- App_rpt-users - lists.keekles.org

Re: [App_rpt-users] A few questions this morning, shutting down a node
by Steve Zingman 18 Sep '15

18 Sep '15

First you define the DTMF command in rpt.conf in the functions stanza for the node in question: A matching command may already be defined. [functions_1998] 802 = cop,2 ; System enable 803 = cop,3 ; System disable [functions_1999] 902 = cop,2 ; System enable 903 = cop,3 ; System disable ...... Then the dtmf command would be *903 to disable the node *902 to enable node 1999 the dtmf command would be *803 to disable the node *802 to enable node 1998 73, Steve N4IRS On 9/18/2015 3:18 PM, Loren Tedford wrote: > so how do i put that into a dtmf command > > > Loren Tedford (KC9ZHV) > Email: lorentedford(a)gmail.com <mailto:lorentedford@gmail.com> > Phone: 618-553-0806 > http://www.lorentedford.com > http://www.kc9zhv.com > http://hub.kc9zhv.com > > On Fri, Sep 18, 2015 at 1:02 PM, Steve Zingman <szingman(a)msgstor.com > <mailto:szingman@msgstor.com>> wrote: > > Boy, am I bad at editing the subject line! > > Loren, > Not sure how you want to "shut down" the node. > You could disable the node with: > rpt cmd 2154 cop 3 2154 where 2154 is the node to shut down. > rpt cmd 2154 cop 2 2154 would enable said node. > > Tell us more... > > 73, Steve N4IRS > > On 9/18/2015 12:00 PM, app_rpt-users-request(a)ohnosec.org > <mailto:app_rpt-users-request@ohnosec.org> wrote: > > Message: 2 > Date: Fri, 18 Sep 2015 10:13:13 -0500 > From: Loren Tedford<lorentedford(a)gmail.com > <mailto:lorentedford@gmail.com>> > To: app_rpt mailing list<app_rpt-users(a)ohnosec.org > <mailto:app_rpt-users@ohnosec.org>> > Subject: [App_rpt-users] A few questions this morning > Message-ID: > > <CAK=eTyh5zTvTCpJcziYLbBZJ0-9=6nhg=jKqtoA8+8nEXig9CQ(a)mail.gmail.com> > Content-Type: text/plain; charset="utf-8" > > Hello I am working on a dtmf script that will shut down the > node that the > script is running on.. The problem is their is two repeaters > running on the > same node so I would just like to shut off the one not both.. > > >

1 0

A few questions this morning, shutting down a node
by Steve Zingman 18 Sep '15

18 Sep '15

Boy, am I bad at editing the subject line! Loren, Not sure how you want to "shut down" the node. You could disable the node with: rpt cmd 2154 cop 3 2154 where 2154 is the node to shut down. rpt cmd 2154 cop 2 2154 would enable said node. Tell us more... 73, Steve N4IRS On 9/18/2015 12:00 PM, app_rpt-users-request(a)ohnosec.org wrote: > Message: 2 > Date: Fri, 18 Sep 2015 10:13:13 -0500 > From: Loren Tedford<lorentedford(a)gmail.com> > To: app_rpt mailing list<app_rpt-users(a)ohnosec.org> > Subject: [App_rpt-users] A few questions this morning > Message-ID: > <CAK=eTyh5zTvTCpJcziYLbBZJ0-9=6nhg=jKqtoA8+8nEXig9CQ(a)mail.gmail.com> > Content-Type: text/plain; charset="utf-8" > > Hello I am working on a dtmf script that will shut down the node that the > script is running on.. The problem is their is two repeaters running on the > same node so I would just like to shut off the one not both..

1 0

rpt cmd 2154 cop 3 2154 shut down a node
by Steve Zingman 18 Sep '15

18 Sep '15

Loren, Not sure how you want to "shut down" the node. You could disable the node with: rpt cmd 2154 cop 3 2154 where 2154 is the node to shut down. rpt cmd 2154 cop 2 2154 would enable said node. Tell us more... 73, Steve N4IRS On 9/18/2015 12:00 PM, app_rpt-users-request(a)ohnosec.org wrote: > Message: 2 > Date: Fri, 18 Sep 2015 10:13:13 -0500 > From: Loren Tedford<lorentedford(a)gmail.com> > To: app_rpt mailing list<app_rpt-users(a)ohnosec.org> > Subject: [App_rpt-users] A few questions this morning > Message-ID: > <CAK=eTyh5zTvTCpJcziYLbBZJ0-9=6nhg=jKqtoA8+8nEXig9CQ(a)mail.gmail.com> > Content-Type: text/plain; charset="utf-8" > > Hello I am working on a dtmf script that will shut down the node that the > script is running on.. The problem is their is two repeaters running on the > same node so I would just like to shut off the one not both..

