- App_rpt-users - lists.keekles.org

Raspberry Pi Kernel and Firmware Versions?
by Rachel Olivero 14 Sep '18

14 Sep '18

Hi all: Someone, and I won't name names, but let's call her Evil Rachel, was trying to solve a problem with rigctl and foolishly upgraded the kernel, kernel headers, and firmware on the Rpi 3 running her node. I think I fixed dahdi, but now I'm getting an error that chan_simpleusb cannot re- open the dsp device, and /dev/dsp does not exist. I'm hopeful downgrading, or some other solution you lovely folks may provide, will fix things. Or, is my best bet just to reimage the card? Thanks, and 73, Rachel AD9O

3 3

NODE 48455 not showing int the Database at stats.allstarlink.org
by José Roberto Ruíz García Salas TG9AOR 13 Sep '18

13 Sep '18

I wanted to integrate a private node to my current, working setup. I stopped the services, edited accordingly the rpt, extensions, and modules conf files. I restarted the services, I am no longer in the list. I can connect to node 48270, and I am shown under current logins under echolink. I ran iax2 show registry, output below. Linux repeater 4.9.80-v7+ #1098 SMP Fri Mar 9 19:11:42 GMT 2018 armv7l The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. Last login: Thu Sep 13 11:36:36 2018 from 10.0.0.6 repeater@repeater:~ $ sudo asterisk -c AllStarLink Asterisk Version 1.01 2/13/2018 GIT Version adaec47 Copyright (C) 1999 - 2018 Digium, Inc. Jim Dixon, AllStarLink Inc. and others. Created by Mark Spencer <markster(a)digium.com> Asterisk comes with ABSOLUTELY NO WARRANTY; type 'core show warranty' for details. This is free software, with components licensed under the GNU General Public License version 2 and other licenses; you are welcome to redistribute it under certain conditions. Type 'core show license' for details. ========================================================================= [ Booting... [ Reading Master Configuration ] [ Initializing Custom Configuration Options ] [Sep 13 12:02:24] NOTICE[1627]: dnsmgr.c:394 do_reload: Managed DNS entries will be refreshed every 300 seconds. [Sep 13 12:02:24] NOTICE[1627]: cdr.c:1416 do_reload: CDR simple logging enabled. [Sep 13 12:02:24] NOTICE[1627]: loader.c:874 load_modules: 57 modules will be loaded. ......................................................... ] Asterisk Ready. *CLI> [Sep 13 12:02:25] NOTICE[1633]: app_rpt.c:22184 rpt_master: Normal Repeater Init 48455 [Sep 13 12:02:25] NOTICE[1633]: app_rpt.c:22184 rpt_master: Normal Repeater Init 70421 iax2 show registry Host dnsmgr Username Perceived Refresh State 44.98.254.145:4569 Y 48455 190.148.222.28:4569 60 Registered *CLI> What happened? Thanks. José Roberto Ruíz García Salas TG9AOR

2 1

Way to disable registration via dtmf then enable when needed?
by Loren Tedford 13 Sep '18

13 Sep '18

Hello!! So sorry for no updates on my prior posts! You all have been extremely helpful and i have been able to resolve my port issues along with some other odd things i had missed in my rpt.conf files at the repeater site.. However here is my problem I have 10 gigs to work with month after month at the repeater site and I made the mistake after putting the system back online by using ulaw and it ate about 1 gig a day in data alone including the vpn traffic.. Now i have the system up and at the moment i am eating about 50mb a day with registration turned on to allstarlink however i was wondering if there is a way to disable registration or possibly fake back end to another node on my web server which then in turn would handle the data via pass through dtmf of some sort when needing to connect to a node via rf on either repeater. In the past on gsm i typically only use about 8 gigs a month of data however after coming close to going over my data plans at the site 400 mb left till tomorrow i am wondering what other steps i can do when things get crazy but yet still leave my vpn in place if possible.. Also i did notice that my system went into a constant loop after boot up because the vpn hadn't connected i would like to solve this issue as well not sure what is causing it and i know its not a typical setup. We are located in an area where internet is very difficult and using 4glte with external antennas to bring internet into our two repeaters here in Olney.

