- App_rpt-users - lists.keekles.org

Setting up iaxRpt... any tips?
by Michael Carey 10 Sep '11

10 Sep '11

Hi Everybody, I am trying to set up iaxRpt on my laptop to link to my AllStar node. I've been following some info in the ACID System Administrators Guide (dated 2008). I've added the mentioned entries in iax.conf and extensions.conf, entering my own "secret"... I'm connecting from within the same network as the node. What do I need to enter in the accounts section of iaxRpt? I assume the "secret" gets entered in the password field, what do I put in the username field? Please help a newbie... Michael. VK5ZEA

2 2

Allstar Authentication
by Keith 09 Sep '11

09 Sep '11

Hi all, I have node 2498 that has the Echo-Link also added. When I shutdown the node last night for an hour or so it fires up fine but the authentication to All-Star takes about 10 minutes. I see my node in Green on the status page. Echo link connections work instantly but I always have a 10-15 minute wait for the All-Star to allow connectivity. I am happy to leave as is as it works after the 10 minute wait always but if I can add a host name or have a DNS fault I am happy to learn. The Router is a new Sitecom 150N router attached to a Cable modem with 100Mb Internet feed. Many thanks Keith Handscombe G7DNT Node: 2498

2 1

Limey success!
by George Csahanin 09 Sep '11

09 Sep '11

After many months of off and on again trying to make my own limey I have great success to report. I made it stock, but one twist: have support for RTL8187 USB WiFi and wireless toosl for iwconfig, etc. And needed parallel port for COS and PTT. Well Jim fixed chan_usbradio.c to fix the port problem, but I founf the issue in buildroot, as outlined in a message this AM. It compiled, kernel compiled made a CF card, stuck it in the PC I have been using and voila, booted, sees the USBWiFi, downloaded 1.1.5 source code, compiled it, used all the setup files, etc, etc, made a privae node for test 1997, and already had it connected to my 2360 node. Just plain slick. Things that I had to fiddle with: patch microperl.mk modify the config files for buildroot and kernel for the wireless stuff (did makemenuconfig in both and saved to the proper file in treunk/configs) had to fix the top MAkefile to eliminate the "-E" after sudo in two places. Didn't work on my computer. Jim! success, I'm pumped. Hope you have power out there. GeorgeC W2DB 2360

1 0

COP in CLI
by Robert A. Poff WB3AWJ 06 Sep '11

06 Sep '11

>From the CLI, i s there a way to execute COP commands that do not have a DTMF function a ssociated? Also what's the difference between "rpt fun" and "rpt fun1" ? Thanks. Robert A. Poff Loganville, PA. "Lieutenant, target the offending power boat and launch photon torpedoes" Robert A. Poff Loganville, PA. "Lieutenant, target the offending power boat and launch photon torpedoes"

2 2

Re: [App_rpt-users] Found one of my nodes "stuck" this morning
by David KE6UPI 06 Sep '11

