- App_rpt-users - lists.keekles.org

Re: [App_rpt-users] Syntor X Remote Base
by Tim Sawyer 31 Oct '11

31 Oct '11

The stuff on my web site is for Xcat with Doug Hall protocol. -- Tim :wq On Oct 31, 2011, at 2:45 PM, Monty wrote: > Ok, makes sense. I was looking at your wiring diagram on xcat yahoo group that showed Data and Clock. > > Monty > > > On Mon, Oct 31, 2011 at 9:17 AM, Tim Sawyer <tim.sawyer(a)me.com> wrote: > Xcat and app_rpt are using the CI-V protocol. So, it's txd -> rxd and rxd -> txd. No clock and data involved. > -- > Tim > :wq > > On Oct 30, 2011, at 8:48 PM, Monty wrote: > >> Data -> txd >> Clock -> rxd >> >> or vise versa? >> >> Monty >> >> >> On Sun, Oct 30, 2011 at 8:55 AM, Tim Sawyer <tim.sawyer(a)me.com> wrote: >> Nothing to it, just rxd and txd. >> -- >> Tim >> :wq >> >> On Oct 29, 2011, at 11:36 PM, Monty wrote: >> >>> Nice! Thanks Tim. I just got the Xcat all wired up and I am able to control with the Xcat PC program. Do you have a pinout for how to connect the data lines to the Allstar PC's serial port? >>> >>> Monty >>> >>> >>> On Fri, Oct 28, 2011 at 6:49 PM, Tim Sawyer <tim.sawyer(a)me.com> wrote: >>> Yes! Here's the applicable settings from the rpt.conf node stanza: >>> >>> [your node number] >>> rxchannel = Simpleusb/usb ; Rx audio/signalling channel >>> remote = xcat >>> civaddr = 32 >>> functions = functions-remote >>> ;lconn = PP3=1 >>> ;ldisc = PP3=0 >>> memory = memory ; Section to hold memory entries (optional) >>> ; remote=ft897 for Yaesu FT-897 or >>> ; remote=rbi for Doug Hall RBI1 >>> ; remote=kenwood for Kenwood mobiles such as the TMG707A >>> ; remote=ic706 for the Icom IC-706 >>> ioport = /dev/ttyS0 ; Specify port for serial port (optional) >>> iospeed = 19200 >>> dusbabek = yes ; either you need it or you don't >>> >>> ;iobase = 0x378 ; Specify IO port for parallel port (optional) >>> authlevel = 2 ; Remote base authentication level >>> ;; authlevel = 0 : Anyone can use it >>> ;; authlevel = 1 : Requires log in, Waits for Tx key to ask for it >>> ;; authlevel = 2 : Requires log in, asks for it automously >>> ;mars = 0 ; set=1 for IC-706 w/MARS mods (optional) >>> >>> remote_inact_timeout=0 ; Inactivity timer for remote base nodes only (set to 0 to disable). >>> remote_timeout=5400 ; Session time out for remote base. (set to 0 to disable) >>> >>> >>> -- >>> Tim >>> :wq >>> >>> On Oct 28, 2011, at 2:23 PM, Monty wrote: >>> >>> > Hello Everyone, >>> > I am wondering if anyone on the list has successfully integrated a Syntor X with an Xcat to app_rpt? I have 2m and a 10m/6m flavor. Would the 10m/6m have trouble? >>> > >>> > Monty >>> > _______________________________________________ >>> > App_rpt-users mailing list >>> > App_rpt-users(a)ohnosec.org >>> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users >>> >>> _______________________________________________ >>> App_rpt-users mailing list >>> App_rpt-users(a)ohnosec.org >>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users >>> >> >> >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users(a)ohnosec.org >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users >> >> > >

