August 2018 - App_rpt-users - lists.keekles.org

Re: [App_rpt-users] Fwd: Node 46831 is no longer in the database
by Bryan Fields 06 Aug '18

06 Aug '18

On 8/5/18 2:22 PM, "STAN SIEMS" wrote: > my node 46831 no longer shows up in the data base and I can not connect > to any nodes it has worked fine for over 6mo then quit there have been > no changes in programing It's likely you're behind NAT and your NAT device is no longer doing a static mapping. * Name : 46831 Secret : <Set> Context : radio-in Mailbox : Dynamic : Yes Callnum limit: 0 Calltoken req: No Trunk : No Callerid : "" <> Expire : 255260283 ACL : No Addr->IP : 198.40.250.201 Port 44288 Your port you have configured for that server is 4565, but it's using 44288 to register. It's not posting to the stats server at all, and looks like that is disabled in rpt.conf. -- Bryan Fields 727-409-1194 - Voice http://bryanfields.net

1 0

Rxondelay in SimpleUsb
by Angelo 04 Aug '18

04 Aug '18

Good morning all, I have been trying to set the rxondelay in the simpleusb to different values. No matter what value I put in, it seems the behavior does not change. I remember reading a while back that function may not be compiled standard release. I am running the new version of ASL. I think the release was in April of this year. Can anyone confirm this? 73 de Angelo

2 2

Re: [App_rpt-users] App_rpt-users Digest, Vol 114, Issue 2
by Greg Mohr 03 Aug '18

03 Aug '18

David, Your tip did the trick! Why would an update change the rpt.conf duplex setting to 1 from 2? All other settings stayed the same. Thank you! Greg, W2GCM -----Original Message----- From: App_rpt-users [mailto:app_rpt-users-bounces@lists.allstarlink.org] On Behalf Of app_rpt-users-request(a)lists.allstarlink.org Sent: Thursday, August 02, 2018 12:00 PM To: app_rpt-users(a)lists.allstarlink.org Subject: App_rpt-users Digest, Vol 114, Issue 2 Send App_rpt-users mailing list submissions to app_rpt-users(a)lists.allstarlink.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users or, via email, send a message with subject or body 'help' to app_rpt-users-request(a)lists.allstarlink.org You can reach the person managing the list at app_rpt-users-owner(a)lists.allstarlink.org When replying, please edit your Subject line so it is more specific than "Re: Contents of App_rpt-users digest..." This site is dedicated to the memory of Jim Dixon WB6NIL Today's Topics: 1. After last update to audio is not working (Greg Mohr) 2. Re: After last update to audio is not working (Mike) 3. Re: After last update to audio is not working (JJC) 4. Re: After last update to audio is not working (David McGough) 5. ASL without OSS (JJC) ---------------------------------------------------------------------- Message: 1 Date: Wed, 1 Aug 2018 16:57:08 +0000 From: Greg Mohr <Greg(a)gmohr.com> To: "app_rpt-users(a)lists.allstarlink.org" <app_rpt-users(a)lists.allstarlink.org> Subject: [App_rpt-users] After last update to audio is not working Message-ID: <EC6B484460B0724596A8E89BFF6B542B72B181E5(a)SRV-MOHR.mohrnet.local> Content-Type: text/plain; charset="us-ascii" I just updated to the most recent version of the Allstar image and my audio on my repeater disappeared. I can key up the system and it will reply back with the courtesy tone and the required ID every 15 minutes. It just doesn't transmit the audio through when someone trys to call out to another person. I checked the cables and radios and all are up and running and connected fine. I have disconnectged the cables and plugged them back in to test and the same lack of audio occurs. When I plug in the old ham-o-matic, audio comes through. Where should I be looking to check audio settings for the Motorola gm300 radios in the rpt.conf file? Thank you, Greg W2GCM

3 2

ASL without OSS
by JJC 01 Aug '18

01 Aug '18

So it's a quick and dirty post but it's all that I had time to do.... Please be sure to read the whole thing including the "CAVEATS" section if you try this at home lol... http://enhanced.github.io/2018/08/ASL_With_ALSA Using the info that I posted at the above URL I have a current kernel running and very clean audio, please note the TO-DO section also.. because the "clean" part is anecdotal. Please let me know if something isn't working for you (or if it is) and we can adjust fire to compensate as needed.. N0PKT Jay

