- App_rpt-users - lists.keekles.org

Re: [App_rpt-users] RANGER network
by Bryan D. Boyle 11 Nov '11

11 Nov '11

On 11/11/11 2:33 PM, Lu Vencl wrote: > Can't find the Facebook page using your instructions below. Thanks for making this happen! Try...https://www.facebook.com/groups/297751646911286/ Don't thank me...thank Jim for the coding work. (And I like the <soapbox> tag...:)) > -- Bryan In this world, you must be oh so smart or oh so pleasant. Well, for years I was smart. I recommend pleasant. You may quote me. Sent from my MacBook Pro.

2 2

Install Borks at H323
by Ken Page 09 Nov '11

09 Nov '11

Anyone know this one? Install bombs at chan_h323. Also prevously at cdr_pgsql & cdr_sqlite But it got past that when I added them to MENUSELECT_CDR. Not so for the H323. Previously I had run this same compile over an old install and it worked that time. But we are currently rebuilding the system to get a lot of stuff up to date and now I am getting this issue. Oh I did emerge net-libs/openh323 Latest version available: 1.18.0 Latest version installed: 1.18.0 But this didn't help. Any idea's? ~Ken - vk4akp .-.-. menuselect.makeopts MENUSELECT_CDR=cdr_tds cdr_radius cdr_odbc cdr_pgsql cdr_sqlite chan_h323 -- menuselect/menuselect --check-deps menuselect.makeopts member 'chan_h323' in category 'MENUSELECT_CDR' not found, ignoring. *********************************************************** The existing menuselect.makeopts file did not specify that 'chan_h323' should not be included. However, either some dependencies for this module were not found or a conflict exists. Either run 'make menuselect' or remove the existing menuselect.makeopts file to resolve this issue. *********************************************************** make[1]: *** [menuselect.makeopts] Error 255 make[1]: Leaving directory `/usr/src/asterisk/trunk/asterisk' make: *** [llastate/asterisk-installed] Error 2

1 0

Install scripts
by KB7RSI 08 Nov '11

08 Nov '11

Hello all Is there somewhere I can download the scripts that are on the CentOS 5 install disk that installs the initial asterisk packages? Im trying this on a different type of system just for experimenting on my home network. Thanks Harold Kb7rsi -----Original Message----- From: app_rpt-users-bounces(a)ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Ken Sent: Tuesday, November 08, 2011 6:31 PM To: 'Bote Man'; App_rpt-users(a)ohnosec.org Subject: Re: [App_rpt-users] USB protection The other option is to hardwire (grounded/bonded/etc) the computer and URI all together with short leads and then put your isolation on the Ethernet side of things. (You could use wireless, but I think that is asking for trouble). Gigabit Ethernet fiber optic media converters are not that expensive on eBay ... I use several of them here. GL Ken > -----Original Message----- > From: app_rpt-users-bounces(a)ohnosec.org [mailto:app_rpt-users- > bounces(a)ohnosec.org] On Behalf Of Bote Man > Sent: Tuesday, November 08, 2011 9:11 PM > To: App_rpt-users(a)ohnosec.org > Subject: Re: [App_rpt-users] USB protection > > Maybe you ought to order just 1 for testing. I read in the URI > write-up that just because it says USB 2.0 doesn't mean that it can > keep up the data rate required: _______________________________________________ App_rpt-users mailing list App_rpt-users(a)ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

2 2

USB protection
by Lu Vencl 08 Nov '11

08 Nov '11

Just got this from a fellow ham. Good for repeater sites. I am ordering 7. https://www.usconverters.com/index.php?main_page=product_info&cPath=67&prod… Sent from my iPhone, Lu Vencl

4 3

Node Request Mess Up
by Matt Roberts 08 Nov '11

08 Nov '11

I'm doing the requests for my two nodes. I put in the first request correctly, but I messed up the second time. The second node is supposed to be a remote base, but I think I set it as a regular node. Can I change this once the number is assigned, or do I have to request another one? Matt Roberts n9gmr(a)me.com

2 1

REmote Base adn Echolink Questions
by Matt Roberts 08 Nov '11

08 Nov '11

I looked at the information about remote base configuration, but my question is not answered there. Here's the situation. I want my remote base to have access codes for every user to connect. A user connects, and enters the access code so they can log-in. Then the remote is tuned to whatever frequency and any options are set. Once that's done, how can I ensure someone who isn't authorized changing the base? The only way I see a person can log-out is to disconnect. Is this correct? I want Echolink connectivity on my repeater. Can I set the repeater so my courtesy tones, IDs, and such don't get heard on Echolink stations connecting? Matt Roberts n9gmr(a)me.com