1 0

Re: [App_rpt-users] Syntor X Remote Base
by Tim Sawyer 31 Oct '11

31 Oct '11

Xcat and app_rpt are using the CI-V protocol. So, it's txd -> rxd and rxd -> txd. No clock and data involved. -- Tim :wq On Oct 30, 2011, at 8:48 PM, Monty wrote: > Data -> txd > Clock -> rxd > > or vise versa? > > Monty > > > On Sun, Oct 30, 2011 at 8:55 AM, Tim Sawyer <tim.sawyer(a)me.com> wrote: > Nothing to it, just rxd and txd. > -- > Tim > :wq > > On Oct 29, 2011, at 11:36 PM, Monty wrote: > >> Nice! Thanks Tim. I just got the Xcat all wired up and I am able to control with the Xcat PC program. Do you have a pinout for how to connect the data lines to the Allstar PC's serial port? >> >> Monty >> >> >> On Fri, Oct 28, 2011 at 6:49 PM, Tim Sawyer <tim.sawyer(a)me.com> wrote: >> Yes! Here's the applicable settings from the rpt.conf node stanza: >> >> [your node number] >> rxchannel = Simpleusb/usb ; Rx audio/signalling channel >> remote = xcat >> civaddr = 32 >> functions = functions-remote >> ;lconn = PP3=1 >> ;ldisc = PP3=0 >> memory = memory ; Section to hold memory entries (optional) >> ; remote=ft897 for Yaesu FT-897 or >> ; remote=rbi for Doug Hall RBI1 >> ; remote=kenwood for Kenwood mobiles such as the TMG707A >> ; remote=ic706 for the Icom IC-706 >> ioport = /dev/ttyS0 ; Specify port for serial port (optional) >> iospeed = 19200 >> dusbabek = yes ; either you need it or you don't >> >> ;iobase = 0x378 ; Specify IO port for parallel port (optional) >> authlevel = 2 ; Remote base authentication level >> ;; authlevel = 0 : Anyone can use it >> ;; authlevel = 1 : Requires log in, Waits for Tx key to ask for it >> ;; authlevel = 2 : Requires log in, asks for it automously >> ;mars = 0 ; set=1 for IC-706 w/MARS mods (optional) >> >> remote_inact_timeout=0 ; Inactivity timer for remote base nodes only (set to 0 to disable). >> remote_timeout=5400 ; Session time out for remote base. (set to 0 to disable) >> >> >> -- >> Tim >> :wq >> >> On Oct 28, 2011, at 2:23 PM, Monty wrote: >> >> > Hello Everyone, >> > I am wondering if anyone on the list has successfully integrated a Syntor X with an Xcat to app_rpt? I have 2m and a 10m/6m flavor. Would the 10m/6m have trouble? >> > >> > Monty >> > _______________________________________________ >> > App_rpt-users mailing list >> > App_rpt-users(a)ohnosec.org >> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users >> >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users(a)ohnosec.org >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users >> > > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > >

1 0

cop 2 - causing PTT lock
by Ramesh Dhami (VA3UV) 30 Oct '11

30 Oct '11

Hi Jim and all; Running app_rpt v0.287 (full duplex); when I issue a DTMF command to re-enable the repeater (from it's disabled cop 3 state), the repeater keys up, we hear Alison announce 'RPT ENA' and then the PTT remains keyed. I have to send a '*0' to get the PTT to drop. This is on a system that I just rebuilt recently. AFAIK, this problem did not exist with an earlier version of app_rpt (sorry, I can't be more specific than that!). Wonder if this is a bug or something that I am missing from my config file, etc? Cheers! Ramesh. www.freestar.us

4 8

No Pickle Luck
by buck 30 Oct '11

30 Oct '11

So I want to build another microSd card with pickle on it. Download from AllStarLink works DD if=. of=. bs=4M (This creates a boot and file partition) Pop the card in my beaglexM Rev C (This board is running another version of pickle OK) Result: No boot! Help? Birton, N6UG

