- App_rpt-users - lists.keekles.org

URI
by Jean Létourneau 07 Apr '12

07 Apr '12

Hi, I know it's probably not the place but, I have 2 URI (USB Radio Interface) from dmkeng, praticaly new for sell, I let the 2 go for $100.00 +Shipping.(OBO) I have dropped the project, running out of times. If interested please contact me off the list. 73 de Jean, VE2PKT/VA2OM E-mail: ve2pkt(a)gmail.com or ve2pkt(a)amsat.org

1 0

Busy Reflector
by Jim W7RY 05 Apr '12

05 Apr '12

Does anyone have a list of all* reflectors with lots of activity like the WIN system? My node is possibly looking for a new home. Thanks 73 Jim W7RY

1 0

Node locked how to disconnect???
by Fran 05 Apr '12

05 Apr '12

I have a simplex node connected 24hrs a day to my repeater and server however recently that node went into a continued transmit and I was unable to disconnect it, I tried rebooting/restarting my server, also tried the DTMF disconnect tones to no avail. When this happens is there anyway other than shutting the server to disconnect Nodes? Frank

1 0

Deleting Node
by Ken Robinson 05 Apr '12

05 Apr '12

Hi, Can anyone tell me how to delete a server and node I have incorrectly set up, I'm told it is possible but I cannot find anywhere on the portal that will allow me to do that Regards Ken G0LCE

1 0

unable to get incoming connections
by Ken Robinson 04 Apr '12

04 Apr '12

Hi, Since I have put a new node on my system I cannot get incoming calls on my Allstar node My Node number is 28468 I have just noticed on the Portal site it is saying that the node was created on Wednesday 31st December 1969 16.00 PST. When in fact it was put on Yesterday. My settings, port forwarding etc. are exactly the same as they were when everything worked perfectly. I can make outgoing contacts perfectly Hope you can help Regards Ken G0LCE

2 2

Configering extra node
by Ken Robinson 02 Apr '12

02 Apr '12

Hi, I have just set up an Allstar node (28431) with my call sign G0LCE. I have applied for and received an NOV on my licence to allow unattended operation call sign MB7ICE I have got a node for that call sign (28468) As I'll only be using the MB7ICE call on Allstar is it possible just to overwrite node numbers and call signs from the G0LCE node. If that's not the way to do it can someone point me in the right direction as I cannot see how to add another node Regards Ken G0LCE

1 0

Re: [App_rpt-users] Dtmf passthrough?
by Anthony Percy 01 Apr '12

01 Apr '12

Hi Mars, Sorry for the delay and thanks for the reply. I thought it may have been a design feature....! I will start debugging it.... regards Anthony, VK2ACP On Thu, Mar 29, 2012 at 3:47 AM, ALERTradio ERC | N0PCO <n0pco(a)alertradio.net> wrote: > > Hello Anthony, here is a link from VoIP-Info that should help some (check > into inband settings that is mentioned): > > http://www.voip-info.org/wiki/view/Asterisk+DTMF > > The system that I have here, is working with a separate PBX (that handles > phone / vmail duties) and RF Gateway (handles radio and paging duties). > The only time everything was on one server was when we were working with the > original XIPAR package. In the long run it is just easier to have two > separate servers that can communicate with each other. The inband DTMF > settings should help to get those commands through to the vmail though. > > Mars - N0PCO > ALERTradio ERC > www.alertradio.net | www.asteriskradio.net | www.darnsimple.net > Technology resources for public safety. It's all about being ready. > > > > Remember reality sometimes bites, to prevent reality bites quit pulling its > tale. > > > > > On 03/28/2012 06:23 AM, Anthony Percy wrote: > > Hi all, no one commented on my message so i have resent it below just in > case it was missed.... > Any comments anyone??? > > Regards > Anthony, VK2ACP > > > Hi all, > I have setup voicemail on our Allstar repeater e.g i can call the voicemail > by doing a *69999 with 9999 being the voicemail. I can hear the voicemail > menu but none of my dtmf commands are accepted.. I thought that if i used > the dtmf transmit comand it may work but it still does not work... > Any ideas on how to pass dtmf to the voicemail? > > Regards > Anthony, VK2ACP > _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > >

1 0

Can I Disable the repeater TX?
by Ron Simpson 31 Mar '12

31 Mar '12

Guys, Running a 3 node system here, I am using my Allstar Computer as my site controller, 440 and 900 are each a separate node. My question is: Can I individually disable any TX when none of the nodes are linked together? Each repeater is a stand-alone system that can be linked at will. I need the ability to shut off a TX in the event of interference, jamming or other reasons. Can this be done? 73, Ron - N6GKJ Sent from Yahoo! Mail on Android

1 0

Asterisk security issue
by Lu Vencl 30 Mar '12

30 Mar '12

Anyone see this notice yet? Any thing we should be concerned about? http://www.securityfocus.com/advisories/24498 Sent from my iPhone, Lu Vencl >

2 1

Node List
by w6reb 30 Mar '12

30 Mar '12

Have noticed connection problems the past couple days and looking at the rpt_extnodes file that it says “Originally Generated at Sat Mar 24 18:15:09 PDT 2012. Checking further I have noticed two other friends with Nodes in different locations with the same problem. It does show a fresh update but obviously it NOT really updating as I believe the current Generated List should be the same date. One more note, you can delete the rpt_extnodes file and it will regenerate a new list with the date of Mar 24 once again. What’s up with this?

3 2