06 Sep '11

I use Motorola radio's. They use a 16 pin connector to the URI. David On Tue, Sep 6, 2011 at 3:16 AM, Lu Vencl <vencl(a)att.net> wrote: > What is this 16 pin?**** > > ** ** > > *From:* shawpbx(a)gmail.com [mailto:shawpbx@gmail.com] *On Behalf Of *David > KE6UPI > *Sent:* Monday, September 05, 2011 9:41 PM > *To:* Lu Vencl > > *Subject:* Re: [App_rpt-users] Found one of my nodes "stuck" this morning* > *** > > ** ** > > I had something like that happened to me once. I unplugged the 16 pin from > the RX radio and it stopped. I then grounded the radios to the computer and > it never happened again. > > David**** > > On Mon, Sep 5, 2011 at 6:02 PM, Lu Vencl <vencl(a)att.net> wrote:**** > > Hmm.. One would think that a TO timer of some sort would have been thought > of in the design.**** > > This node was hung up for a long time..**** > > I will test this and see if it plays out on a node with no rf attached..** > ** > > Thanks Paul.**** > > Lu, KA4EPS**** > > **** > > *From:* app_rpt-users-bounces(a)ohnosec.org [mailto: > app_rpt-users-bounces(a)ohnosec.org] *On Behalf Of *Paul J. Agamata > *Sent:* Monday, September 05, 2011 6:14 PM > *To:* Tony KT9AC > *Cc:* app_rpt-users(a)ohnosec.org > *Subject:* Re: [App_rpt-users] Found one of my nodes "stuck" this morning* > *** > > **** > > Also, if someone is trying to remote control another node and forgot to use > the '#' character to end control, the node will be continually keyed. **** > > **** > > Paul > > Sent from Paul Agamata's iPad.**** > > > On Sep 5, 2011, at 3:26 AM, "Tony KT9AC" <kt9ac(a)ameritech.net> wrote:**** > > First thing I see is that your local receiver is always on (RPT_RXKEYED=1). > Maybe try setting your totime low and see if that helps troubleshooting. > > Whether its local repeat or a link causing your node to transmit, the > "totime" works the same. Maybe your usbradio.conf changed? > > Tony > > On 09/05/2011 07:00 AM, Lu Vencl wrote: **** > > All,**** > > Just found one of my nodes “stuck” sending out continuous transmission. No > audio coming in but I can IAXRPT to it and TX outbound..**** > > Is this a known issue? This is the first time this has happened to one of > my nodes.**** > > A simple asterisk restart fixed it, but before I did I collected a few > things..**** > > Note : The node that had the issue was 27875.. I tried connecting various > nodes to it and all had the same issue.. Continuous key up on the network. > **** > > **** > > **** > > Here is a dump idle**** > > Node Variable dump for node 27875:**** > > RPT_NUMLINKS=1**** > > RPT_LINKS=1,T27869**** > > RPT_NUMALINKS=1**** > > RPT_ALINKS=1,27869TU**** > > RPT_TXKEYED=0**** > > RPT_ETXKEYED=1**** > > RPT_RXKEYED=1**** > > RPT_AUTOPATCHUP=0**** > > -- 8 variables**** > > **** > > Here is when IAXRPT key and unkey**** > > **** > > Node Variable dump for node 27875:**** > > RPT_NUMLINKS=1**** > > RPT_LINKS=1,T27869**** > > RPT_NUMALINKS=1**** > > RPT_ALINKS=1,27869TU**** > > RPT_TXKEYED=0**** > > RPT_ETXKEYED=1**** > > RPT_RXKEYED=1**** > > RPT_AUTOPATCHUP=0**** > > -- 