- App_rpt-users - lists.keekles.org

telemetry
by Paul M. Nannery 01 Feb '12

01 Feb '12

Ok so I need to have to sets of telemetry on one system the docs say this is easy just use the telemetry stanza to do it but it's not working when the second telemetry is used it uses the default telemetry not what I defined. Any ideas? Here is my stanza telemetry=telemetry27089 This goes with [telemetry27089] ct1=|t(660,0,100,2048)(800,0,100,2048) ct2=|iU ct3=|t(440,0,150,4096) ct4=|t(660,30,2048)(500,30,2048)(385,30,2048) ct5=|t(660,0,150,2048) ct6=|t(880,0,150,2048) ct7=|t(1760,0,25,4096)(1760,0,25,4096)(1760,0,25,4096) ct8=|t(700,1100,150,2048) ct9=|t(800,0,100,2048)(660,0,100,2048) remotetx=|t(800,0,100,2048)(660,0,100,2048) remotemon=|t(1209,0,50,2048) cmdmode=|t(900,903,200,2048) functcomplete=|t(1000,0,100,2048)(0,0,100,0)(1000,0,100,2048) patchup=rpt/callproceeding patchdown=rpt/callterminated

2 1

Arcom ports disconnect
by Fran 01 Feb '12

01 Feb '12

My problem is that Im geting random port disconnects. Ive checked everything and thought I might be missing something somewhere. The way im setup is Port 1 (Repeater), Port 2 (Allstar Link), Port 3 (IRLP). I link port 1 to Port 2, then I link Port 1 to Port 3. Arcom RC210 controller with Firmware rc2105_2844. Frank

3 2

Slight mod to DMK GPIO driver circuit when used for a fan controller
by Bryan D. Boyle 01 Feb '12

01 Feb '12

In hacking (thanks, Kyle) through getting both the script working (hey, had to modify it for my own install, which is a good thing...:)) and addressing the proper node/dongle number...and getting the parts to build the circuit (at Radio Shack, believe it or not...) as shown at the DMK site so I could actually drive my cooling fans (with 3 repeaters, a 100w amp, and batwing spectra transmitter that gets Real Toasty even at 12w out, the amount of constant noise is a bit much, even in the basement...not to mention the electricity consumption), it's all up and working. However, in talking with Scott KB2EAR, he brought up the issue of the possibility (not remote..) of the controller or a dongle hanging or going brain dead in between the time that the radio keys up and the fan controller script turns on the relay...with the possibility that the radio would key (along with the amp...) but the fans would never come up. So...belt and suspenders time. I have an extra box of shalco thermoswitches...NO contacts, close at 115c, reopen at 95c or thereabouts. Since the relay (I like electromechanical stuff, ok? Nothing like the sound of contactors closing all around the shack when you press one button...brings me back to the days of running BIG transmitters and the plate contactor closing when you pressed 'PLATE ON' and saw the plate voltage meter swing to 18KV @ 2.6A) that's being driven by the DMK circuit is actually controlling the B+ to the fan string...putting one of the thermo switches across the armature and NO contact of the relay...well, if the computer hangs, or the relay fails, and the transmitter and amps are up...when they get warm enough, the secondary mechanical (rather than logical) circuit takes over and STILL turns the fan on. I'd rather fail, if that's the scenario, with cooling flow across the heat sinks than not. Obviously, this implies that the logical circuit is driven from the same power supply as the fans (mine are...) to eliminate that issue. Anyway...wired that up as an addition to the relay circuit; actually, it's just a pair of wires coming back from the shalco and paralleled across the leads from the relay. Just throwing that out there for y'all's consideration, if you're building the circuit from DMK to do something like this. (Still have to mount the DMK circuit on perfboard in a small project box and clean up the wiring...right now, it's just hanging by its wires in front of the repeater shelving unit (plastic...one of those Sears 5-shelf organizers...). Final cost, by the by, of the DMK circuit, using bits and pieces from the Shack, was under $10 USD, btw. And the biggest cost was the big piece of perfboard (which I cut down, so I have lots extra to use for other projects) and the small DPDT relay. Bought the 10-pack of transistors, 10-pack of diodes, and couple sleeves of the 4.7K resistors, so, have some extras to build other interfaces... 73 -- Bryan In this world, you must be oh so smart or oh so pleasant. Well, for years I was smart. I recommend pleasant. You may quote me. Sent from my MacBook Pro.

