- App_rpt-users - lists.keekles.org

[App rpt-users] Problems update for Echolink
by Douglas Waugh 01 Feb '14

01 Feb '14

I have come up with a problem getting Echolink to see what I am connected to. The Echolink program can update the listing by doing this: Is your node not showing? You can control this in EchoLink. Go to Tools >> Preferences >> Connections and check the box "Update Location entry with status". How can we get Echolink.conf to do this for us?

2 1

Re: [App_rpt-users] App_rpt-users Digest, Vol 60, Issue 3
by Steve Wright 01 Feb '14

01 Feb '14

> > I think what he is asking is whether the weather the Rx and Tx streams > of the RTCM can be used on different nodes. In other words, at a > specific site with only a single RTCM, can the transmitter be part of > node A while the receiver is part of node B. Concisely; Two repeaters, a 6m repeater and a 2m repeater. Two repeater sites; Site "A" has 6m TX and 2m RX. Site "B" has 6m RX and 2m TX. *One* RTCM at each site. chan_voter will have to have it explained in excruciating detail. Call me cheap - two RTCM is cheaper than four RTCM, and duplexing 6/2 is a lot less complex than duplexing 6/6 and 2/2. ;) Steve > Looking at his message > again that may not actually be what he is looking for, though. > > Steve, as long as there is only one Asterisk node involved, meaning a > single repeater "system" although using multiple bands, a single RTCM > at a site will work. If configured this way all the 6m and 2m > receivers would link back and be voted into a single stream which > would then be sent out to all the 6m and 2m transmitters at the > different sites. When used like this as far as app_rpt is concerned it > behaves no differently than having a voted/simulcast system on a > single band. > > Brett KQ9N > > On Sat, Feb 1, 2014 at 6:20 PM, Tim Sawyer <tim.sawyer(a)mac.com> wrote: > > Of course each RTCM can transmit and receive. The receive only sites > don't have the transmit parameter in voter.conf. But you seem to be asking > a different question. If so, could you restate it? > > -- > > Tim > > :wq > > > > On Feb 1, 2014, at 10:23 AM, Steve Wright <stevewrightnz(a)gmail.com> > wrote: > > > >> Gurus! > >> > >> Can I operate arbitrary recievers and transmitters with the voter > boards, and separate them in config at chan_voter? > >> > >> Background: Our terrain does not lend itself to a few high-sited > duplexed repeaters (or rather we are not inclined to pay for it), so we are > taking the non-duplexed distributed approach of locating recievers and > transmitters at various sites on a non-contending basis and GPS locking > them all together. It seems to us that if we have a hole in some coverage, > that it would easy (read - cheap) to throw another GM300 at the problem.. > >> > >> That is, site A has either a 6M transmitter and other 2M receiver, or > otherwise non-contending combinations, and the corresponding pair for each > repeater receiver or transmitter is actually located on a nearby site > linked with 802.11an. > >> > >> SO! It looks at first glance that I must use a VOTER board for each rx > AND each tx, but perhaps I can use some clever config and halve the number > of VOTER boards I use. > >> > >> > >> Many thanks, > >> Steve > >> > >> > >> -- > >> Meshnetworks - Rangitaiki Plains Rural Broadband Internet Providers > >> +64 21 040 5067 > >> _______________________________________________ > >> App_rpt-users mailing list > >> App_rpt-users(a)ohnosec.org > >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > >> > >> To unsubscribe from this list please visit > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down > to the bottom of the page. Enter your email address and press the > "Unsubscribe or edit options button" > >> You do not need a password to unsubscribe, you can do it via email > confirmation. If you have trouble unsubscribing, please send a message to > the list detailing the problem. > > > > _______________________________________________ > > App_rpt-users mailing list > > App_rpt-users(a)ohnosec.org > > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > > > To unsubscribe from this list please visit > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down > to the bottom of the page. Enter your email address and press the > "Unsubscribe or edit options button" > > You do not need a password to unsubscribe, you can do it via email > confirmation. If you have trouble unsubscribing, please send a message to > the list detailing the problem. > > > ------------------------------ > > Message: 6 > Date: Sat, 1 Feb 2014 21:54:41 -0500 > From: Lu Vencl <vencl(a)att.net> > To: "<app_rpt-users(a)ohnosec.org>" <app_rpt-users(a)ohnosec.org> > Subject: [App_rpt-users] MSF 5000 URI interface > Message-ID: <D9035249-1E4C-4EF8-AB58-75B4784784B4(a)att.net> > Content-Type: text/plain; charset=us-ascii > > Anyone have the diagram for URI interface to an MSF 5000? > > Sent from my iPhone, Lu Vencl > > > ------------------------------ > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > > End of App_rpt-users Digest, Vol 60, Issue 3 > ******************************************** > -- Meshnetworks - Rangitaiki Plains Rural Broadband Internet Providers +64 21 040 5067