8 variables**** > > Node Variable dump for node 27875:**** > > RPT_NUMLINKS=1**** > > RPT_LINKS=1,T27869**** > > RPT_NUMALINKS=1**** > > RPT_ALINKS=1,27869TU**** > > RPT_TXKEYED=0**** > > RPT_ETXKEYED=1**** > > RPT_RXKEYED=1**** > > RPT_AUTOPATCHUP=0**** > > -- 8 variables**** > > Node Variable dump for node 27875:**** > > RPT_TXKEYED=1**** > > RPT_NUMLINKS=1**** > > RPT_LINKS=1,T27869**** > > RPT_NUMALINKS=1**** > > RPT_ALINKS=1,27869TU**** > > RPT_ETXKEYED=1**** > > RPT_RXKEYED=1**** > > RPT_AUTOPATCHUP=0**** > > -- 8 variables**** > > -- Hungup 'Zap/pseudo-783915429'**** > > Node Variable dump for node 27875:**** > > RPT_TXKEYED=0**** > > RPT_NUMLINKS=1**** > > RPT_LINKS=1,T27869**** > > RPT_NUMALINKS=1**** > > RPT_ALINKS=1,27869TU**** > > RPT_ETXKEYED=1**** > > RPT_RXKEYED=1**** > > RPT_AUTOPATCHUP=0**** > > -- 8 variables**** > > Here is a dump with an incoming signal on the network side coming in and > back out.**** > > **** > > Node Variable dump for node 27875:**** > > RPT_TXKEYED=1**** > > RPT_NUMLINKS=1**** > > RPT_LINKS=1,T27869**** > > RPT_NUMALINKS=1**** > > RPT_ALINKS=1,27869TU**** > > RPT_ETXKEYED=1**** > > RPT_RXKEYED=1**** > > RPT_AUTOPATCHUP=0**** > > -- 8 variables**** > > -- Hungup 'Zap/pseudo-1634701108'**** > > Node Variable dump for node 27875:**** > > RPT_TXKEYED=0**** > > RPT_NUMLINKS=1**** > > RPT_LINKS=1,T27869**** > > RPT_NUMALINKS=1**** > > RPT_ALINKS=1,27869TU**** > > RPT_ETXKEYED=1**** > > RPT_RXKEYED=1**** > > RPT_AUTOPATCHUP=0**** > > -- 8 variables**** > > **** > > **** > > Here is a dump with radio debug**** > > **** > > [root@KA4EPS-R-LAKEWORTH ~]# asterisk -r**** > > Asterisk , Copyright (C) 1999 - 2008 Digium, Inc. and others.**** > > Created by Mark Spencer < <markster(a)digium.com>markster(a)digium.com>**** > > Asterisk comes with ABSOLUTELY NO WARRANTY; type 'core show warranty' for > details.**** > > This is free software, with components licensed under the GNU General > Public**** > > License version 2 and other licenses; you are welcome to redistribute it > under**** > > certain conditions. Type 'core show license' for details.**** > > =========================================================================* > *** > > Connected to Asterisk currently running on KA4EPS-R-LAKEWORTH (pid = 2073) > **** > > Verbosity is at least 10**** > > Core debug is at least 100**** > > [Sep 5 04:35:50] WARNING[8966]: chan_iax2.c:10127 iax2_do_register: > REGISTER-LOG: Sending registration request for '27875'**** > > [Sep 5 04:35:50] WARNING[8963]: chan_iax2.c:7690 registry_rerequest: > REGISTER-LOG: registry rereqquest**** > > KA4EPS-R-LAKEWORTH*CLI> radio active usb27875**** > > Active (command) USB Radio device set to [usb27875]**** > > KA4EPS-R-LAKEWORTH*CLI> radio set debug**** > > usbradio debug on.