2 1

tailmessage
by Neal Garbenis 31 Jan '12

31 Jan '12

I am trying to get a tailmessage to work. I have this in rpt.conf ;; The tailmessagetime,tailsquashedtime, and tailmessages need to be set ;; to support tail messages. They can be omitted otherwise. tailmessagetime=300000 ; Play a tail message every 5 mins tailsquashedtime=30000 ; If squashed by another user, ;; try again after 30 seconds tailmessages=NG8Y ;list of messages to be played for tail message I have the audio file saved in .pcm format and saved in var/lib/asterisk/rpt with proper permissions. I cant get it to play. I have also tried to specify tailmessage location still a no go Anybody have any ideas Thanks Neal NG8Y

5 8

getting started trouble
by Stephen Liggett 31 Jan '12

31 Jan '12

I am transitioning our repeater from IRLP to ALLSTAR and I am having some trouble. I installed ACID, and it went without any trouble. With the URI connected, the green light blinks. I can ping yahoo.com, and I have ports 4569 and 222 forwarded. As it stands, the node (28325, W3YT) shows up on the web transceiver in green, but nobody seems to be able to connect to it. nscheck.sh gives an output of Node 1, Node 2 are up, node 3, node 4 are down (whatever that means). I do not have the repeater connected, but I assume that one should be able to connect to the node, regardless of whether there is anything connected to the URI. It seems to me that I am missing something here. Can someone get me past this? steve W3RX trustee for W3YT repeater IRLP 8676 Allstar 28325 PS Minor question, on my node info, I somehow never saw the chance to put in the freq, tone, and description of the repeater. Can that be done now?

7 6

Digital-Coded squelch
by Michael Hebert 31 Jan '12

31 Jan '12

Is the ACID distro capable of encoding and decoding Digital-coded squelch?

1 0

Reverse Autopatch.
by BRADLEY HANEY 31 Jan '12

31 Jan '12

Has anyone figured out on how to answer an incoming call from a reverse auto patch. I have tried *6701 *60701 and just plain *6 but no go..

1 0

Delay on playback.
by Bradley Haney 30 Jan '12

30 Jan '12

when i play the day and time it seems that the "GOODMORNING" or such gets cut off and the same when the autopatch is suppose to say "Call terminated" does anyone know where the setting is to key up the radio for X amount of milli seconds before playing the file? Also Has anyone had success on answering a reverse autopatch. i have tried every suggestion that i received by email and no joy. Bradley

2 1

Re: [App_rpt-users] GPIO fan control script now available
by K&R Yoksh 30 Jan '12

30 Jan '12

Hello Jim, My scripts are available at www.qsl.net/k0kn/scripts.html 73 Kyle K0KN

1 0

stats.allstarlink.org/nodeinfo issue
by Gary Herzog SS 30 Jan '12

30 Jan '12

Ok quick question I think.. when I click on this link below I get "Node 28099 is no longer in the database" why?? http://stats.allstarlink.org/nodeinfo.cgi?node=28099 I have ; ** For ACID *** statpost_program=/usr/bin/wget,-q,--timeout=15,--tries=1,--output-document=/ dev/null statpost_url=http://stats.allstarlink.org/uhandler.php ; Status updates in my rpt.conf enabled. I can connect to it with my other servers and nodes I do the command below and it indicates I am registered.. kc5daq-voip-hub*CLI> iax2 show registry Host dnsmgr Username Perceived Refresh State 67.215.233.178:4569 N 28099 74.124.47.53:4569 60 Registered I must be missing something here thanks for any help.. Kc5daq Gary

1 0