2 1

DMR to Analog/app-rpt
by K1IF 31 Jan '14

31 Jan '14

Travis KJ4NDP has successfully connected his DMR radio to asterisk by utilizing the dstar channel driver in asterisk created by Scott Lawson ki4lkf. --- This email is free from viruses and malware because avast! Antivirus protection is active. http://www.avast.com

3 2

DMR to Analog/app-rpt
by Bryan D. Boyle 31 Jan '14

31 Jan '14

beginning, with the growing interest in the DMR/trbo usage...to investigate integrating the two technologies. Connect Systems is starting to bring in DMR cable DMR/analog HTs for not a lot more than a wouxun...and, yes, know about the DMR-MARC group. But, my question...is anyone in the band investigating navigating the DMR to Asterisk chasm yet? PM is probably preferable than broadcast, unless there is interest on the part of the tribe....or I've missed something along the way... -- Bryan There are two hard problems in computer science: cache validation, variable substitution, and off-by-one errors. Sent from my iPad

5 5

Help getting started with RTCM and ACID
by Chris Bunting 30 Jan '14

30 Jan '14

I have 2 RTCM boxes configured, and an ACID install. I figured out I needed to create a voter.conf file, and it is as follows: [general] port = 667 password = @@@@@@ [28989] NORTH = @@@@@,transmit SOUTH = @@@@@,master,transmit (@ being my passwords) Do I need to change anything in the rpt.conf file? I read something about 1 line needing modified? Also, I am on a LAN and the server has a static IP, can I simply enter the IP in the FQDN field on the RTCM or must it be a FQDN that resolves? I tried both, and Ithink I'm doing everything right, but I can't get the darn box to connect to my server... After I get this connected it's time to break out the soldering iron and hook this all up to my 2 repeaters for my simulcast project... fun fun! Any hints/tips? TIA Chris N3FYI

2 4

Creating a Private Network
by Tim Sawyer 30 Jan '14

30 Jan '14

Creating a private network is actually pretty easy. What you do is add the node and IP address of the other node(s) to each server’s rpt.conf in the [nodes] stanza. Here’s an example with two private nodes. Server A’ s IP is 192.168.1.10 and B is 192.168.1.11. SERVER A rpt.conf [nodes] 1000 = radio(a)127.0.0.1/1000,NONE ; Local node 1001 = radio(a)192.168.1.11/1001,NONE ; Remote node SERVER B rpt.conf [nodes] 1001 = radio(a)127.0.0.1/1001,NONE ; Local node 1000 = radio(a)192.168.1.10/1000,NONE ; Remote node Of course you need to have all the normal stuff that nodes have in rpt.conf and extensions.conf. Private nodes do not need a register line in iax.conf. -- Tim :wq On Jan 30, 2014, at 3:51 AM, Lu Vencl <vencl(a)att.net> wrote: > Tim. Do you know how to connect one node to another via direct ip connect? In other words to a node that is not on the public network but private? > > Sent from my iPhone, Lu Vencl -- Tim :wq

