- App_rpt-users - lists.keekles.org

Weirdness in DTMF land...
by Geoff 22 Aug '14

22 Aug '14

Ok, so, we know that female voices are rich and more robust in harmonics that closely resemble DTMF tones. The following log entries during a conversation with the YL prove that. The question is, what combo, in this list, would cause allstar to restart? That's not a function that has been defined in rpt.conf [functions29655] 1=ilink,1 2=ilink,2 3=ilink,3 4=ilink,4 5=macro,1 70=ilink,5 71=ilink,6 72=ilink,7 73=ilink,15 74=ilink,16 75=ilink,8 80=status,1 81=status,12 ;6=autopatchup,noct=1,farenddisconnect=1,dialtime=20000 ; Autopatch up 0=autopatchdn ; Autopatch down ;989=cop,4 980=status,3 99=cop,6 (I now know why I hear a dialtone from time to time, and *that's* been fixed!) [Aug 22 13:28:37] NOTICE[2946] chan_usbradio.c: Got DTMF char 9 duration 20 ms [Aug 22 13:28:38] NOTICE[2946] chan_usbradio.c: Got DTMF char 1 duration 20 ms [Aug 22 13:34:06] NOTICE[2946] chan_usbradio.c: Got DTMF char 1 duration 42 ms [Aug 22 13:34:08] NOTICE[2946] chan_usbradio.c: Got DTMF char 4 duration 21 ms [Aug 22 13:34:09] NOTICE[2946] chan_usbradio.c: Got DTMF char 4 duration 21 ms [Aug 22 13:34:25] NOTICE[2946] chan_usbradio.c: Got DTMF char 2 duration 21 ms [Aug 22 13:34:46] NOTICE[2946] chan_usbradio.c: Got DTMF char 2 duration 21 ms [Aug 22 13:35:43] NOTICE[2946] chan_usbradio.c: Got DTMF char A duration 20 ms [Aug 22 13:35:54] NOTICE[2946] chan_usbradio.c: Got DTMF char 4 duration 20 ms [Aug 22 13:36:49] NOTICE[2946] chan_usbradio.c: Got DTMF char 9 duration 43 ms [Aug 22 13:38:10] NOTICE[2946] chan_usbradio.c: Got DTMF char 5 duration 20 ms [Aug 22 13:38:10] NOTICE[2946] chan_usbradio.c: Got DTMF char 5 duration 20 ms [Aug 22 13:55:05] NOTICE[2946] chan_usbradio.c: Got DTMF char 5 duration 63 ms [Aug 22 13:57:01] NOTICE[2946] chan_usbradio.c: Got DTMF char 5 duration 21 ms [Aug 22 13:57:01] NOTICE[2946] chan_usbradio.c: Got DTMF char 4 duration 21 ms [Aug 22 13:57:02] NOTICE[2946] chan_usbradio.c: Got DTMF char A duration 64 ms [Aug 22 13:57:42] NOTICE[2946] chan_usbradio.c: Got DTMF char 1 duration 20 ms [Aug 22 13:59:11] NOTICE[2946] chan_usbradio.c: Got DTMF char 9 duration 42 ms [Aug 22 13:59:20] NOTICE[2946] chan_usbradio.c: Got DTMF char 4 duration 20 ms [Aug 22 13:59:46] NOTICE[2946] chan_usbradio.c: Got DTMF char 2 duration 23 ms [Aug 22 14:05:11] NOTICE[2946] chan_usbradio.c: Got DTMF char 8 duration 21 ms [Aug 22 14:25:17] NOTICE[2946] chan_usbradio.c: Got DTMF char 8 duration 42 ms [Aug 22 14:25:47] NOTICE[2946] chan_usbradio.c: Got DTMF char 1 duration 20 ms [Aug 22 14:26:33] NOTICE[2946] chan_usbradio.c: Got DTMF char 1 duration 1 ms [Aug 22 14:27:14] NOTICE[2946] chan_usbradio.c: Got DTMF char 1 duration 21 ms [Aug 22 14:29:28] NOTICE[2946] chan_usbradio.c: Got DTMF char 9 duration 19 ms [Aug 22 14:30:15] NOTICE[2946] chan_usbradio.c: Got DTMF char 7 duration 64 ms [Aug 22 15:10:46] WARNING[2931] chan_iax2.c: Max retries exceeded to host 98.197.3.253 on IAX2/98.197.3.253:4569-9780 (type = 7, subclass = 0, ts=46954411, seqno=62) [Aug 22 15:29:39] NOTICE[3828] cdr.c: CDR simple logging enabled. [Aug 22 15:29:39] NOTICE[3828] loader.c: 151 modules will be loaded. [Aug 22 15:29:39] NOTICE[3828] res_smdi.c: Unable to load config smdi.conf: SMDI disabled [Aug 22 15:29:39] WARNING[3828] res_smdi.c: No SMDI interfaces are available to listen on, not starting SMDI listener. [Aug 22 15:29:39] WARNING[3828] res_musiconhold.c: No music on hold classes configured, disabling music on hold. [Aug 22 15:29:39] NOTICE[3828] chan_simpleusb.c: Unable to load config