2 2

Re: [App_rpt-users] Syntor X Remote Base
by Tim Sawyer 30 Oct '11

30 Oct '11

Nothing to it, just rxd and txd. -- Tim :wq On Oct 29, 2011, at 11:36 PM, Monty wrote: > Nice! Thanks Tim. I just got the Xcat all wired up and I am able to control with the Xcat PC program. Do you have a pinout for how to connect the data lines to the Allstar PC's serial port? > > Monty > > > On Fri, Oct 28, 2011 at 6:49 PM, Tim Sawyer <tim.sawyer(a)me.com> wrote: > Yes! Here's the applicable settings from the rpt.conf node stanza: > > [your node number] > rxchannel = Simpleusb/usb ; Rx audio/signalling channel > remote = xcat > civaddr = 32 > functions = functions-remote > ;lconn = PP3=1 > ;ldisc = PP3=0 > memory = memory ; Section to hold memory entries (optional) > ; remote=ft897 for Yaesu FT-897 or > ; remote=rbi for Doug Hall RBI1 > ; remote=kenwood for Kenwood mobiles such as the TMG707A > ; remote=ic706 for the Icom IC-706 > ioport = /dev/ttyS0 ; Specify port for serial port (optional) > iospeed = 19200 > dusbabek = yes ; either you need it or you don't > > ;iobase = 0x378 ; Specify IO port for parallel port (optional) > authlevel = 2 ; Remote base authentication level > ;; authlevel = 0 : Anyone can use it > ;; authlevel = 1 : Requires log in, Waits for Tx key to ask for it > ;; authlevel = 2 : Requires log in, asks for it automously > ;mars = 0 ; set=1 for IC-706 w/MARS mods (optional) > > remote_inact_timeout=0 ; Inactivity timer for remote base nodes only (set to 0 to disable). > remote_timeout=5400 ; Session time out for remote base. (set to 0 to disable) > > > -- > Tim > :wq > > On Oct 28, 2011, at 2:23 PM, Monty wrote: > > > Hello Everyone, > > I am wondering if anyone on the list has successfully integrated a Syntor X with an Xcat to app_rpt? I have 2m and a 10m/6m flavor. Would the 10m/6m have trouble? > > > > Monty > > _______________________________________________ > > App_rpt-users mailing list > > App_rpt-users(a)ohnosec.org > > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users >

1 0

Syntor X Remote Base
by Monty 29 Oct '11

29 Oct '11

Hello Everyone, I am wondering if anyone on the list has successfully integrated a Syntor X with an Xcat to app_rpt? I have 2m and a 10m/6m flavor. Would the 10m/6m have trouble? Monty

5 7

Pickle Linux Site
by Keith Dobbins 28 Oct '11

28 Oct '11

Did the Picklejaj linux site dissapear? I'm interested in getting a beagleboard to play with and lox but wanted to look at the info first and the site seems to be inaccessible. Keith Dobbins A.S. Flight Paramedic 3402 Linden Street Parkersburg, WV 26104-1608 Amateur Radio Call Sign: KC8RFW

2 1

Re: [App_rpt-users] App_rpt-users Digest, Vol 32, Issue 27
by Mark Huelskoetter 27 Oct '11

27 Oct '11

Are you running 3 nodes on this server or just two? Because your lsusb output suggests that you are running 3 URI's. If that's the case asterisk might be getting confused on which usb device is which. Before you go through the hassle of recompiling everything try unplugging all of the radio interfaces, run asterisk and look for the segfault. Next, add one back, restart asterisk and see what happens, etc...You see where I am going with this? Try them all, maybe even in different ports. If you are still having problems, download the new sources and compile. I suggest you back up of the .conf files in /etc/asterisk, then obtain the new source code. Per the instructions on the Allstar webpage, you can get it in the following fashion: cd /usr/src/ wget http://x.allstarlink.org/svn-trunk.tar.gz -O- | tar xzv mv trunk astsrc cd astsrc Then you can use the make command. I think make install_usbradio is correct for your situation, I am not where I can check my notes. Someone else might be able to suggest something different. Good LUCK!!! Mark - WL7NI

1 0

Re: [App_rpt-users] App_rpt-users Digest, Vol 32, Issue 27
by Ken Page 27 Oct '11