3 2

Allmon2 /Supermon x.x Sources?
by Jim Aspinwall No1PC 13 Sep '18

13 Sep '18

I'm perplexed/challenged to locate install-able, agnostic sources for either Allmon2 and/or SuperMon x.yy.zzz.... preferring the latter. How/where does one acquire and apply working code for either/both?

2 1

Trouble with minicom on new install
by TGundo 2003 12 Sep '18

12 Sep '18

Morning all- Just did a fresh install, upgraded to a new Pi. Everything went very smooth, copied over my config files and everything started working as it should. One issue though- I am trying to put Minicom back on and I get this: root@repeater:~# apt-get install minicomReading package lists... DoneBuilding dependency treeReading state information... DoneE: Unable to locate package minicomroot@repeater:~# Any ideas? I am running this as root. Thanks!TomW9SRV

3 4

AP2CJ Node 48092 no longer in DB
by Shehzad Hamid 12 Sep '18

12 Sep '18

Greetings, A little background, ive installed ASL on intel Atom with the modified usb FOB cm108 and an HT for RF on 144MHz, have echolink enabled and all connections from echolink and allstar in and out establish perfectly, configured the port forwarding on the router and all worked well. The bigger plan is to putup at least 3 nodes in Pakistan linking 3 city coverage repeaters together in future while having the facility of world being connected to us or vise versa :D. The issue in subject line has been posted many times before and I have gone through almost all of them for the past 3+ days now but to no avail. The node does not show up in the online nodes list nor on http://status.allstarlink.org/nodeinfo.cgi?node=48092 where as it does showup green in system-wide node list, the iax2 show registry shows allstarlink1*CLI> iax2 show registry Host dnsmgr Username Perceived Refresh State 67.215.233.178:4569 Y 48092 39.50.88.107:10880 60 Registered have checked all possible network settings and no change from the first day it went online. repeater@allstarlink1:~$ sudo cat /tmp/rpt_extnodes-temp | grep 48092 48092=radio@39.50.88.107:4569/48092,39.50.88.107 repeater@allstarlink1:~$ sudo grep 48092 /var/lib/asterisk/rpt_extnodes 48092=radio@39.50.88.107:4569/48092,39.50.88.107 ran tcpdump on the allstarnode and I can see the packets being sent and acknowledged (below). 14:22:47.299321 IP 192.168.1.5.35422 > stats.allstarlink.org.http: Flags [S], seq 1388935083, win 29200, options [mss 1460,sackOK,TS val 1223790 ecr 0,nop,wscale 7], length 0 14:22:47.303605 IP 192.168.1.5.35424 > stats.allstarlink.org.http: Flags [S], seq 2416777296, win 29200, options [mss 1460,sackOK,TS val 1223791 ecr 0,nop,wscale 7], length 0 14:22:47.625331 IP stats.allstarlink.org.http > 192.168.1.5.35422: Flags [S.], seq 953265040, ack 1388935084, win 28960, options [mss 1452,sackOK,TS val 914084267 ecr 1223790,nop,wscale 7], length 0 14:22:47.625451 IP 192.168.1.5.35422 > stats.allstarlink.org.http: Flags [.], ack 1, win 229, options [nop,nop,TS val 1223872 ecr 914084267], length 0 14:22:47.625642 IP 192.168.1.5.35422 > stats.allstarlink.org.http: Flags [P.], seq 1:316, ack 1, win 229, options [nop,nop,TS val 1223872 ecr 914084267], length 315: HTTP: GET /uhandler.php?node=48092&time=1529313767&seqno=107&nodes=&apprptvers=0.327&apprptuptime=1875&totalkerchunks=0&totalkeyups=5&totaltxtime=33&timeouts=0&totalexecdcommands=1 HTTP/1.1 14:22:47.632208 IP stats.allstarlink.org.http > 192.168.1.5.35424: Flags [S.], seq 1293069211, ack 2416777297, win 28960, options [mss 1452,sackOK,TS val 914084267 ecr 1223791,nop,wscale 7], length 0 14:22:47.632359 IP 192.168.1.5.35424 > stats.allstarlink.org.http: Flags [.], ack 1, win 229, options [nop,nop,TS val 1223873 ecr 914084267], length 0 14:22:47.632735 IP 192.168.1.5.35424 > stats.allstarlink.org.http: Flags [P.], seq 1:217, ack 1, win 229, options [nop,nop,TS val 1223873 ecr 914084267], length 216: HTTP: GET /uhandler.php?node=48092&time=1529313767&seqno=108&keyed=0&keytime=1885 HTTP/1.1 14:22:47.953808 IP stats.allstarlink.org.http > 192.168.1.5.35422: Flags [.], ack 316, win 235, options [nop,nop,TS val 914084349 ecr 1223872], length 0 14:22:47.958200 IP stats.allstarlink.org.http > 192.168.1.5.35422: Flags [P.], seq 1:208, ack 316, win 235, options [nop,nop,TS val 914084350 ecr 1223872], length 207: HTTP: HTTP/1.1 200 OK 14:22:47.958288 IP 192.168.1.5.35422 > stats.allstarlink.org.http: Flags [.], ack 208, win 237, options [nop,nop,TS val 1223955 ecr 914084350], length 0 14:22:47.960295 IP 192.168.1.5.35422 > stats.allstarlink.org.http: Flags [F.], seq 316, ack 208, win 237, options [nop,nop,TS val 1223955 ecr 914084350], length 0 14:22:47.962823 IP stats.allstarlink.org.http > 192.168.1.5.35424: Flags [.], ack 217, win 235, options [nop,nop,TS val 914084350 ecr 1223873], length 0 14:22:47.966204 IP stats.allstarlink.org.http > 192.168.1.5.35424: Flags [P.], seq 1:208, ack 217, win 235, options [nop,nop,TS val 914084351 ecr 1223873], length 207: HTTP: HTTP/1.1 200 OK 14:22:47.966263 IP 192.168.1.5.35424 > stats.allstarlink.org.http: Flags [.], ack 208, win 237, options [nop,nop,TS val 1223957 ecr 914084351], length 0 14:22:47.968871 IP 192.168.1.5.35424 > stats.allstarlink.org.http: Flags [F.], seq 217, ack 208, win 237, options [nop,nop,TS val 1223957 ecr 914084351], length 0 14:22:48.284755 IP stats.allstarlink.org.http > 192.168.1.5.35422: Flags [F.], seq 208, ack 317, win 235, options [nop,nop,TS val 914084432 ecr 1223955], length 0 14:22:48.284887 IP 192.168.1.5.35422 > stats.allstarlink.org.http: Flags [.], ack 209, win 237, options [nop,nop,TS val 1224037 ecr 914084432], length 0 14:22:48.296156 IP stats.allstarlink.org.http > 192.168.1.5.35424: Flags [F.], seq 208, ack 218, win 235, options [nop,nop,TS val 914084433 ecr 1223957], length 0 14:22:48.296248 IP 192.168.1.5.35424 > stats.allstarlink.org.http: Flags [.], ack 209, win 237, options [nop,nop,TS val 1224039 ecr 914084433], length 0 Please advise -- 73's Shehzad AP2CJ

4 10

Pi-Zero Support?
by ssedgwick 11 Sep '18

11 Sep '18

Does the Pi-Zero work with ASL_1.01-20180228 version of allstar? It see to load fine and I have wifi working on the pi-Zero, but it’s not registering and the heart beat LED on the fob is not flashing. I may have done something wrong, but before I start over I want to make sure it will work. The reason I’m using the pi-zero is I need the lowest possible power consumption and wifi connectivity. Thanks, Steve_WB8GRS