simpleusb.conf [Aug 22 15:29:39] WARNING[3828] cdr_csv.c: unable to load config: cdr.conf [Aug 22 15:29:39] ERROR[3828] chan_voter.c: Unable to load config voter.conf [Aug 22 15:29:39] NOTICE[3828] app_radbridge.c: Unable to open radio bridging configuration rpt.conf. Radio Bridging disabled. [Aug 22 15:29:39] WARNING[3828] chan_beagle.c: chan_beagle declining module load since WE ARE NOT A BEAGLEBOARD!! [Aug 22 15:29:39] NOTICE[3828] chan_agent.c: No agent configuration found -- agent support disabled [Aug 22 15:29:39] WARNING[3828] app_followme.c: No follow me config file (followme.conf), so no follow me [Aug 22 15:29:39] ERROR[3828] codec_dahdi.c: Failed to open /dev/zap/transcode: No such file or directory [Aug 22 15:29:39] WARNING[3828] acl.c: is not a valid IP [Aug 22 15:29:39] NOTICE[3828] chan_iax2.c: The option 'notransfer' is deprecated in favor of 'transfer' which has options 'yes', 'no', and 'mediaonly' [Aug 22 15:29:39] NOTICE[3828] chan_iax2.c: The option 'notransfer' is deprecated in favor of 'transfer' which has options 'yes', 'no', and 'mediaonly' [Aug 22 15:29:39] NOTICE[3828] chan_iax2.c: The option 'notransfer' is deprecated in favor of 'transfer' which has options 'yes', 'no', and 'mediaonly' [Aug 22 15:29:39] NOTICE[3828] chan_iax2.c: The option 'notransfer' is deprecated in favor of 'transfer' which has options 'yes', 'no', and 'mediaonly' [Aug 22 15:29:39] NOTICE[3828] chan_iax2.c: The option 'notransfer' is deprecated in favor of 'transfer' which has options 'yes', 'no', and 'mediaonly' [Aug 22 15:29:39] NOTICE[3828] chan_iax2.c: The option 'notransfer' is deprecated in favor of 'transfer' which has options 'yes', 'no', and 'mediaonly' [Aug 22 15:29:39] NOTICE[3828] chan_iax2.c: The option 'notransfer' is deprecated in favor of 'transfer' which has options 'yes', 'no', and 'mediaonly' [Aug 22 15:29:39] NOTICE[3828] chan_iax2.c: The option 'notransfer' is deprecated in favor of 'transfer' which has options 'yes', 'no', and 'mediaonly' [Aug 22 15:29:39] NOTICE[3828] chan_iax2.c: The option 'notransfer' is deprecated in favor of 'transfer' which has options 'yes', 'no', and 'mediaonly' [Aug 22 15:29:39] NOTICE[3828] chan_skinny.c: Unable to load config skinny.conf, Skinny disabled [Aug 22 15:29:39] WARNING[3828] app_voicemail.c: Failed to load configuration file. [Aug 22 15:29:39] ERROR[3828] chan_tlb.c: Unable to load config tlb.conf [Aug 22 15:29:39] NOTICE[3828] app_gps.c: Unable to load config gps.conf [Aug 22 15:29:39] WARNING[3828] cdr_custom.c: Failed to load configuration file. Module not activated. [Aug 22 15:29:39] NOTICE[3828] chan_mgcp.c: Unable to load config mgcp.conf, MGCP disabled [Aug 22 15:29:39] WARNING[3828] app_festival.c: No such configuration file festival.conf [Aug 22 15:29:39] NOTICE[3828] app_queue.c: No call queueing config file (queues.conf), so no call queues [Aug 22 15:29:39] NOTICE[3828] pbx_ael.c: Starting AEL load process. [Aug 22 15:29:39] NOTICE[3828] pbx_ael.c: AEL load process: calculated config file name '/etc/asterisk/extensions.ael'. [Aug 22 15:29:39] NOTICE[3828] pbx_ael.c: File /etc/asterisk/extensions.ael not found; AEL declining load [Aug 22 15:29:39] NOTICE[3839] app_rpt.c: Normal Repeater Init 29655 [Aug 22 15:29:39] NOTICE[3839] app_rpt.c: Normal Repeater Init 29656 [Aug 22 15:29:39] NOTICE[3839] app_rpt.c: Normal Repeater Init 29657 [Aug 22 15:29:39] WARNING[3861] chan_usbradio.c: Loaded parameters from usbradio_tune_usb29655.conf for device usb29655 . [Aug 22 15:29:39] WARNING[3862] chan_usbradio.c: Loaded parameters from usbradio_tune_usb29657.conf for device usb29657 .