1 0

A few questions this morning
by Loren Tedford 18 Sep '15

18 Sep '15

Hello I am working on a dtmf script that will shut down the node that the script is running on.. The problem is their is two repeaters running on the same node so I would just like to shut off the one not both.. Next issue is Ezstream... yes its been a hassle it keeps locking up on the data center and i have to keep killing ezstream and restarting asterisk.. here is the script im using to kill it however is their any fix to let it just run with out killing asterisk and restarting everything.. sh restart.sh script #!/bin/bash kill -9 $(pgrep ezstream)& service asterisk restart Ok the last issue this morning I want to ask about is connecting via telephone through the asterisk phone portal their is many issues with this.. Some times it works and some times it doesnt and with no understanding of where the issue is.. Basically at this current time anyone wishing to connect up to the phone portal 41715 they enter their pin and then its silent no further directions or information.. Any help on the above would be great thanks Loren Tedford (KC9ZHV) Email: lorentedford(a)gmail.com Phone: 618-553-0806 http://www.lorentedford.com http://www.kc9zhv.com http://hub.kc9zhv.com

1 0

VOIP Demonstration at high school -- people needed to link in
by Skyler F 17 Sep '15

17 Sep '15

The STEM (science technology engineering math) school, highlands Ranch, CO. where I set up a repeater will have their first club meeting today. The STEM repeater is based on a Raspberry pi for a controller, for AllStar , and for EchoLink I won't be at the meeting, but will be linked in. The meeting starts at 3:30PM mountain time today (Thursday) The school is really looking for an international contact, but anybody who wants to link in-- feel free to and show off allstar and echolink to kids. CONNECT TO ALLSTAR LINK 40764 - More Bandwidth (50 down 10 up at my house) 41967- Direct to the STEM school repeater (less bandwidth) ECHOLINK KD0WHB-L - MY HOUSE (more bandwidth) AB0BX-R - STEM school repeater (direct to school) Hope to hear stations on the air in a few hours. Try to find people for international contacts !!! Local users - repeater is on a frequency of 447.225 - (141.3) 73 Skyler KDØWHB http://www.qrz.com/db/KD0WHB amsatnet.info -- Skyler Fennell amsatnet.info KDØWHB electricity440(a)gmail.com

1 0

using Zoiper
by Bryan D. Boyle 16 Sep '15

16 Sep '15

has anyone had any experience using Zoiper as an access app to asterisk? i can register, dial extensions, hear traffic, but am (admittedly) stumped as to what the ptt sequence is or should be. just wondering (this is on an iphone, btw). -- Bryan Sent from my iPhone 5...No electrons were harmed in the sending of this message.

4 6

Latest BBB Image
by Willem Schreuder 16 Sep '15

16 Sep '15

I am fixing to convert my node to a BBB or rPi2. I have both so I'm trying to pick the more mature environment. The "Latest News" dated June 10 indicated that V1.3 of the BBB code was in the offing in early July, but the latest image I can find appears to be BBB_Allstar_v1.2.1 and RPi2_V1.0_Allstar Are there a later images I should be using? If not, are there new BBB/rPi2 images coming soon that is worth waiting for? Which of the BBB or rPi2 has the more mature image? 73 -Willem ================================================================ Dr. Willem A. Schreuder, President, Principia Mathematica Address: 445 Union Blvd, Suite 230, Lakewood, CO 80228, USA Tel: (303) 716-3573 Fax: (303) 716-3575 WWW: www.prinmath.com Email: Willem.Schreuder(a)prinmath.com

4 3

Repeater time out custom audio
by Steve Zingman 15 Sep '15

15 Sep '15

Loren, There are 2 files you might be interested in: /var/lib/asterisk/sounds/rpt/timeout.ulaw /var/lib/asterisk/sounds/rpt/timeout-warning.ulaw The names should tell it all. ;)

2 1

Repeater time out custom audio
by Loren Tedford 15 Sep '15

15 Sep '15

Hi I have a custom audio file and have it converted for asterisk but i don't know where to put it for when my repeater system times out.. Anyone have any idea where the location of this should be and what should it be called?? or is their some thing i can point it to that file in the rpt.conf Loren Tedford (KC9ZHV) Email: lorentedford(a)gmail.com Phone: 618-553-0806 http://www.lorentedford.com http://www.kc9zhv.com http://hub.kc9zhv.com

1 0

app_rpt working with Signalink
by Alberto Enrique Puig 15 Sep '15

15 Sep '15

Hi! Has someone on the list used chan_usbradio and app_rpt with Signalink USB by Tigertronic as a radio interface? Regards, KP4AP Alberto 73s

1 0