*CLI> **** > > [Sep 5 04:36:12] NOTICE[8956]: chan_echolink.c:2179 sendcmd: Received OK > from Echolink server server1.echolink.org**** > > [Sep 5 04:36:12] NOTICE[8958]: chan_echolink.c:2179 sendcmd: Received OK > from Echolink server server1.echolink.org**** > > [Sep 5 04:36:12] NOTICE[8958]: chan_echolink.c:2484 do_el_directory: > Directory pgm done downloading(partial,compressed), 538 records**** > > Node Variable dump for node 27875:**** > > RPT_NUMLINKS=1**** > > RPT_LINKS=1,T27869**** > > RPT_NUMALINKS=1**** > > RPT_ALINKS=1,27869TK**** > > RPT_TXKEYED=0**** > > RPT_ETXKEYED=1**** > > RPT_RXKEYED=1**** > > RPT_AUTOPATCHUP=0**** > > -- 8 variables**** > > Node Variable dump for node 27875:**** > > RPT_NUMLINKS=1**** > > RPT_LINKS=1,T27869**** > > RPT_NUMALINKS=1**** > > RPT_ALINKS=1,27869TU**** > > RPT_TXKEYED=0**** > > RPT_ETXKEYED=1**** > > RPT_RXKEYED=1**** > > RPT_AUTOPATCHUP=0**** > > -- 8 variables**** > > Node Variable dump for node 27875:**** > > RPT_TXKEYED=1**** > > RPT_NUMLINKS=1**** > > RPT_LINKS=1,T27869**** > > RPT_NUMALINKS=1**** > > RPT_ALINKS=1,27869TU**** > > RPT_ETXKEYED=1**** > > RPT_RXKEYED=1**** > > RPT_AUTOPATCHUP=0**** > > -- 8 variables**** > > chan_usbradio ACRK dev=usb27875 code=(null) TX ON **** > > [Sep 5 04:36:15] NOTICE[8978]: chan_usbradio.c:2690 usbradio_read: txPttIn > = 1, chan Radio/usb27875**** > > [Sep 5 04:36:15] NOTICE[8978]: chan_usbradio.c:2707 usbradio_read: > txPttOut = 1, chan Radio/usb27875**** > > [Sep 5 04:36:15] NOTICE[8978]: chan_usbradio.c:3013 usbradio_read: > dev=usb27875 got b.txCtcssReady 103.5**** > > -- Hungup 'Zap/pseudo-178868053'**** > > chan_usbradio ACRUK dev=usb27875 TX OFF >> **** > > Node Variable dump for node 27875:**** > > RPT_TXKEYED=0**** > > RPT_NUMLINKS=1**** > > RPT_LINKS=1,T27869**** > > RPT_NUMALINKS=1**** > > RPT_ALINKS=1,27869TU**** > > RPT_ETXKEYED=1**** > > RPT_RXKEYED=1**** > > RPT_AUTOPATCHUP=0**** > > -- 8 variables**** > > [Sep 5 04:36:16] NOTICE[8978]: chan_usbradio.c:2696 usbradio_read: txPttIn > = 0, chan Radio/usb27875**** > > [Sep 5 04:36:17] NOTICE[8978]: chan_usbradio.c:2707 usbradio_read: > txPttOut = 0, chan Radio/usb27875**** > > [Sep 5 04:36:17] NOTICE[8978]: chan_usbradio.c:3013 usbradio_read: > dev=usb27875 got b.txCtcssReady **** > > Node Variable dump for node 27875:**** > > RPT_NUMLINKS=1**** > > RPT_LINKS=1,T27869**** > > RPT_NUMALINKS=1**** > > RPT_ALINKS=1,27869TK**** > > RPT_TXKEYED=0**** > > RPT_ETXKEYED=1**** > > RPT_RXKEYED=1**** > > RPT_AUTOPATCHUP=0**** > > -- 8 variables**** > > Node Variable dump for node 27875:**** > > RPT_NUMLINKS=0**** > > RPT_LINKS=0**** > > RPT_NUMALINKS=0**** > > RPT_ALINKS=0**** > > RPT_TXKEYED=0**** > > RPT_ETXKEYED=1**** > > RPT_RXKEYED=1**** > > RPT_AUTOPATCHUP=0**** > > -- 8 variables**** > > -- Hungup 'IAX2/99.45.143.77:4569-5844'**** > > -- Hungup 'Zap/pseudo-1656340268'**** > > Node Variable dump for node 27875:**** > > RPT_TXKEYED=1**** > > RPT_NUMLINKS=0**** > > RPT_LINKS=0**** > > RPT_NUMALINKS=0**** > > RPT_ALINKS=0**** > > RPT_ETXKEYED=1**** > > RPT_RXKEYED=1**** > > RPT_AUTOPATCHUP=0**** > > -- 