27 Oct '11

Hi, OK I worked out why Zaptel wasn't running. When I re-compiled and re-installed Asterisk the init.d stuff got over written. I've put back the old one and now all the Zaptel and wctdm stuff is running again as it should. However this still doesn't solve the problem. I still get the segmentation fault and dropout of the Asterisk service 10 seconds after it has booted up. Everything runs fine up till this point. I have quickly been able to confirm the radio devices work, and conference etc works before the crash. Disabling the radio stuff still shows a seg fault. So I don't believe it's directly related to any of the radio modules. I include the tail of the log below. ~Ken - vk4akp .-.-. -- Your zaptel interface is not loading. Try killing asterisk then run: modprobe zaptel service zaptel start service asterisk restart See if it works. If not looks at the system log and see what errors are coming up. Mark - WL7NI -- -- Including context 'ael-dundi-e164-via-pstn' in context 'ael-dundi-e164-local' -- Registered extension context 'ael-dundi-e164-switch' -- Including switch 'DUNDi/e164' in context 'ael-dundi-e164-switch' -- Registered extension context 'ael-dundi-e164-lookup' -- Including context 'ael-dundi-e164-local' in context 'ael-dundi-e164-lookup' -- Including context 'ael-dundi-e164-switch' in context 'ael-dundi-e164-lookup' -- Registered extension context 'macro-ael-dundi-e164' -- Registered extension context 'ael-iaxtel700' -- Registered extension context 'ael-iaxprovider' -- Registered extension context 'ael-trunkint' -- Including context 'ael-dundi-e164-lookup' in context 'ael-trunkint' -- Registered extension context 'ael-trunkld' -- Including context 'ael-dundi-e164-lookup' in context 'ael-trunkld' -- Registered extension context 'ael-trunklocal' -- Registered extension context 'ael-trunktollfree' -- Registered extension context 'ael-international' -- Including context 'ael-longdistance' in context 'ael-international' -- Including context 'ael-trunkint' in context 'ael-international' -- Registered extension context 'ael-longdistance' -- Including context 'ael-local' in context 'ael-longdistance' -- Including context 'ael-trunkld' in context 'ael-longdistance' -- Registered extension context 'ael-local' -- Including context 'ael-default' in context 'ael-local' -- Including context 'ael-trunklocal' in context 'ael-local' -- Including context 'ael-iaxtel700' in context 'ael-local' -- Including context 'ael-trunktollfree' in context 'ael-local' -- Including context 'ael-iaxprovider' in context 'ael-local' -- Registered extension context 'macro-ael-std-exten-ael' -- Registered extension context 'ael-demo' -- Registered extension context 'ael-default' -- Including context 'ael-demo' in context 'ael-default' -- Added extension 's' priority 1 to macro-ael-dundi-e164 -- Added extension 's' priority 2 to macro-ael-dundi-e164 -- Added extension 's' priority 3 to macro-ael-dundi-e164 -- Added extension 's' priority 4 to macro-ael-dundi-e164 -- Added extension '_91700XXXXXXX' priority 1 to ael-iaxtel700 -- Added extension '_9011.' priority 1 to ael-trunkint -- Added extension '_9011.' priority 2 to ael-trunkint -- Added extension '_91NXXNXXXXXX' priority 1 to ael-trunkld -- Added extension '_91NXXNXXXXXX' priority 2 to ael-trunkld -- Added extension '_9NXXXXXX' priority 1 to ael-trunklocal -- Added extension '_91800NXXXXXX' priority 1 to ael-trunktollfree -- Added extension '_91888NXXXXXX' priority 1 to ael-trunktollfree -- Added extension '_91877NXXXXXX' priority 1 to ael-trunktollfree -- Added extension '_91866NXXXXXX' priority 1 to ael-trunktollfree -- Added extension 's' priority 1 to macro-ael-std-exten-ael -- Added extension 's' priority 2 to macro-ael-std-exten-ael -- Added extension 's' priority 3 to macro-ael-std-exten-ael -- Added extension 's' priority 4 to macro-ael-std-exten-ael -- Added extension 's' priority 5 to macro-ael-std-exten-ael -- Added extension 's' priority 6 to macro-ael-std-exten-ael -- Added extension 's' priority 7 to macro-ael-std-exten-ael -- Added extension 's' priority 8 to macro-ael-std-exten-ael -- Added extension 'a' priority 1 to macro-ael-std-exten-ael -- Added extension 'a' priority 2 to macro-ael-std-exten-ael -- Added extension 'a' priority 3 to