- App_rpt-users - lists.keekles.org

New install x86, commands missing
by Edbathgate 10 Oct '18

10 Oct '18

Hi folks. I did a new install this afternoon of ASL with the 20180417 iso. It installed a nice debian stretch OS with pieces of asterisk, but none of the menu commands work, nor shell scripts: like astdn.sh, nor service asterisk status... the commands are unrecognised. I'm logged in locally on server console as user 'repeater'. I did ps -aux | grep "asterisk" and it does show that asterisk is running. I suspect a path issue, did a "set" command and it scrolled several pages that look like python script. Looked over the faq and troubleshooting pages on wiki, did not enlighten. Is there an erratta for this ISO, or am I just doing something really dumb? Please advise. Ed N3SDO

2 1

Re: [App_rpt-users] App_rpt-users Digest, Vol 113, Issue 25
by Gervais Fillion 03 Oct '18

03 Oct '18

Pierre,ve2pf. peut tu m ecrire personnel svp? pierre can you contact me privately please, at ve2ckn2 at hotmail.fr thanks folks , i need too talk at Pierre 73 gervais ve2ckn ________________________________ De : App_rpt-users <app_rpt-users-bounces(a)lists.allstarlink.org> de la part de app_rpt-users-request(a)lists.allstarlink.org <app_rpt-users-request(a)lists.allstarlink.org> Envoyé : 27 juillet 2018 12:00 À : app_rpt-users(a)lists.allstarlink.org Objet : App_rpt-users Digest, Vol 113, Issue 25 Send App_rpt-users mailing list submissions to app_rpt-users(a)lists.allstarlink.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users or, via email, send a message with subject or body 'help' to app_rpt-users-request(a)lists.allstarlink.org You can reach the person managing the list at app_rpt-users-owner(a)lists.allstarlink.org When replying, please edit your Subject line so it is more specific than "Re: Contents of App_rpt-users digest..." This site is dedicated to the memory of Jim Dixon WB6NIL Today's Topics: 1. IAXRPT Macros (Mike Besemer) 2. Re: Back up Asterisk (Pierre Martel) 3. Re: Back up Asterisk (Justin Harris) 4. Re: Private Node - Connection Failed - Clarification (Jim Aspinwall No1PC) 5. Re: Private Node - Connection Failed - Clarification (Bryan Fields) 6. Re: Private Node - Connection Failed - Clarification (David KE6UPI) 7. Re: Private Node - Connection Failed - Clarification (Bob Pyke) ---------------------------------------------------------------------- Message: 1 Date: Thu, 26 Jul 2018 18:14:26 -0400 From: "Mike Besemer" <mwbesemer(a)cox.net> To: "Users of Asterisk app_rpt" <app_rpt-users(a)lists.allstarlink.org> Subject: [App_rpt-users] IAXRPT Macros Message-ID: <001701d4252e$04927f20$0db77d60$(a)cox.net> Content-Type: text/plain; charset="us-ascii" Greetings all, Is it possible to reprogram the macros and macro labels on the Android version of IAXRPT? I've mucked about with it but it eludes me. Mike WM4B

1 0

rxvoiceadj
by Bob Pyke 02 Oct '18

02 Oct '18

What is the max value of rxvoiceadj, and what are its units of gain (linear multiplier or dB)? Thanks, Bob K6ECM Sent from iPad

1 0

Quad PCI Radio Card on DIAL
by Monty 02 Oct '18

02 Oct '18

Hello Everyone, Does anyone have complete steps to load a Quad PCI card in from a freshly installed DIAL on the current ISO? I'm migrating from ACID to DIAL. Here's what I have so far: 1. modprobe pciradio 2. Converted zaptel.conf to /etc/dahdi/system.conf 3. Copied zapata.conf from ACID machine to DIAL. 4. dahdi_cfg -vv 5. Copied rpt.conf and updated rxchannel= from zap/ to dahdi/ 6. Copied extensions.conf and iax.conf from ACID. Anything I'm missing? Monty

2 3

Asl-menu to set root password
by Bob Pyke 01 Oct '18

01 Oct '18

I’m missing something... I go through the first time, and other menus, thinking I’ve set a root password... no success. Sigh! Thanks, Bob K6ECM Sent from iPad

2 4

ASL on RPi 3 with WiFi
by Bob Pyke 30 Sep '18

30 Sep '18

Does ASL support the RPi 3 WiFi? If so, what do I need to know to set it up. I didn’t find any info on the wiki. Thanks, Bob K6ECM Sent from iPad