8 variables**** > > chan_usbradio ACRK dev=usb27875 code=(null) TX ON **** > > [Sep 5 04:36:30] NOTICE[8978]: chan_usbradio.c:2690 usbradio_read: txPttIn > = 1, chan Radio/usb27875**** > > [Sep 5 04:36:30] NOTICE[8978]: chan_usbradio.c:2707 usbradio_read: > txPttOut = 1, chan Radio/usb27875**** > > [Sep 5 04:36:30] NOTICE[8978]: chan_usbradio.c:3013 usbradio_read: > dev=usb27875 got b.txCtcssReady 103.5**** > > -- <Zap/pseudo-787481828> Playing 'rpt/node' (language 'en')**** > > -- <Zap/pseudo-787481828> Playing 'digits/2' (language 'en')**** > > -- <Zap/pseudo-787481828> Playing 'digits/7' (language 'en')**** > > -- <Zap/pseudo-787481828> Playing 'digits/8' (language 'en')**** > > -- <Zap/pseudo-787481828> Playing 'digits/6' (language 'en')**** > > -- <Zap/pseudo-787481828> Playing 'digits/9' (language 'en')**** > > -- <Zap/pseudo-787481828> Playing 'rpt/remote_disc' (language 'en')*** > * > > -- Hungup 'Zap/pseudo-787481828'**** > > chan_usbradio ACRUK dev=usb27875 TX OFF >> **** > > Node Variable dump for node 27875:**** > > RPT_TXKEYED=0**** > > RPT_NUMLINKS=0**** > > RPT_LINKS=0**** > > RPT_NUMALINKS=0**** > > RPT_ALINKS=0**** > > RPT_ETXKEYED=1**** > > RPT_RXKEYED=1**** > > RPT_AUTOPATCHUP=0**** > > -- 8 variables**** > > [Sep 5 04:36:37] NOTICE[8978]: chan_usbradio.c:2696 usbradio_read: txPttIn > = 0, chan Radio/usb27875**** > > [Sep 5 04:36:38] NOTICE[8978]: chan_usbradio.c:2707 usbradio_read: > txPttOut = 0, chan Radio/usb27875**** > > [Sep 5 04:36:38] NOTICE[8978]: chan_usbradio.c:3013 usbradio_read: > dev=usb27875 got b.txCtcssReady **** > > [Sep 5 04:36:40] WARNING[8967]: chan_iax2.c:10127 iax2_do_register: > REGISTER-LOG: Sending registration request for '27875'**** > > [Sep 5 04:36:40] WARNING[8962]: chan_iax2.c:7690 registry_rerequest: > REGISTER-LOG: registry rereqquest**** > > -- Accepting UNAUTHENTICATED call from 99.45.143.77:**** > > > requested format = gsm,**** > > > requested prefs = (gsm|g726aal2|ulaw),**** > > > actual format = g726aal2,**** > > > host prefs = (g726aal2|gsm),**** > > > priority = mine**** > > -- Executing [27875@radio-secure:1] Rpt("IAX2/99.45.143.77:4569-15338", > "27875") in new stack**** > > == Parsing '/var/lib/asterisk/rpt_extnodes': Found**** > > Node Variable dump for node 27875:**** > > RPT_NUMLINKS=1H*CLI> **** > > RPT_LINKS=1,T27869I> **** > > RPT_NUMALINKS=1*CLI> **** > > RPT_ALINKS=1,27869TU **** > > RPT_TXKEYED=0TH*CLI> **** > > RPT_ETXKEYED=1H*CLI> **** > > RPT_RXKEYED=1TH*CLI> **** > > RPT_AUTOPATCHUP=0LI> **** > > -- 8 variables*CLI> **** > > == Spawn extension (radio-secure, 27875, 1) exited KEEPALIVE on > 'IAX2/99.45.143.77:4569-15338'**** > > [Sep 5 04:36:55] NOTICE[8978]: channel.c:2305 __ast_read: Dropping > incompatible voice frame on IAX2/99.45.143.77:4569-15338 of format gsm > since our native format has changed to 0x10 (g726aal2)**** > > Node Variable dump for node 