- App_rpt-users - lists.keekles.org

Re: [App_rpt-users] RTCM with Com-spec TS-64 PL decoder
by Bryan Fields 02 Apr '14

02 Apr '14

On 4/1/14, 12:50 PM, Jeff DePolo wrote: > Did you ground the hang-up line on the TS-64? > > And have you measured the voltage on the logic line to see if it's changing > when PL is or isn't present? Yep, that was it. I feel stupid now :( Thanks! -- Bryan Fields 727-409-1194 - Voice 727-214-2508 - Fax http://bryanfields.net

1 0

RTCM with Com-spec TS-64 PL decoder
by Bryan Fields 01 Apr '14

01 Apr '14

I'm trying to get this working and can confirm I have the white audio mute wire connected to the RTCM PL logic line. No matter if I toggle it normal or inverted it does not work. Has anyone interfaced with this before? Other than this it's working :) -- Bryan Fields 727-409-1194 - Voice 727-214-2508 - Fax http://bryanfields.net

2 1

Re: [App_rpt-users] App_rpt-users Digest, Vol 62, Issue 1
by george＠dyb.com 01 Apr '14

01 Apr '14

Not sure how I got it to work. I requested the remote setup from the radio server setup (nodeconfig) and after one more failed attempt to push the config from the web site it did and does work. When stuff works I don't axe too many questions. GeorgeC > > 1. Sorry, your server does not have any downloadable nodes > (Register Only). (George Csahanin) > > > > OK folks, the one time I really wanted to setup a node from the web > tool I got the above error message. Fresh pickle download. I can find > nothing wrong. > > Can someone point me in the right direction? > > Thanks > > GeorgeC > 2360 > > This one will be 28599 and 2428 > > George J Csahanin > W2DB > Cedar Park, TX > 512-401-2630 home > 401-338-0568 cel > _______________________________________________

1 0

Sorry, your server does not have any downloadable nodes (Register Only).
by George Csahanin 31 Mar '14

31 Mar '14

OK folks, the one time I really wanted to setup a node from the web tool I got the above error message. Fresh pickle download. I can find nothing wrong. Can someone point me in the right direction? Thanks GeorgeC 2360 This one will be 28599 and 2428 George J Csahanin W2DB Cedar Park, TX 512-401-2630 home 401-338-0568 cel

1 0

Allstar running on Ubuntu Saucy
by Doug Crompton 28 Mar '14

28 Mar '14

As an experiment I have compiled Allstar on Ubuntu Saucy 13.10 (the latest version) and it is working well. It required a recompile of the kernel as Ubuntu took out OSS support in their releases several years ago. I did try to use some of the OSS emulators like osspd or aoss but was not successful. Perhaps if someone wanted to play with that they might be able to get it to work. osspd does create /dev/dsp but app_rpt balks at not finding things. Anyhow from this experiment it appears that just about any popular flavor of Linux could be made to work with the existing acid release and dahdi as long as you were willing to recompile the kernel. The code is there just not configured in. The key is the snd-pcm-oss module. Ubuntu has a paticularly easy kernel recompile procedure. It takes all of about three command to do it but a considerable amount of time to compile. I think my choice for a standard though might be Debian which at least to this point configures in the OSS support in its releases. Probably the latest centos went the same way as ubuntu and configured it out. It might be worth a try to see if recompiling the kernel with oss support selected would solve the problem of it not working. You also have to make sure the snd_pcm_oss module is loading at boot. In Ubuntu it did, for my Debian compile I had to add it to /etc/modules. The key is to check for the existence of /dev/dsp and /dev/mixer. If they are there it probably will work if not it isn't going to work. https://wiki.ubuntu.com/Kernel/BuildYourOwnKernel Beagle Blacks are back in stock and I have one on order. I should know in a week or two whether it is going to work. 73 Doug WA3DSP http://www.crompton.com/hamradio

1 0

Re: [App_rpt-users] toggling power on USB buss
by Geoff Edmonson 27 Mar '14

27 Mar '14

Well, it happened again, this morning. Both URI's on same usb buss, but this time it was the UHF repeater URI that failed. Previously, it was the vhf simplex node that was 'sensitive'. Shutting down and restarting asstorisk doesn't do it, but ¥> shutdown -r now does. ~shrug~

4 3

Re: [App_rpt-users] toggling power on USB buss
by mike＠midnighteng.com 27 Mar '14

27 Mar '14

1 0

Re: [App_rpt-users] App_rpt-users Digest, Vol 61, Issue 57
by Steve Wright 27 Mar '14

27 Mar '14

> > Well, it happened again, this morning. > Both URI's on same usb buss, but this time it was the UHF repeater URI that failed. Previously, it was the vhf simplex node that was 'sensitive'. > > Shutting down and restarting asstorisk doesn't do it, but Hehe, interesting isn't it.. - how it's beaten into us that this cheapo consumer-junk USB interface is better and more reliable than onboard sound devices. When have you ever seen an onboard sound device vanish?

1 0

Re: [App_rpt-users] toggling power on USB buss
by Geoff Edmonson 27 Mar '14

27 Mar '14

Just the 2 URI's... Only USB devices on the machine "Robert A. Poff WB3AWJ" <wb3awj(a)comcast.net> wrote: >_______________________________________________ >App_rpt-users mailing list >App_rpt-users(a)ohnosec.org >http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > >To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" >You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

5 7

toggling power on USB buss
by Geoff 26 Mar '14

26 Mar '14

I'm seeing info here and there on whether power cycling a USB device (without shutting down the whole system) is possible or not. On occasion, I have the need to physically walk into the repeater room and check to see if the lights are blinking on the URIx's, because sometimes they -stop-. (Damnit, Jim - I a radio operator, not a URIx heartbeat cardiologist ;->). My quick and dirty thought would be to find a way to discover, via software, whether or not a specific URIx had a green-blinking light and if not, power-cycle that usb device. Anyone have an idea on this? -Geoff/W5OMR 29655

5 6