5 7

usbradio. conf
by Ryan Gross 30 Sep '18

30 Sep '18

Group, Recent install of listed build. Asterisk GIT Version adaec47 built by root @ odroidxu4 on a armv7l │ running Linux on 2018-03-07 14:53:41 UTC The problem I have ran into is when setting TX voice to 3.0 kHz I get a skipping of the tone. it goes away above 3.3 khc and below 2.9 kHz. the RX appears to be normal across the nodes I have connected to and save as expected. I am using the Repeater- builder original RIM and where I has in previous version Dial of ASL installed for Raspberry pi the PL tone worked.out of TXmixB. Is something different ? Ryan n3ssl [general] [usb_27671] eeprom = 0 ; EEPROM installed: 0,1 ; 0 = no (default) ; 1 = yes hdwtype = 0 ; Leave this set to 0 for USB sound fobs modified using ; the instructions from usbfob.pdf. Use a setting of ; 1 is for Dingotel/Sph interfaces. rxboost = 1 ; 0 - 20db attenuator inserted ; 1 - 20db attenuator removed ; Set to 1 for additonal gain if using a low-level receiver output rxctcssrelax = 1 ; reduce talkoff from radios w/o CTCSS TX HPF ; Do not change this, leave this as a 1 rxsqhyst = 375 ; Setting Squelch Hysteresis ; 3000 is the default amount. ; An amount of 500 seems good. ; Then set the squelch to the highest number revealed when doing a "radio ; tune rxsquelch" - running the command multiple (like 20) times in a row. ; <http://allstarnode.com/wiki/lib/exe/fetch.php?media=asterisk-notes-wj8g.pdf> txctcssdefault = 85.4 ; default TX CTCSS frequency, any frequency permitted rxctcssfreqs = 85.4 ; RX CTCSS frequencies list in floating point. must be in table txctcssfreqs = 85.4 ; TX CTCSS frequencies list. any frequency permitted. will follow RX CTCSS frequency rxctcssoverride = 0 ; Set to 1 to start out in carrier squelch mode carrierfrom = dsp ; no,usb,usbinvert,dsp,vox ; no - no carrier detection at all ; usb - from the COR line on the USB sound fob (Active high) ; usbinvert - from the inverted COR line on the USB sound fob (Active low) ; dsp - from RX noise using DSP techniques ; vox - voice activated from RX audio ctcssfrom = dsp ; no,usb,usbinvert,dsp ; no - no CTCSS decoding, system will be carrier squelch ; usb - from the CTCSS line on the USB sound fob (Active high) ; usbinvert - from the inverted CTCSS line on the USB sound fob (Active low) ; dsp - CTCSS decoding using RX audio in DSP. ; rxdemod option must be set to flat for this to work. rxdemod = flat ; input type from radio: no,speaker,flat ; no - RX audio input not used ; flat - Use RX audio from discriminator (before de-emphasis) ; speaker - use de-emphasized audio rxsquelchdelay = 30 ; delayline in ms carrier squelch tail eliminator rxondelay = 0 ; Number of 20mSec intervals following the release of PTT. ; Uncomment and/or adjust for simplex nodes to eliminate "Ping Ponging" ; or "Relay Racing". A positive value here will instruct the usbradio ; driver to ignore the COR line for a specified number of 20mSec ; intervals following the release of PTT. Use this ONLY on simplex ; nodes, and leave commented out for repeaters or other full duplex nodes. txboost = 1 ; Add transmitter audio gain boost: 0,1 txprelim = no ; Audio processing on left output channel: no,yes ; no - Audio is not pre-emphasized and limited. ; Suitable for use on a microphone input ; yes - Audio is pre-emphasized and limited. ; Suitable for direct connection to an FM modulator txlimonly = no ; Audio limiting with no pre-emphasis on output channel: no,yes ; no - Audio is not limited. ; yes - Audio is limited. ; Suitable for transmitters with no limiting but with pre-emphasis. txtoctype = notone ; Transmit tone control type: no,phase,notone ; no - CTCSS tone encoding with no hang time ; phase - encode CTCSS and reverse phase ; AKA ("reverse burst") before unkeying TX ; notone - encode CTCSS and stop sending tone before unkeying TX ; AKA ("chicken burst") txmixa = voice ; Left channel output: no,voice,tone,composite,auxvoice ; no - Do not output anything ; voice - output voice only ; tone - CTCSS tone only ; composite - voice and tone ; auxvoice - auxiliary voice output at headphone level for monitoring txmixb = tone ; Right channel output: no,voice,tone,composite, auxvoice ; no - Do not output anything ; voice - output voice only ; tone - CTCSS tone only ; composite - voice and tone ; auxvoice - auxiliary voice output at headphone level for monitoring invertptt = 0 ; Invert PTT: 0,1 ; 0 - ground to transmit ; 1 - open to transmit duplex = 1 ; Duplex 0,1 ; 0 - half duplex ; 1 - full duplex duplex3 = 0 ; duplex 3 gain setting (0 to disable) ??? rxlpf = 1 ; Receiver Audio Low Pass Filter 0,1 2 ; 0 - 3.0 kHz cutoff (Default) value for reduced noise and increased intelligibility. ; 1 - 3.3 kHz cutoff for increased high end, sibilance and brightness. ; 2 - 3.5 kHz cutoff for even more high end, sibilance and brightness. rxhpf = 1 ; Receiver Audio High Pass Filter 0,1 ; 0 - 300 Hz cutoff. (Default) value to reduce sub-audible signals for retransmission and in the receiver speaker. ; 1 - 250 Hz cutoff for additional received and retransmitted bass response. ; recommend using this filter with a CTCSS tone no higher than 186.2 Hz. txlpf = 1 ; Transmitter Audio Low Pass Filter 0,1 ; 0 - 3.0 kHz cutoff. (Default) value. ; 1 - 3.3 kHz cutoff for increased high end, sibilance and brightness. txhpf = 1 ; Transmitter Audio High Pass Filter 0,1,2 ; 0 - 300 Hz cutoff. (Default) value to reduce interference between voice and sub-audible signaling tones and codes. ; 1 - 250 Hz cutoff for increased bass response in transmitted audio. ; 2 - 120 Hz cutoff for special applications requiring additional bass response in transmitted audio. ; Not recommended due to the increased possibility of voice energy interfering with sub-audible signaling