27875:**** > > RPT_NUMLINKS=1**** > > RPT_LINKS=1,T27869**** > > RPT_NUMALINKS=1**** > > RPT_ALINKS=1,27869TK**** > > RPT_TXKEYED=0**** > > RPT_ETXKEYED=1**** > > RPT_RXKEYED=1**** > > RPT_AUTOPATCHUP=0**** > > -- 8 variables**** > > Node Variable dump for node 27875:**** > > RPT_TXKEYED=1**** > > RPT_NUMLINKS=1**** > > RPT_LINKS=1,T27869**** > > RPT_NUMALINKS=1**** > > RPT_ALINKS=1,27869TK**** > > RPT_ETXKEYED=1**** > > RPT_RXKEYED=1**** > > RPT_AUTOPATCHUP=0**** > > -- 8 variables**** > > chan_usbradio ACRK dev=usb27875 code=(null) TX ON **** > > [Sep 5 04:36:55] NOTICE[8978]: chan_usbradio.c:2690 usbradio_read: txPttIn > = 1, chan Radio/usb27875**** > > [Sep 5 04:36:55] NOTICE[8978]: chan_usbradio.c:2707 usbradio_read: > txPttOut = 1, chan Radio/usb27875**** > > [Sep 5 04:36:55] NOTICE[8978]: chan_usbradio.c:3013 usbradio_read: > dev=usb27875 got b.txCtcssReady 103.5**** > > Node Variable dump for node 27875:**** > > RPT_NUMLINKS=1H*CLI> **** > > RPT_LINKS=1,T27869I> **** > > RPT_NUMALINKS=1*CLI> **** > > RPT_ALINKS=1,27869TU **** > > RPT_TXKEYED=1TH*CLI> **** > > RPT_ETXKEYED=1H*CLI> **** > > RPT_RXKEYED=1TH*CLI> **** > > RPT_AUTOPATCHUP=0LI> **** > > -- 8 variables*CLI> **** > > -- <Zap/pseudo-694573800> Playing 'rpt/node' (language 'en')**** > > -- <Zap/pseudo-694573800> Playing 'digits/2' (language 'en')**** > > -- <Zap/pseudo-694573800> Playing 'digits/7' (language 'en')**** > > -- Hungup 'Zap/pseudo-1225020943'**** > > -- <Zap/pseudo-694573800> Playing 'digits/8' (language 'en')**** > > -- <Zap/pseudo-694573800> Playing 'digits/7' (language 'en')**** > > -- <Zap/pseudo-694573800> Playing 'digits/5' (language 'en')**** > > -- <Zap/pseudo-694573800> Playing 'rpt/connected' (language 'en')**** > > -- <Zap/pseudo-694573800> Playing 'digits/2' (language 'en')**** > > -- <Zap/pseudo-694573800> Playing 'rpt/node' (language 'en')**** > > -- <Zap/pseudo-694573800> Playing 'digits/2' (language 'en')**** > > -- <Zap/pseudo-694573800> Playing 'digits/7' (language 'en')**** > > -- <Zap/pseudo-694573800> Playing 'digits/8' (language 'en')**** > > -- <Zap/pseudo-694573800> Playing 'digits/6' (language 'en')**** > > -- <Zap/pseudo-694573800> Playing 'digits/9' (language 'en')**** > > -- Hungup 'Zap/pseudo-694573800'**** > > -- Hungup 'Zap/pseudo-57557424'**** > > chan_usbradio ACRUK dev=usb27875 TX OFF >> **** > > Node Variable dump for node 27875:**** > > RPT_TXKEYED=0**** > > RPT_NUMLINKS=1**** > > RPT_LINKS=1,T27869**** > > RPT_NUMALINKS=1**** > > RPT_ALINKS=1,27869TU**** > > RPT_ETXKEYED=1**** > > RPT_RXKEYED=1**** > > RPT_AUTOPATCHUP=0**** > > -- 8 variables**** > > [Sep 5 04:37:09] NOTICE[8978]: chan_usbradio.c:2696 usbradio_read: txPttIn > = 0, chan Radio/usb27875**** > > Node Variable dump for node 27875:**** > > RPT_NUMLINKS=1**** > > RPT_LINKS=1,T27869**** > > RPT_NUMALINKS=1**** > > RPT_ALINKS=1,27869TK**** > > RPT_TXKEYED=0**** > > RPT_ETXKEYED=1**** > > RPT_RXKEYED=1**** > > RPT_AUTOPATCHUP=0**** > > -- 8 variables**** > > [Sep 