1 0

lsnodes 1.03
by Doug Crompton 30 Jan '14

30 Jan '14

I fixed a bug in the display of Echolink nodes. All Echolink nodes should now display as ECHOLINK with call if data is available. http://crompton.com/hamradio/allstar/lsnodes.html wget http://www.crompton.com/hamradio/allstar/lsnodes-1.03.tgz 73 Doug WA3DSP http://www.crompton.com/hamradio

1 0

Re: [App_rpt-users] lsnodes
by Douglas Waugh 29 Jan '14

29 Jan '14

You could connect to my node 27553, I am usually connected to *TACOMA* From: Doug Crompton Sent: Wednesday, January 29, 2014 9:23 AM To: Douglas Waugh Subject: RE: [App_rpt-users] lsnodes Doug, Did you get my previous email? 73 Doug WA3DSP http://www.crompton.com/hamradio -------------------------------------------------------------------------------- From: doug(a)crompton.com To: waughdj(a)msn.com Subject: RE: [App_rpt-users] lsnodes Date: Tue, 28 Jan 2014 12:19:21 -0500 Doug, You are right. My check was for node numbers > 100000 but I failed to look for leading 0's. Looking at the list I would say that 95%+ of the nodes are truly 100,000 or above. I think I have nade a change that will correct that but I want to test it. Do you have an Allstar node I can connect to where echolink nodes that fit the leading 0 and less than 100000 number are connected 73 Doug WA3DSP http://www.crompton.com/hamradio -------------------------------------------------------------------------------- From: waughdj(a)msn.com To: app_rpt-users(a)ohnosec.org Date: Tue, 28 Jan 2014 01:48:33 -0600 Subject: [App_rpt-users] lsnodes Doug, I noticed one thing that happens when Echolink nodes are listed. If you have zero’s in front of the node numbers they don’t register the calls. It says No info. Is there any way that the zero’s can be omitted from the text for them to show the right callsigns.. Examples are 007059 and 057275. Thanks ahead of time. KC0EQA, Doug _______________________________________________ App_rpt-users mailing list App_rpt-users(a)ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

1 0

Re: [App_rpt-users] lsnodes
by Douglas Waugh 29 Jan '14

29 Jan '14

From: Doug Crompton Sent: Wednesday, January 29, 2014 9:23 AM To: Douglas Waugh Subject: RE: [App_rpt-users] lsnodes Doug, Did you get my previous email? 73 Doug WA3DSP http://www.crompton.com/hamradio -------------------------------------------------------------------------------- From: doug(a)crompton.com To: waughdj(a)msn.com Subject: RE: [App_rpt-users] lsnodes Date: Tue, 28 Jan 2014 12:19:21 -0500 Doug, You are right. My check was for node numbers > 100000 but I failed to look for leading 0's. Looking at the list I would say that 95%+ of the nodes are truly 100,000 or above. I think I have nade a change that will correct that but I want to test it. Do you have an Allstar node I can connect to where echolink nodes that fit the leading 0 and less than 100000 number are connected 73 Doug WA3DSP http://www.crompton.com/hamradio -------------------------------------------------------------------------------- From: waughdj(a)msn.com To: app_rpt-users(a)ohnosec.org Date: Tue, 28 Jan 2014 01:48:33 -0600 Subject: [App_rpt-users] lsnodes Doug, I noticed one thing that happens when Echolink nodes are listed. If you have zero’s in front of the node numbers they don’t register the calls. It says No info. Is there any way that the zero’s can be omitted from the text for them to show the right callsigns.. Examples are 007059 and 057275. Thanks ahead of time. KC0EQA, Doug _______________________________________________ App_rpt-users mailing list App_rpt-users(a)ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

1 0

Node not in database
by Ken Robinson 29 Jan '14

29 Jan '14

Hi, After a pc failure I have had to reinstall Acid, it works ok, my node loads and works perfectly locally but it will not access the AllStar network. All I get is node 28468 is no longer in the database. Can anyone tell me where I have gone wrong? If I log on to the Allstar site and attempt a download configuration I get "sorry your server does not have any downloadable nodes (register only)" Hopefully someone can point me in the right direction Regards Ken G0LCE

2 1