1 0

failed to connect error message
by George Csahanin 10 Sep '18

10 Sep '18

Trying to connect from 28599 (192.168.1.107) to 2428 (192.168.1.73) I get the following failure message on 2428: -- Accepting UNAUTHENTICATED call from 192.168.1.107: > requested format = gsm, > requested prefs = (gsm|ilbc|g726aal2|ulaw), > actual format = g726aal2, > host prefs = (g726aal2|gsm), > priority = mine -- Executing [2428@radio-secure:1] Rpt("IAX2/192.168.1.107:4571-5221", "2428") in new stack [Sep 9 11:49:25] WARNING[24760]: app_rpt.c:22701 rpt_exec: Reported node 28599, name none cannot be found!! == Spawn extension (radio-secure, 2428, 1) exited non-zero on 'IAX2/192.168.1.107:4571-5221' -- Hungup 'IAX2/192.168.1.107:4571-5221' 2428*CLI> Again, a head scratcher for me. As I get older this is more frequent... GeorgeC W2DB --- This email has been checked for viruses by AVG. https://www.avg.com

2 2

odd remote base problem
by George Csahanin 08 Sep '18

08 Sep '18

I managed to get my remote working. sort of... All functions work, its a ft-897, its running ACID. But it had one very odd issue. Three nodes at home, 28599 (900 MSF), 2360 (440 simplex node (original repeater failed) and node 2428, the remote base. It runs on ACID, 2360 is Limey, 28599 a one year old DIAL on a Pi. I cannot connect 28599 to 2428, it tells me there is a conflict I have all three with their rpt.conf have node entries for each other. That issue seems unrelated. I can connect node 2360 to 2428. I hear audio from the remote just fine. But when I talk into 2360 from my portable no audio comes out the FOB on the 2428 ACID PC. If I do radio-tune menu on 2428 and have a tone sent out to the remote that works. If I connect 28599 to 2360 and use a talky to transmit to 28599 that audio comes out 2428 to the ft-897. The docs on remote base are real thin. I had this all figured out in 2010 but can't find any notes on it after two moves. Using USBRADIO on the remote right now. Anybody have any suggestions? Thanks GeorgeC W2DB -- George Csahanin 10100 Carson Ranch Rd. Crowley, TX 76036 682-708-5710 office 401-338-0568 cel george(a)w2db.com

1 0

Re: [App_rpt-users] remote base
by George Csahanin 06 Sep '18

06 Sep '18

Mike, I have done all of the above fir my remote, a ft897 . But something is not right. When I try showvard fir the node I get a core dump, and asterisk exits. I just need to find a complete how-to on it. What is on the wiki is very thin on info. There used to be sample config files for a remote but can’t find it. If I comment out remote = ft897 and do showvars I get no dump. Is current DIAL for Pi able to do remotes? I have to dig, maybe I can find the computer I used fir a remote in 2010... George Csahanin Retired Sent from my iPhone > On Sep 5, 2018, at 11:58 PM, Mike <mm(a)midnighteng.com> wrote: > > A file would be dependent on your particulars. > But, > It's just a node as any other, define your cor/ptt/pl logic & audio methods, > and if is a freq agile remote, you may need to define port for tuning. See the wiki (i think it's in there) but some tune via serial and a DH-1 and some other though a parallel port definition. And define what kind of radio remote it is so it's tuning the right data instructions on that port. > > A parallel port definition in rpt.conf > iobase=0x378 ; Parallel port address > or > civaddr=72 ;(for ic-706) > Radio: > remote=ic706 > remote=rbi ; (doug hall rbi-1) > > and last you need to specify that the node number is a remote base > in rpt.conf node descriptions, with a 'Y' > 1999 = radio@127.0.0.1:4569/1999,Y > > But it might help some if you state what kind of remote base you wish to set-up. It's not all the same. hope this helped. > > ...mike/kb8jnm > >> On 9/6/2018 12:35 AM, George Csahanin wrote: >> Folks, I had a remote working back around 2010 using app_rpt. B ut I cannot find my documentation. I'm trying to lash it up again. But hit a brick wall on setting it up. Anybody have any config info that pertains specifically to remote. >> I've googled it but it leads to pretty incomplete info on this... >> GeorgeC W2DB >> nodes 2360, 2428, 28599 >> --- >> This email has been checked for viruses by AVG. >> https://www.avg.com >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users(a)lists.allstarlink.org >> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" >> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. >

1 0