2 2

Help ERROR after power failure and reboot..
by Bradley Haney 22 Aug '14

22 Aug '14

n devstr=6-2 devnum=2 [Aug 22 21:13:55] ERROR[2126]: chan_urd.c:2396 urd_link: [usb] Not able to detach the USB device [Aug 22 21:13:55] ERROR[2126]: chan_urd.c:2467 urd_link: [usb] unable to assign devstr=6-1 devnum=1 Seems I have an issue any ideas on how to get the URI to work with the computer again?

1 0

pfsense router?
by Tim Sawyer 22 Aug '14

22 Aug '14

Is anyone using a pfsense router in your Asterisk network? While app_rpt seems to work fine it shows a weird port, not 4569, with “iax2 show registry”. I assume pfsense is doing something weird with NAT that I don’t understand. Can anyone shed some light on this subject? -- Tim WD6AWP

4 7

Re: [App_rpt-users] 2 Repeaters on One system
by mike＠midnighteng.com 22 Aug '14

22 Aug '14

1 0

2 Repeaters on One system
by Loren Tedford 22 Aug '14

22 Aug '14

Hello Loren here I am looking at trying to run two separate repeaters on one system was curious how I should do this or what examples of the config files should look like one concern of mine is Echolink I already use Echolink on my 440 repeater however if I put in a 2 Meter repeater I would like to have the echo-link made available to the 2 meter repeater as well.. We all know that Echolink uses ports 5198-5200 So how does one do this when there is a two repeaters on the same computer system or Allstar system.. Also how do I edit the config files for each repeater and ensure that the URI attaches its self to the correct config file so many questions go through my mind as I look at running all this on one machine.. Broadcastify is another question how do I run multiple instance of Ezstream on the same system and broadcast my both repeaters out to the web.. I have the 440 repeater at moment doing this but we have also experienced issues restarting Asterisk and other things with Ezstream any thoughts? Any advise out there would be appreciated. Loren Tedford (KC9ZHV) Email: lorentedford(a)gmail.com http://www.lorentedford.com http://kc9zhv.lorentedford.com

1 0

Mini ITX Choice
by Tim Sawyer 21 Aug '14

21 Aug '14

I’m looking for a good mini ITX solution for Asterisk/app_rpt. I had been using Intel D525 CPU/motherboard but those are getting hard to find. What’s a good motherboard/CPU combo for Linux these days? -- Tim :wq

