- App_rpt-users - lists.keekles.org

While on the topic of USB soundcards....
by David McGough 16 Mar '16

16 Mar '16

Has anyone played with one of these boards?? See: http://www.ebay.com/itm/171883307218 I'm not seeing any audio input pads on it, since it's targeted as an output device. But, I like the I2S DAC (which includes DSP alias filtering, I think?), dedicated headphone amp and non-potted CM108! This should provide a stellar output audio S/N--something that is sometimes lacking in the el-cheapo cards. Oh, and a decent price, too! 73, David KB4FXC

1 0

Re: [App_rpt-users] astsrc tree
by Barry 15 Mar '16

15 Mar '16

At 09:13 14/03/2016, Steve Zingman wrote: >Barry, >There is no a chan_dmr. We used chan_usrp to build DMRGateway. The >documentation is available at <https://github.com/N4IRS/DMRGateway> There >are 3 documents to look at: I looked at the DMRGatewayDiagram.pdf diagram very interesting looks like its working exactly the same way as chan_dstar and g2_link does including an ambe dongle with a serial driver perhaps the chan_dstar code could be adapted to work with the dmr dongle there is possibilities Thanks for the info share. Barry G8SAU >DMRGateway.rtf, TechOverview.pdf and DMRGatewayDiagram.pdf. We are running >the Gateway on AllStar node 2100 bridging AllStar to both Mototrbo and >BrandMeister. > >73, Steve N4IRS > >On 03/14/2016 03:03 AM, Barry wrote: >>At 21:31 13/03/2016, you wrote: >>>There is a new D-Star Gateway in the works. It will be built using the >>>same methods we used doe DMRGateway. >>> >>>73, Steve N4IRS >> >>Where is the chan_dmr code available to look at ? >> >>Barry >>_______________________________________________ >>App_rpt-users mailing list >>App_rpt-users(a)ohnosec.org >>http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users >> >>To unsubscribe from this list please visit >>http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down >>to the bottom of the page. Enter your email address and press the >>"Unsubscribe or edit options button" >>You do not need a password to unsubscribe, you can do it via email >>confirmation. If you have trouble unsubscribing, please send a message to >>the list detailing the problem. > >-- >"Anything is possible if you don't know what you are talking about." >1st Law of Logic

3 4

astsrc tree
by Barry 15 Mar '16

15 Mar '16

Hi,, I am wanting to compile in some experimental channel_drivers and cant seems to locate the src tree for asterisk as used in allstar seems the ACID scripts no longer work phase1.sh phase2.sh etc. I have src tree but its about 5-6 years old. Im looking for the up to date version. Some one please point me in the correct direction im lost hi Barry G8SAU

5 9

Re: [App_rpt-users] astsrc tree
by Barry 14 Mar '16

14 Mar '16

At 21:27 13/03/2016, Pierre Martel wrote: >when you say chan_dstar. is it to create a dstar repeater controler. or a >Bridge to dstar and allstar. I use it already for the past 6 years its works perfect and is in use on 5 other Xreflector to Allstar gateways world wide. chan_dstar is a channel driver that leaves ports than can be linked into g2_link from the freestar dstar package. Interesting that some one is doing a new version the source code i have is open to any one who wants it. Barry >that shows me the src tree but I cant see how to download the tar ball the >tool on the page dont work. > >Steve N4IRS > >On 03/13/2016 09:11 AM, mike(a)midnighteng.com wrote: > ><http://x.allstarlink.org/svn-trunk.tar.gz>http://x.allstarlink.org/svn-trunk.tar.gz

1 0

Dial x86 download?
by Joe Bennett 13 Mar '16

13 Mar '16

Is it just me or is the link to Dial on allstarlink.org supposed to lead you to a page that refers to ACID? Also the download link leads you to an ISO that is named acid_centos.iso??? Have a XIPAR machine that I'd just like to upgrade to a supported allstar load... No RPi, just an x86 machine at the site... -Joe KA3NAM

2 1

connection failed on iPhone WIFI
by Jim Frederick 12 Mar '16

12 Mar '16

OK I was able to get the computer to connect to the iPhone for WIFI but it will not connect to anything, just get a connection failed... if I change the SSID and Password back to the Netgear router it works fine so..... is this a "port" issue or ???? I know there is a log that will point to what the error is but.... I don't know where it is HELP Jim

2 1

Installing DIAL on Rpi2
by Eric Meth 12 Mar '16

12 Mar '16

I have downloaded the Raspberry Pi2 System image from Allstarlink.org (I have installed Rasbian, Debian, NOOBS, and other files and they work properly!) When I put the DIAL image onto an SD card I only get a multi-screen on bootup and nothing else. I have tried Win32DiskImager, rufus-2.7 and SDFormatter and get the same results Anyone have a suggestion to put the image on a card that boots properly??? I have been working on this for over a week. The DIAL Image onto a computer installs properly! Eric - ve3ei

2 3

SOC - ODROID-C2
by mike＠midnighteng.com 12 Mar '16

12 Mar '16

Finally, a Mini Board computer that answers all of my needs ! I'm going to be busy for a while. Thought many of you might have a interest in this. w/2g of ram, there probably is not many utility things that this can't do. Lot's of I/O & @ $40 to boot. ODROID-C2 Just out this past week. http://www.hardkernel.com/main/products/prdt_info.php?g_code=G145457216438 ...mike/kb8jnm

1 0

EchoLink configuration settings
by Dennis 11 Mar '16

11 Mar '16

4 3

Question on auto leveling codec
by John Griffith 10 Mar '16

10 Mar '16

Haven't found much on this, but I remember a while back I read something about one of the codecs for Asterisk that had an internal option to enable ALC (automatic level control). Not sure if this was a compression codec or not, but it would be nice to use a compressionless one (like ULAW) for use in my repeater output. Right now I'm using an analog ALC unit between the URI and radio, but it's introducing AC hum into the repeater output. The noise is originating in the poorly shielded ALC unit. Does anyone have ALC working within Asterisk? If so is it hard to make it work in App_Rpt for the repeater output? I need to keep the input constant because I'm using DSP and CTCSS for squelch, so output is all I'm looking for. Thank you. John N7OKN

2 1