macro-ael-std-exten-ael -- Added extension '_sw-1-.' priority 10 to macro-ael-std-exten-ael -- Added extension '_sw-1-.' priority 11 to macro-ael-std-exten-ael -- Added extension 'sw-1-' priority 10 to macro-ael-std-exten-ael -- Added extension 'sw-1-BUSY' priority 10 to macro-ael-std-exten-ael -- Added extension 'sw-1-BUSY' priority 11 to macro-ael-std-exten-ael -- Added extension 's' priority 1 to ael-demo -- Added extension 's' priority 2 to ael-demo -- Added extension 's' priority 3 to ael-demo -- Added extension 's' priority 4 to ael-demo -- Added extension 's' priority 5 to ael-demo -- Added extension 's' priority 6 to ael-demo -- Added extension 's' priority 7 to ael-demo -- Added extension 's' priority 8 to ael-demo -- Added extension 's' priority 9 to ael-demo -- Added extension 's' priority 10 to ael-demo -- Added extension 's' priority 11 to ael-demo -- Added extension 's' priority 12 to ael-demo -- Added extension '2' priority 1 to ael-demo -- Added extension '2' priority 2 to ael-demo -- Added extension '3' priority 1 to ael-demo -- Added extension '3' priority 2 to ael-demo -- Added extension '1000' priority 1 to ael-demo -- Added extension '500' priority 1 to ael-demo -- Added extension '500' priority 2 to ael-demo -- Added extension '500' priority 3 to ael-demo -- Added extension '500' priority 4 to ael-demo -- Added extension '600' priority 1 to ael-demo -- Added extension '600' priority 2 to ael-demo -- Added extension '600' priority 3 to ael-demo -- Added extension '600' priority 4 to ael-demo -- Added extension '_1234' priority 1 to ael-demo -- Added extension '8500' priority 1 to ael-demo -- Added extension '8500' priority 2 to ael-demo -- Added extension '#' priority 1 to ael-demo -- Added extension '#' priority 2 to ael-demo -- Added extension 't' priority 1 to ael-demo -- Added extension 'i' priority 1 to ael-demo [Oct 26 22:48:22] NOTICE[17679]: pbx_ael.c:4490 pbx_load_module: AEL load process: compiled config file name '/etc/asterisk/extensions.ael'. [Oct 26 22:48:22] NOTICE[17679]: pbx_ael.c:4493 pbx_load_module: AEL load process: merged config file name '/etc/asterisk/extensions.ael'. [Oct 26 22:48:22] NOTICE[17679]: pbx_ael.c:4496 pbx_load_module: AEL load process: verified config file name '/etc/asterisk/extensions.ael'. pbx_ael.so => (Asterisk Extension Language Compiler) == Registered application 'TestClient' == Registered application 'TestServer' app_test.so => (Interface Test Application) == Registered application 'LookupCIDName' app_lookupcidname.so => (Look up CallerID Name from local database) == Registered file format sln, extension(s) sln|raw format_sln.so => (Raw Signed Linear Audio support (SLN)) == Parsing '/etc/asterisk/cdr_pgsql.conf': Found cdr_pgsql.so => (PostgreSQL CDR Backend) == Registered custom function URIDECODE == Registered custom function URIENCODE func_uri.so => (URI encode/decode dialplan functions) == Parsing '/etc/asterisk/codecs.conf': Found -- codec_gsm: using generic PLC == Registered translator 'gsmtolin' from format gsm to slin, cost 9 == Registered translator 'lintogsm' from format slin to gsm, cost 14 codec_gsm.so => (GSM Coder/Decoder) == Registered application 'Milliwatt' app_milliwatt.so => (Digital Milliwatt (mu-law) Test Application) == Registered application 'SoftHangup' app_softhangup.so => (Hangs up the requested channel) == Parsing '/etc/asterisk/codecs.conf': Found -- codec_zap: using generic PLC [Oct 26 22:48:22] ERROR[17679]: codec_dahdi.c:427 find_transcoders: Failed to open /dev/zap/transcode: No such file or directory codec_dahdi.so => (Generic DAHDI Transcoder Codec Translator) [Oct 26 22:48:22] NOTICE[17679]: chan_irlp.c:1998 load_module: Unable to load config irlp.conf == Registered application 'WaitForRing' app_waitforring.so => (Waits until first ring after time) == Registered format 'jpg' (JPEG (Joint Picture Experts Group)) format_jpeg.so => (JPEG (Joint Picture Experts Group) Image Format) == Parsing '/etc/asterisk/meetme.conf': Found == Parsing '/etc/asterisk/sla.conf': Found == Manager registered action MeetmeMute == Manager registered action MeetmeUnmute == Registered application 'MeetMeAdmin' == Registered application 'MeetMeCount' == Registered application 'MeetMe' == Registered application 'SLAStation' == Registered