9 10

Re: [App_rpt-users] App_rpt-users Digest, Vol 66, Issue 51
by Bryan Fields 20 Aug '14

20 Aug '14

I feel bad for even starting the thread now. I only wanted to help out. On 8/20/14, 3:02 PM, Mark Guibord wrote: > This is unbelievable... Jim has every right to enforce the policies and > operating procedures of the AllStar system. After all he wrote most of the > software we are using for free. Goodbye Steve!!! > > -----Original Message----- > From: app_rpt-users-bounces(a)ohnosec.org > [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Steve Wright > Sent: Wednesday, August 20, 2014 10:18 AM > To: app_rpt-users(a)ohnosec.org > Subject: Re: [App_rpt-users] App_rpt-users Digest, Vol 66, Issue 51 > > > On 21/08/14 05:02, app_rpt-users-request(a)ohnosec.org wrote: >> From: telesistant(a)hotmail.com >> To: doug(a)crompton.com; app_rpt-users(a)ohnosec.org >> Subject: RE: [App_rpt-users] Web transceiver node display >> Date: Wed, 20 Aug 2014 06:25:21 -0700 >> >> Where do you get off making such a statement? You are in no position to do > so. >> In fact what you are doing here is endorsing activity OFFICIALLY >> AGAINST Allstar system policy, which absolutely will NOT BE TOLERATED >> IN ANY WAY SHAPE OR FORM!!! > Grow the fuck up. What other people do is not your business, and you are > not in a position to publicly shoot your ugly mouth off at them. > > People, including YOU will arbitrarily do freely as they choose, and you > will not attack them. > > Suck it up. > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to > the bottom of the page. Enter your email address and press the "Unsubscribe > or edit options button" > You do not need a password to unsubscribe, you can do it via email > confirmation. If you have trouble unsubscribing, please send a message to > the list detailing the problem. > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. -- Bryan Fields 727-409-1194 - Voice 727-214-2508 - Fax http://bryanfields.net

1 0

Re: [App_rpt-users] App_rpt-users Digest, Vol 66, Issue 51
by Mark Guibord 20 Aug '14

20 Aug '14

This is unbelievable... Jim has every right to enforce the policies and operating procedures of the AllStar system. After all he wrote most of the software we are using for free. Goodbye Steve!!! -----Original Message----- From: app_rpt-users-bounces(a)ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Steve Wright Sent: Wednesday, August 20, 2014 10:18 AM To: app_rpt-users(a)ohnosec.org Subject: Re: [App_rpt-users] App_rpt-users Digest, Vol 66, Issue 51 On 21/08/14 05:02, app_rpt-users-request(a)ohnosec.org wrote: > From: telesistant(a)hotmail.com > To: doug(a)crompton.com; app_rpt-users(a)ohnosec.org > Subject: RE: [App_rpt-users] Web transceiver node display > Date: Wed, 20 Aug 2014 06:25:21 -0700 > > Where do you get off making such a statement? You are in no position to do so. > In fact what you are doing here is endorsing activity OFFICIALLY > AGAINST Allstar system policy, which absolutely will NOT BE TOLERATED > IN ANY WAY SHAPE OR FORM!!! Grow the fuck up. What other people do is not your business, and you are not in a position to publicly shoot your ugly mouth off at them. People, including YOU will arbitrarily do freely as they choose, and you will not attack them. Suck it up. _______________________________________________ App_rpt-users mailing list App_rpt-users(a)ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

2 1

Re: [App_rpt-users] Web transceiver node display
by mike＠midnighteng.com 20 Aug '14

20 Aug '14

5 7

Web transceiver node display
by Doug Crompton 20 Aug '14

20 Aug '14

I have a hub that has a number of 4xxxx Allstar nodes connected and I keep getting inquiries about why there are IRLP nodes showing on the web transceiver. They obviously are not IRLP nodes but instead the 4xxxx nodes with the leading 4 not displayed. Apparently this was never changed on the web transceiver when the 40K nodes were added. Can this be fixed? This works correctly in my lsnodes script as I updated it when the node sequence changed. 73 Doug WA3DSP http://www.crompton.com/hamradio

4 6