Ok, so here is the latest.
I discovered that the port # (which I did change earlier) is not updating on
the rpt_extnodes file. It still shows 14569.
On the local node 27976, it does show the correct node port # as registered
in the rpt_extnodes file, so I went ant took another one my nodes and try to
see what it shows and it also shows the wrong port #.
So I think there is something going on with the allstar server.
Unless I am missing something here, I think this might require Jim or an
admin to take a look?
Or does this only update every few hours now? I thought it was like every
15 minutes or so? But I would have thought that upon registration, the file
on the allstar server would update immediately and then all the nodes would
grab the file every 15-30 minutes or so.. If someone could confirm. Thanks
27976=radio(a)63.231.96.56:
<mailto:27976=radio@63.231.96.56:14569/27976,63.231.96.56>
14569/27976,63.231.96.56
Should be: 27976=radio@63.231.96.56:4569/27976,63.231.96.56
<mailto:27976=radio@63.231.96.56:4569/27976,63.231.96.56>
On the affected now, 27976:
asterisk -rx 'iax2 show registry'; ll /var/lib/asterisk
Host dnsmgr Username Perceived Refresh
State
67.215.233.178:4569 N 27976 63.231.96.56:4569 60
Registered
Lu
KA4EPS