application 'SLATrunk' app_meetme.so => (MeetMe conference bridge) == Registered file format wav49, extension(s) WAV|wav49 format_wav_gsm.so => (Microsoft WAV format (Proprietary GSM)) == Registered custom function CUT == Registered custom function SORT func_cut.so => (Cut out information from a string) == Registered file format g723sf, extension(s) g723|g723sf format_g723.so => (G.723.1 Simple Timestamp File Format) == Registered application 'ZapScan' == Registered application 'DAHDIScan' app_dahdiscan.so => (Scan Zap channels application) == Registered application 'Read' app_read.so => (Read Variable Application) == Registered application 'SayUnixTime' == Registered application 'DateTime' app_sayunixtime.so => (Say time) == Registered custom function REALTIME func_realtime.so => (Read/Write values from a RealTime repository) == Registered file format vox, extension(s) vox format_vox.so => (Dialogic VOX (ADPCM) File Format) == Registered application 'ZapBarge' app_dahdibarge.so => (Barge in on channel application) == Registered application 'SendImage' app_image.so => (Image Transmission Application) == Parsing '/etc/asterisk/cdr.conf': Found cdr_csv.so => (Comma Separated Values CDR Backend) == Registered application 'ZapSendKeypadFacility' == Parsing '/etc/asterisk/zapata.conf': Found -- Registered channel 1, FXO Kewlstart signalling -- Registered channel 2, FXO Kewlstart signalling -- Automatically generated pseudo channel == Parsing '/etc/asterisk/users.conf': Found == Registered channel type 'Zap' (DAHDI Telephony Driver w/PRI) == Manager registered action ZapTransfer == Manager registered action ZapHangup == Manager registered action ZapDialOffHook == Manager registered action ZapDNDon == Manager registered action ZapDNDoff == Manager registered action ZapShowChannels == Manager registered action ZapRestart chan_dahdi.so => (DAHDI Telephony w/PRI) == Registered application 'ControlPlayback' app_controlplayback.so => (Control Playback Application) [Oct 26 22:48:23] NOTICE[17679]: app_gps.c:430 load_module: Unable to load config gps.conf == Registered application 'ParkAndAnnounce' app_parkandannounce.so => (Call Parking and Announce Application) == Registered application 'MP3Player' app_mp3.so => (Silly MP3 Application) == Registered application 'Zapateller' app_zapateller.so => (Block Telemarketers with Special Information Tone) Asterisk Ready. *CLI> == Parsing '/etc/asterisk/rpt.conf': Found -- Loading initial config for repeater 2134 == Parsing '/etc/asterisk/rpt.conf': Found [Oct 26 22:48:23] NOTICE[17714]: app_rpt.c:19094 rpt_master: Normal Repeater Init 2134 -- Re-Loading config for repeater 2134 == Parsing '/etc/asterisk/rpt.conf': Found ERROR: numrxcodes != numtxcodes -- rpt (Rx) initiating call to Radio/usb on Radio/usb -- Loading initial config for repeater 20040 == Parsing '/etc/asterisk/rpt.conf': Found [Oct 26 22:48:23] NOTICE[17714]: app_rpt.c:19094 rpt_master: Normal Repeater Init 20040 -- Re-Loading config for repeater 20040 == Parsing '/etc/asterisk/rpt.conf': Found -- rpt (Rx) initiating call to Radio/usb1 on Radio/usb1 == Set device 1-2 to usb == Set device 1-1 to usb1 ERROR: numrxcodes != numtxcodes == Parsing '/etc/asterisk/usbradio_tune_usb.conf': == Parsing '/etc/asterisk/usbradio_tune_usb1.conf': Found Found [Oct 26 22:48:23] WARNING[17718]: chan_usbradio.c:1449 hidthread: Loaded parameters from usbradio_tune_usb.conf for device usb . [Oct 26 22:48:23] WARNING[17720]: chan_usbradio.c:1449 hidthread: Loaded parameters from usbradio_tune_usb1.conf for device usb1 . Segmentation fault

3 2

Radio to Radio communication
by Zstart Zstar 27 Oct '11

27 Oct '11

Dear All, I am newbie to app_rpt. I have a basic question, I have searched about it, but I could not find an appropriate solution. I have two radios which works in different frequency bands. Both are connected to Asterisk using URI. Reverse Autopatch is working fine from PSTN to the both radios. I want to establish a call between the radios. My question is that "is is possible to configure app_rpt to act as a bidirectional bridge between two radios?", i.e., when radio 1 activates PTT, its TX audio is transferred to radio 2 and vice versa. Any recommendation/answer would be appreciated. Thanks in advance. -- Best Regards. Matteo.

1 1