1 0

After last update to audio is not working
by Greg Mohr 01 Aug '18

01 Aug '18

I just updated to the most recent version of the Allstar image and my audio on my repeater disappeared. I can key up the system and it will reply back with the courtesy tone and the required ID every 15 minutes. It just doesn't transmit the audio through when someone trys to call out to another person. I checked the cables and radios and all are up and running and connected fine. I have disconnectged the cables and plugged them back in to test and the same lack of audio occurs. When I plug in the old ham-o-matic, audio comes through. Where should I be looking to check audio settings for the Motorola gm300 radios in the rpt.conf file? Thank you, Greg W2GCM

4 3

NanoPi
by Bob Good 01 Aug '18

01 Aug '18

Hi Guys I have tried loading ASL_1.01-20180228-armhf-nanopi image onto a NanoPi Seems to load fine I run the updates etc then the Menu all seems OK but AllStar does not seem to run ? return email: <mailto:bob@Fot.com.au> bob(a)Fot.com.au NODE=47324 REGPASS=47324:xxxxx@register.allstarlink.org ; This must be changed to your node number, password Call sign: VK6Z Interface type: SimpleUSB/usb_47324 ; SimpleUSB Echolink Callsign: INVALID Echolink node: 000000 ASL node used: Ping test to 8.8.8.8 PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data. 64 bytes from 8.8.8.8: icmp_seq=1 ttl=117 time=60.5 ms 64 bytes from 8.8.8.8: icmp_seq=2 ttl=117 time=60.1 ms 64 bytes from 8.8.8.8: icmp_seq=3 ttl=117 time=59.8 ms 64 bytes from 8.8.8.8: icmp_seq=4 ttl=117 time=60.1 ms --- 8.8.8.8 ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 3004ms rtt min/avg/max/mdev = 59.856/60.180/60.579/0.357 ms Ping test to register.allstarlink.org PING register.allstarlink.org (67.215.233.178) 56(84) bytes of data. 64 bytes from seal.lambdatel.com (67.215.233.178): icmp_seq=1 ttl=50 time=209 ms 64 bytes from seal.lambdatel.com (67.215.233.178): icmp_seq=2 ttl=50 time=208 ms 64 bytes from seal.lambdatel.com (67.215.233.178): icmp_seq=3 ttl=50 time=208 ms 64 bytes from seal.lambdatel.com (67.215.233.178): icmp_seq=4 ttl=50 time=287 ms --- register.allstarlink.org ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 3004ms rtt min/avg/max/mdev = 208.420/228.404/287.132/33.912 ms Ouput of ifconfig eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 192.168.168.55 netmask 255.255.255.0 broadcast 192.168.168.255 inet6 fe80::6888:f0ff:fe2f:e5b prefixlen 64 scopeid 0x20<link> ether 6a:88:f0:2f:0e:5b txqueuelen 1000 (Ethernet) RX packets 2688 bytes 223583 (218.3 KiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 1227 bytes 325560 (317.9 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 device interrupt 33 lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536 inet 127.0.0.1 netmask 255.0.0.0 inet6 ::1 prefixlen 128 scopeid 0x10<host> loop txqueuelen 1000 (Local Loopback) RX packets 32 bytes 2608 (2.5 KiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 32 bytes 2608 (2.5 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 Output of lsmod grep dahdi IAX2 registry Unable to connect to remote asterisk (does /var/run/asterisk.ctl exist?) Asterisk version: Unable to connect to remote asterisk (does /var/run/asterisk.ctl exist?) Current date and time: 2018-07-23.11:36 updatenodelist service running? root 657 0.0 0.4 4428 2392 ? Ss 11:14 0:00 /bin/bash /usr/local/bin/rc.updatenodelist & root 1637 0.0 0.1 3764 548 pts/0 S+ 11:40 0:00 grep updatenodelist /tmp/rpt_extnodes-temp file -rw-r--r-- 1 root root 0 Jul 23 11:15 /tmp/rpt_extnodes-temp /var/lib/asterisk/rpt_extnodes file -rwx------ 1 root root 141311 Jul 23 11:09 /var/lib/asterisk/rpt_extnodes ####### Begin warnings from messages file ####### Begin warnings from messages.1 file journalctl –xe Using username "repeater". repeater@repeater's password: _ _ ____ _ _ _ | \ | | __ _ _ __ ___ | _ \(_) | \ | | ___ ___ | \| |/ _` | '_ \ / _ \| |_) | | | \| |/ _ \/ _ \ | |\ | (_| | | | | (_) | __/| | | |\ | __/ (_) | |_| \_|\__,_|_| |_|\___/|_| |_| |_| \_|\___|\___/ Welcome to ARMBIAN 5.41 user-built Debian GNU/Linux 9 (stretch) 4.14.18-sunxi System load: 0.00 0.02 0.00 Up time: 9 min Local users: 2 Memory usage: 10 % of 493MB IP: 192.168.168.54 CPU temp: 29°C Usage of /: 10% of 15G Last login: Mon Jul 23 10:04:18 2018 from 192.168.168.26 repeater@repeater:~$ repeater@repeater:~$ sudo -s [sudo] password for repeater: root@repeater:/home/repeater# journalctl -xe -- The start-up result is done. Jul 23 10:05:21 repeater systemd[1]: dev-dahdi-pseudo.device: Job dev-dahdi-pseu Jul 23 10:05:21 repeater systemd[1]: Timed out waiting for device dev-dahdi-pseu -- Subject: Unit dev-dahdi-pseudo.device has failed -- Defined-By: systemd -- Support: <https://www.debian.org/support> https://www.debian.org/support -- -- Unit dev-dahdi-pseudo.device has failed. -- -- The result is timeout. Jul 23 10:05:21 repeater systemd[1]: Dependency failed for Asterisk PBX and tele -- Subject: Unit asterisk.service has failed -- Defined-By: systemd -- Support: <https://www.debian.org/support> https://www.debian.org/support -- -- Unit asterisk.service has failed. -- -- The result is dependency. Jul 23 10:05:21 repeater systemd[1]: asterisk.service: Job asterisk.service/star Jul 23 10:05:21 repeater systemd[1]: dev-dahdi-pseudo.device: Job dev-dahdi-pseu Jul 23 10:05:21 repeater sudo[1169]: pam_unix(sudo:session): session closed for Jul 23 10:06:23 repeater sudo[1370]: repeater : TTY=pts/2 ; PWD=/home/repeater ; Jul 23 10:06:23 repeater sudo[1370]: pam_unix(sudo:session): session opened for lines 1316-1338/1338 (END) Current default time zone: 'Australia/Perth' Local time is now: Mon Jul 23 09:35:43 AWST 2018. Universal Time is now: Mon Jul 23 01:35:43 UTC 2018. grep: /etc/systemd/network/eth0.network: No such file or directory /usr/local/sbin/net-setup: line 171: [: missing `]' mv: cannot stat '/tmp/extensions.conf.tmp': No such file or directory mv: cannot stat '/tmp/echolink.conf.tmp': No such file or directory mv: cannot stat '/tmp/iax.conf.tmp': No such file or directory mv: cannot stat '/tmp/modules.conf.tmp': No such file or directory mv: cannot stat '/tmp/rpt.conf.tmp': No such file or directory mv: cannot stat '/tmp/savenode.conf.tmp': No such file or directory mv: cannot stat '/tmp/manager.conf.tmp': No such file or directory mv: cannot stat '/tmp/usbradio.conf.tmp': No such file or directory mv: cannot stat '/tmp/simpleusb.conf.tmp': No such file or directory mv: cannot stat '/tmp/voter.conf.tmp': No such file or directory Using username "repeater". repeater@repeater's password: Anyone got any ideas ?? 73 VK6ZGN Bob <mailto:Bob@Fot.com.au> Bob(a)Fot.com.au Western Australia Mob. <tel:61%C2%A0%20%280%29%20418%20902%20194> 61 (0) 418 902 194 The contents of this e-mail (including any attachments) may be confidential and privileged. Any unauthorised use of this document or it's contents is prohibited. If you have received this e-mail in error, please notify us immediately and erase this document E&OE

4 5