- App_rpt-users - lists.keekles.org

Pickle.img
by Neal Garbenis 04 Sep '11

04 Sep '11

Im Setting up two more beagle boards I am having a problem after the firsttime script runs. Once the network interface is configured and the system reboots it can no longer find the file system. Anybody have any ideas? Neal Sent from my iPhone

1 0

streaming audio, outstreamcmd
by Chris (KB2FAF) 04 Sep '11

04 Sep '11

Hi, I have been trying to get outstreamcmd to work with ezstream. At this point, I have exhausted all my google search options... Interestingly I have tried it with the latest Acid install and also with Xipar with separate results, but neither work. I know that lame and ezstream are installed correctly because I can stream .wav files to my icecast server. On my Acid install, ezstream will run using 100 percent cpu and not connect to my icecast server. On Xipar, ezstream is not even called...here is what I have for the command in rpt.conf... outstreamcmd=/bin/sh,-c,/usr/bin/lame --preset cbr 16 -r -m m -s 8.0 --bitwidth 16 - - | /usr/bin/ezstream -c /etc/ezstream.xml I adjusted directories for lame and ezstream as appropriate... Thank you! Chris

1 0

Parallel port I/O with chan_simpleusb/usbradio under Limey Linux
by Jim Duuuude 01 Sep '11

01 Sep '11

Has anyone ever successfully used the PPIO (*not* GPIO) extensions of chan_usbradio and/or chan_simpleusb under Limey Linux?? I think I have run into one of those famous old "how in the world did this EVER work" sorta things. I dont think it did. If anyone has, please let me know. JIM WB6NIL

4 13

Cw/voice I'd
by Neal Garbenis 01 Sep '11

01 Sep '11

I was wondering if there was a way to rotate the way app rpt ids I would like to have both cw and voice but rotate every other time they identify. Similar to some hardware based controllers. Neal NG8Y Sent from my iPhone

1 0

Completing install w/o URI in place
by Tony KT9AC 31 Aug '11

31 Aug '11

I'm helping to do a remote install of a new node, but we don't have the URIx attached yet (just ordered it). Is it possible to just allow my friend to complete the CentOS and post install with our node number to get it on the network? The hardware should be ready in a few days for that node, then we'll finish the config at that time. Thanks, Tony

2 2

voice announcements
by George Csahanin 31 Aug '11

31 Aug '11

I have been over the archive of this mail list, thru the web sire how to's, and need to ask. Is there a way to disable the voice announcements? I have one link that stays nailed up to a base station where somne seniors are listening and they get bothered by the voice announcement when connects and disconnects happen. And I've had some wiggles on the power here that caused Limey to reboot, and then at 6AM they get the message and it wakes them up. You have to understand folks almost 90 years old...phone calls after 9PM or before 8AM=sombody died, etc. Same thing with these voice announcements...it breaks the peace. I tried simply changing the name on the directory the gsm files live in, buit then nothing would even connect. So that didn't fly... GeorgeC George J Csahanin W2DB Cedar Park, TX

3 3

Updated UDEV now Asterisk Radio stuff is dead. :(
by Ken Page 31 Aug '11

31 Aug '11

Hi guys, Just updated udev on the system and now all the Asterisk radio stuff won't load. I've discovered that they have renamed the USB device names in the latest udev. Instead of /dev/usb /dev/usb1 /dev/usb2 I now have /dev/usbmon0 /dev/usbmon1 /dev/usbmon2 Someone give me a hint as to what the fix is please? -- [Aug 31 09:51:14] WARNING[7695]: chan_usbradio.c:1449 hidthread: Loaded parameters from usbradio_tune_usb.conf for device usb . [Aug 31 09:51:14] WARNING[7695]: chan_usbradio.c:1815 setformat: Unable to re-open DSP device 2 (usb): No such file or directory [Aug 31 09:51:14] WARNING[7702]: chan_usbradio.c:1449 hidthread: Loaded parameters from usbradio_tune_usb1.conf for device usb1 . [Aug 31 09:51:14] WARNING[7702]: chan_usbradio.c:1815 setformat: Unable to re-open DSP device 0 (usb1): No such file or directory -- Regards, Ken - vk4akp All_Star: 2134 Echolink: 7878 .-.-.

1 0

Any way to stop crossing to specific nodes?
by Lu Vencl 31 Aug '11

31 Aug '11

Howdy all, I had an incident that occurred several nights ago where one user unbenounced to him cross connected the WINSYSTEM and VOIPWX net together in the middle of the night. No matter how many times I try to explain this caution to users, they still on occasion make the error as one of the distant node might be connected to another network and it is not readily visible to the user of another node. I would like to know if there are any provisions to help prevent this from happening. For example a rule that would that if 2560 is connected, no connections to 2135 and or 3007203 (echolink node) would be allowed to be connected if there is any presence from any of the nodes tied in. I am just trying to proactively stop this from happening at least with the nodes I allow public access to. Thanks Lu Ka4EPS

6 8

OT: CISCO 7910 IP Phone
by Ramesh Dhami (VA3UV) 30 Aug '11

30 Aug '11

Hey All; If anyone has experience with setting up a CISCO 7910 IP phone, please contact me off list. Thx! Ramesh.

1 0

DTMF
by Keith 28 Aug '11

28 Aug '11

Hi all, Since the split from IRLP I now run 2 pc workstations side by side the first an IRLP node the second an All-Star node. I have added the *52 to *59 shortcuts on my DTMF functionality but would like to know if I can have a similar system to IRLP of which is to help the older users of my links who find the DTMF key presses hard to complete. An older gentleman today licensed back in August 1949 tried for almost an hour to press *3300 then the Echo link node and ended up ringing me and asking me to connect for him. As he was unkeying the microphone after each sent tone so showing him 2 key tones would be such a benefit for all. I have 25 regular connections that if the older folk are to use I would like to replicate *1 to *9 for Echo-Link stations and #1 to #9 for All-Star stations this would allow me to publish or print off 30-50 help sheets for regular users of my nodes deliver to the addresses and offer a simple demo that they would be able to cope with. Any help would be most appreciated Many thanks Keith G7DNT / M0XON IRLP: 5503 Echo link: 5503 All-Star 2498 & 27333

2 1