password to unsubscribe, you can do it via email >>> confirmation. If you have trouble unsubscribing, please send a >>> message to the list detailing the problem. >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users(a)lists.allstarlink.org >> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >> >> To unsubscribe from this list please visit >> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >> and scroll down to the bottom of the page. Enter your email address >> and press the "Unsubscribe or edit options button" >> You do not need a password to unsubscribe, you can do it via email >> confirmation. If you have trouble unsubscribing, please send a >> message to the list detailing the problem. > > > ------------------------------ > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > and scroll down to the bottom of the page. Enter your email address > and press the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email > confirmation. If you have trouble unsubscribing, please send a message > to the list detailing the problem.

1 0

Re: [App_rpt-users] iaxrpt
by mwbesemer＠cox.net 29 Jun '18

29 Jun '18

No. I've never seen reference to that. I'm still in the initial phase of setting up this node; have not messed with rpt.conf yet. Mike WM4B On Thu, Jun 28, 2018 at 11:11 PM, Bob Pyke wrote: > Did you add your local node address for each node in the rpt,conf > [nodes] stanza? > Thanks, > Bob > K6ECM > 73 > > >> On Jun 28, 2018, at 6:12 PM, Mike <mm(a)midnighteng.com> wrote: >> >> >> Mike, >> >> Still a lot of possibilities of things that may not be right but, >> >> Just so that you are conducting a 'good test' behind your nat through >> wifi, >> >> put your phone in airplane mode, then turn just the wifi on and >> connect. >> >> You might also want to turn the forwarding to just the UDP 4569 and >> specify that in your phone connect, >> >> guessing your using the android iaxrpt.... like this for your IP... >> >> 192.169.1.101:4569 < :port especially if not the norm, but do it >> anyway. >> That's a few things to investigate anyway, >> >> Let me know if your still having issues. >> >> Oh... don't forget to get back out of airplane mode / turn cellular >> back on when done. >> >> Hate to see ya late for dinner ...lol >> ...mike/kb8jnm >> >>> On 6/28/2018 8:00 PM, Mike Besemer wrote: >>> Making progress on my node. After several false starts I finally >>> got the node connected and am able to connect via iaxrpt from my >>> Android devices if I use my EXTERNAL IP address. >>> >>> I cannot connect from Android or Windows using my INTERAL IP >>> address. I followed the guide at hamvoip.com and have double checked >>> everything. >>> >>> The port is open for both UDP and TCP connections. The firewall >>> seems ok. >>> >>> It has to be something obvious. What did I miss? >>> >>> Mike >>> >>> WM4B >>> >>> >>> >>> _______________________________________________ >>> App_rpt-users mailing list >>> App_rpt-users(a)lists.allstarlink.org >>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >>> >>> To unsubscribe from this list please visit >>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >>> and scroll down to the bottom of the page. Enter your email address >>> and press the "Unsubscribe or edit options button" >>> You do not need a password to unsubscribe, you can do it via email >>> confirmation. If you have trouble unsubscribing, please send a >>> message to the list detailing the problem. >> >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users(a)lists.allstarlink.org >> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >> >> To unsubscribe from this list please visit >> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >> and scroll down to the bottom of the page. Enter your email address >> and press the "Unsubscribe or edit options button" >> You do not need a password to unsubscribe, you can do it via email >> confirmation. If you have trouble unsubscribing, please send a >> message to the list detailing the problem. > > > ------------------------------ > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > and scroll down to the bottom of the page. Enter your email address > and press the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email > confirmation. If you have trouble unsubscribing, please send a message > to the list detailing the problem.

3 3

iaxrpt
by Mike Besemer 29 Jun '18

29 Jun '18

Making progress on my node. After several false starts I finally got the node connected and am able to connect via iaxrpt from my Android devices if I use my EXTERNAL IP address. I cannot connect from Android or Windows using my INTERAL IP address. I followed the guide at hamvoip.com <http://hamvoip.com/> and have double checked everything. The port is open for both UDP and TCP connections. The firewall seems ok. It has to be something obvious. What did I miss? Mike WM4B

3 3

installing allstarlink
by Dale Day 28 Jun '18

28 Jun '18

Could someone help me with getting allstar link up and running. I just can't allstar configured correctly to the point where I can tune the radios. I just don't understand what I am doing wrong.

4 9

statpost
by George Csahanin 28 Jun '18

28 Jun '18

I just found a problem and not sure how to fix it. Last Monday I changed my udp port number after some had indicated issues connecting. I was using 4569, though on my 28599 node 4570 seemed to work, though I never have inbound connects, just outbound. So after modifying the port numbers in iax.conf, rpt.conf, etc I restarted asterisk and changed the port mapping in my router. Still nobody can connect. So I looked at the downloaded rpt_extnodes file and the port number for both nodes is 4569. I have uncommented the statpost lines in rpt.conf, which is a Limey distro, BTW. Also, FWIW when I point a browser at http://stats.allstarlink.org/uhandler.php the response is error... What I have: ; ** For Limey Linux ** statpost_program=/bin/wget,-q,--timeout=15,--tries=1,--output-document=/dev/null statpost_url=http://stats.allstarlink.org/uhandler.php ; Status updates What might I have wrong? GeorgeC W2DB -- George Csahanin 10100 Carson Ranch Rd. Crowley, TX 76036 682-708-5716 home 401-338-0568 cel

4 5

Parrot Mode
by kc8qch＠gmail.com 28 Jun '18

28 Jun '18

Good Afternoon/evening/morning to everyone, Tell me about parrot mode. I am trying to play around with it and have read what I have found online, but I am still not clear on a few things: 1. Does it only work on the node it is active for or could the node be connected to another node and used on that node? For example. Node A has Parrot mode turned on. It is connected to node B. Can you transmit on Node B and have Node A parrot what it heard back? 2. Does it only work over the radio or can it be used on a radio less node? I am trying to set one up on a private node vs a public node so I can move it around as needed in my own network for testing things. I am just trying to understand the mode more is all. Thanks 😊 Jeff Jeff Lehman, KC8QCH Email: kc8qch(a)gmail.com Webmaster Hamilton County ARPSC http://www.hamcoarpsc.org Email: hamcoarpsc(a)gmail.com Allstar Node 47374 Administrator The Guild/IRN http://theguildglobal.org

2 1

install allmon2 on asl
by Wayne 27 Jun '18

27 Jun '18

hi, can't remember how to install allmon2 on the ASL version. would appreciate any help thanks Wayne

3 2