2 1

AGI via app_rpt?
by Stephen A. Misel 08 Nov '11

08 Nov '11

Hi folks. Is there a way to kick off an AGI via app_rpt without involving a dialplan entry and using the autopatch? Thanks & 73, Steve K4WEB -- Stephen A. Misel Senior Professional Services Engineer Fonality, Inc. +1.310.861.4300 x7088

3 3

first node and newbie help
by Little Denver 08 Nov '11

08 Nov '11

So my dad and i are trying to get a mini itx setup for the 5th wheel so he can use it when he travels. We set up the information on allstarlink's web site, installed acid, got the download and config file done, connected the uri ( green light is flashing ), followed the schematic for connection frs/grms so we could use a spare ft-60 ( since he is just going from his pickup to the 5th wheel ) booted up the machine and are unable to get any return commands. the node shows to be active, 28134. we can communicate from one radio to another, but nothing is returned. even when we request time or system info. any help advice or trick would be greatly appreciated -- Thanks & 73, Denver Little KF5EFG

2 5

Planning an Allstar System
by Matt Roberts 07 Nov '11

07 Nov '11

I'm planning my Allstar system installation. It'll be a couple months or so before I get the system running, but want to learn as much as I can now I have a few questions. My setup will consist of a repeater and at least one remote base. I want 2M and 70CM accessible via a remote base. Can I do this with one radio, or do I need to use separate radios? I want to set up my remote base so you enter a code and your callsign is announced. Once the remote is configured how the user wants, how do you prevent an unauthorized person from controlling the system? When entering remote base command codes, do you do it in one transmission, or do you press *4+node number, unkey, and then enter command+pound sign. Do you have to enter the pound sign after every command sequence? The web page for remote base configuration recommends radios to use. Those radios aren't being manufactured anymore. What are people using for remote base radios? I would like my remote base to be frequency agile if possible. My last question is about courtesy tones. When the repeater is not connected I want to have a "K" sent as a tone. When my system is connected to a remote node, I want to have a sound like a dial tone sent for local transmissions, and a double dial tone sound for remote transmissions. Can I do this? Matt Roberts n9gmr(a)me.com Call Sign N9GMR IRLP 4515 EchoLink 45153

3 2

Echolink channel driver
by Mike - KK4ECD 07 Nov '11

07 Nov '11

Hi all, Been experimenting with echolink.conf, and have conference *EKOSTAR* running based on that configuration file. Only one problem. as soon as I set confmode to =yes, it throws segmentation faults. So presently I'm running it under confmode=no. Any bright ideas? Included below is the error it throws. Many thanks in advance for any help you can provide. Best, Mike K4NUK sealink1*CLI> Disconnected from Asterisk server /usr/sbin/safe_asterisk: line 125: 3687 Segmentation fault (core dumped) nice -n $PRIORITY ${ASTSBINDIR}/asterisk -f ${CLIARGS} ${ASTARGS} >&/dev/${TTY} < /dev/${TTY} Asterisk ended with exit status 139 [root@sealink1 asterisk]# Asterisk exited on signal 11. Automatically restarting Asterisk. mpg123: no process killed /usr/sbin/safe_asterisk: line 125: 3794 Segmentation fault (core dumped) nice -n $PRIORITY ${ASTSBINDIR}/asterisk -f ${CLIARGS} ${ASTARGS} >&/dev/${TTY} < /dev/${TTY} Asterisk ended with exit status 139 Asterisk exited on signal 11. Automatically restarting Asterisk. [root@sealink1 asterisk]# vi echolinmpg123: no process killed k.conf [root@sealink1 asterisk]# service /usr/sbin/safe_asterisk: line 125: 3906 Segmentation fault (core dumped) nice -n $PRIORITY ${ASTSBINDIR}/asterisk -f ${CLIARGS} ${ASTARGS} >&/dev/${TTY} < /dev/${TTY} Asterisk ended with exit status 139 Asterisk exited on signal 11. Automatically restarting Asterisk. asterisk mpg123: no process killed

6 12