2 1

Re: [App_rpt-users] Error when upgrading
by Corey 27 Sep '18

27 Sep '18

Mike, This node is working without any issues. The kernel headers are already set on hold. I've run the update and upgrade elevated to root and still see the error. I installed ASL on a pi-star image a year ago. I'm not too concerned if I can't upgrade ASL since I don't see any operational errors. I just wanted to report back the group the upgrade errors I am seeing. Thanks, Corey > > > > Message: 2 > Date: Wed, 26 Sep 2018 19:39:02 -0400 > From: Mike <mm(a)midnighteng.com> > To: app_rpt-users(a)lists.allstarlink.org > Subject: Re: [App_rpt-users] Error when upgrading > Message-ID: <8557a9e9-c1c1-6c64-59b3-1ed94f0a9072(a)midnighteng.com> > Content-Type: text/plain; charset=utf-8; format=flowed > > Have you place the kernel headers on hold as per the readme ? > > Login: repeater > Passsword: allstarlink > SSH port: 22 > User repeater has sudo privileges (sudo -s) > > There may have been updates to the operating system and AllStarLink > since this image was built. > Run the following commands after the first time you boot. > > sudo apt-mark hold raspberrypi-kernel-headers raspberrypi-kernel > sudo apt-get update > sudo apt-get upgrade -y > sudo reboot > > at the # prompt run "asl-menu" to setup your node. > > ...mike/kb8jnm > > > > ********************************************** >

1 0

Server download to allstarlink.org
by Ryan Gross 27 Sep '18

27 Sep '18

Hi All, Trying to download my server onto allstarlink.org and get this message. on cli No such command 'No such command '[Sep 26 22:04:22] NOTICE[474]: chan_iax2.c:9471 socket_process: Rejected connect attempt from 67.215.233.178, request '0@allstar-sys' does not exist' (type 'help [Sep 26' for other possible commands)' (type 'help No such' for other possible commands) Ryan n3ssl

2 1

Error when upgrading
by Corey 26 Sep '18

26 Sep '18

Good evening I see this error when doing a "sudo apt-get upgrade". the system is a pi 3. sudo apt-get upgrade Reading package lists... Done Building dependency tree Reading state information... Done Calculating upgrade... Done The following packages have been kept back: allstarlink asl-asterisk The following packages will be upgraded: asl-asterisk-tools 1 upgraded, 0 newly installed, 0 to remove and 2 not upgraded. 15 not fully installed or removed. Need to get 0 B/81.8 kB of archives. After this operation, 0 B of additional disk space will be used. Do you want to continue? [Y/n] y Reading changelogs... Done (Reading database ... 88465 files and directories currently installed.) Preparing to unpack .../asl-asterisk-tools_1.01-20180226-12_all.deb ... Unpacking asl-asterisk-tools (1.01-20180226-12) over (0.9-20170809-1) ... dpkg: error processing archive /var/cache/apt/archives/asl-asterisk-tools_1.01-20180226-12_all.deb (--unpack): trying to overwrite '/lib/systemd/system/updatenodelist.service', which is also in package asl-asterisk 0.9-20170809-2 dpkg-deb: error: subprocess paste was killed by signal (Broken pipe) Errors were encountered while processing: /var/cache/apt/archives/asl-asterisk-tools_1.01-20180226-12_all.deb E: Sub-process /usr/bin/dpkg returned an error code (1)

2 1