5 04:37:10] NOTICE[8978]: chan_usbradio.c:2707 usbradio_read: > txPttOut = 0, chan Radio/usb27875**** > > [Sep 5 04:37:10] NOTICE[8978]: chan_usbradio.c:3013 usbradio_read: > dev=usb27875 got b.txCtcssReady **** > > Node Variable dump for node 27875:**** > > RPT_NUMLINKS=1**** > > RPT_LINKS=1,T27869**** > > RPT_NUMALINKS=1**** > > RPT_ALINKS=1,27869TU**** > > RPT_TXKEYED=0**** > > RPT_ETXKEYED=1**** > > RPT_RXKEYED=1**** > > RPT_AUTOPATCHUP=0**** > > -- 8 variables**** > > Node Variable dump for node 27875:**** > > RPT_TXKEYED=1**** > > RPT_NUMLINKS=1**** > > RPT_LINKS=1,T27869**** > > RPT_NUMALINKS=1**** > > RPT_ALINKS=1,27869TU**** > > RPT_ETXKEYED=1**** > > RPT_RXKEYED=1**** > > RPT_AUTOPATCHUP=0**** > > -- 8 variables**** > > chan_usbradio ACRK dev=usb27875 code=(null) TX ON **** > > [Sep 5 04:37:12] NOTICE[8978]: chan_usbradio.c:2690 usbradio_read: txPttIn > = 1, chan Radio/usb27875**** > > [Sep 5 04:37:12] NOTICE[8978]: chan_usbradio.c:2707 usbradio_read: > txPttOut = 1, chan Radio/usb27875**** > > [Sep 5 04:37:12] NOTICE[8978]: chan_usbradio.c:3013 usbradio_read: > dev=usb27875 got b.txCtcssReady 103.5**** > > -- Hungup 'Zap/pseudo-1653099707'**** > > chan_usbradio ACRUK dev=usb27875 TX OFF >> **** > > Node Variable dump for node 27875:**** > > RPT_TXKEYED=0**** > > RPT_NUMLINKS=1**** > > RPT_LINKS=1,T27869**** > > RPT_NUMALINKS=1**** > > RPT_ALINKS=1,27869TU**** > > RPT_ETXKEYED=1**** > > RPT_RXKEYED=1**** > > RPT_AUTOPATCHUP=0**** > > -- 8 variables**** > > [Sep 5 04:37:13] NOTICE[8978]: chan_usbradio.c:2696 usbradio_read: txPttIn > = 0, chan Radio/usb27875**** > > [Sep 5 04:37:14] NOTICE[8978]: chan_usbradio.c:2707 usbradio_read: > txPttOut = 0, chan Radio/usb27875**** > > [Sep 5 04:37:14] NOTICE[8978]: chan_usbradio.c:3013 usbradio_read: > dev=usb27875 got b.txCtcssReady **** > > Node Variable dump for node 27875:**** > > RPT_NUMLINKS=1**** > > RPT_LINKS=1,T27869**** > > RPT_NUMALINKS=1**** > > RPT_ALINKS=1,27869TK**** > > RPT_TXKEYED=0**** > > RPT_ETXKEYED=1**** > > RPT_RXKEYED=1**** > > RPT_AUTOPATCHUP=0**** > > -- 8 variables**** > > Node Variable dump for node 27875:**** > > RPT_NUMLINKS=1**** > > RPT_LINKS=1,T27869**** > > RPT_NUMALINKS=1**** > > RPT_ALINKS=1,27869TU**** > > RPT_TXKEYED=0**** > > RPT_ETXKEYED=1**** > > RPT_RXKEYED=1**** > > RPT_AUTOPATCHUP=0**** > > -- 8 variables**** > > Node Variable dump for node 27875:**** > > RPT_TXKEYED=1**** > > RPT_NUMLINKS=1**** > > RPT_LINKS=1,T27869**** > > RPT_NUMALINKS=1**** > > RPT_ALINKS=1,27869TU**** > > RPT_ETXKEYED=1**** > > RPT_RXKEYED=1**** > > RPT_AUTOPATCHUP=0**** > > -- 8 variables**** > > chan_usbradio ACRK dev=usb27875 code=(null) TX ON **** > > [Sep 5 04:37:18] NOTICE[8978]: chan_usbradio.c:2690 usbradio_read: txPttIn > = 1, chan Radio/usb27875**** > > [Sep 5 04:37:18] NOTICE[8978]: chan_usbradio.c:2707 usbradio_read: > txPttOut = 1, chan Radio/usb27875**** > > [Sep 5 04:37:18] NOTICE[8978]: chan_usbradio.c:3013 usbradio_read: > dev=usb27875 got b.txCtcssReady 103.5**** > > -- Hungup 'Zap/pseudo-1462152646'**** > > chan_usbradio ACRUK dev=usb27875 TX OFF >> **** > > Node Variable dump for node 27875:**** > > RPT_TXKEYED=0**** > > RPT_NUMLINKS=1**** > > RPT_LINKS=1,T27869**** > > RPT_NUMALINKS=1**** > > RPT_ALINKS=1,27869TU**** > > RPT_ETXKEYED=1**** > > RPT_RXKEYED=1**** > > RPT_AUTOPATCHUP=0**** > > -- 8 variables**** > > [Sep 5 04:37:19] NOTICE[8978]: chan_usbradio.c:2696 usbradio_read: txPttIn > = 0, chan Radio/usb27875**** > > [Sep 5 04:37:20] NOTICE[8978]: chan_usbradio.c:2707 usbradio_read: > txPttOut = 0, chan Radio/usb27875**** > > [Sep 5 04:37:20] NOTICE[8978]: chan_usbradio.c:3013 usbradio_read: > dev=usb27875 got b.txCtcssReady **** > > Node Variable dump for node 27875:**** > > RPT_NUMLINKS=1**** > > RPT_LINKS=1,T27869**** > > RPT_NUMALINKS=1**** > > RPT_ALINKS=1,27869TK**** > > RPT_TXKEYED=0**** > > RPT_ETXKEYED=1**** > > RPT_RXKEYED=1**** > > RPT_AUTOPATCHUP=0**** > > -- 8 variables**** > > Node Variable dump for node 27875:**** > > RPT_NUMLINKS=1**** > > RPT_LINKS=1,T27869**** > > RPT_NUMALINKS=1**** > > RPT_ALINKS=1,27869TU**** > > RPT_TXKEYED=0**** > > RPT_ETXKEYED=1**** > > RPT_RXKEYED=1**** > > RPT_AUTOPATCHUP=0**** > > -- 8 variables**** > > Node Variable dump for node 27875:**** > > RPT_TXKEYED=1**** > > RPT_NUMLINKS=1**** > > RPT_LINKS=1,T27869**** > > RPT_NUMALINKS=1**** > > RPT_ALINKS=1,27869TU**** > > RPT_ETXKEYED=1**** > > RPT_RXKEYED=1**** > > RPT_AUTOPATCHUP=0**** > > -- 8 variables**** > > chan_usbradio ACRK dev=usb27875 code=(null) TX ON **** > > [Sep 5 04:37:28] NOTICE[8978]: chan_usbradio.c:2690 usbradio_read: txPttIn > = 1, chan Radio/usb27875**** > > [Sep 5 04:37:28] NOTICE[8978]: chan_usbradio.c:2707 usbradio_read: > txPttOut = 1, chan Radio/usb27875**** > > [Sep 5 04:37:28] NOTICE[8978]: chan_usbradio.c:3013 usbradio_read: > dev=usb27875 got b.txCtcssReady 103.5**** > > -- Hungup 'Zap/pseudo-588981205'**** > > chan_usbradio ACRUK dev=usb27875 TX OFF >> **** > > Node Variable dump for node 27875:**** > > RPT_TXKEYED=0**** > > RPT_NUMLINKS=1**** > > RPT_LINKS=1,T27869**** > > RPT_NUMALINKS=1**** > > RPT_ALINKS=1,27869TU**** > > RPT_ETXKEYED=1**** > > RPT_RXKEYED=1**** > > RPT_AUTOPATCHUP=0**** > > -- 8 variables**** > > [Sep 5 04:37:29] NOTICE[8978]: chan_usbradio.c:2696 usbradio_read: txPttIn > = 0, chan Radio/usb27875**** > > [Sep 5 04:37:30] NOTICE[8978]: chan_usbradio.c:2707 usbradio_read: > txPttOut = 0, chan Radio/usb27875**** > > [Sep 5 04:37:30] NOTICE[8978]: chan_usbradio.c:3013 usbradio_read: > dev=usb27875 got b.txCtcssReady **** > > [Sep 5 04:37:31] WARNING[8963]: chan_iax2.c:10127 iax2_do_register: > REGISTER-LOG: Sending registration request for '27875'**** > > [Sep 5 04:37:31] WARNING[8964]: chan_iax2.c:7690 registry_rerequest: > REGISTER-LOG: registry rereqquest**** > > [Sep 5 04:37:37] NOTICE[8978]: chan_usbradio.c:2817 usbradio_read: > rxcarrierdetect = 1, chan Radio/usb27875**** > > [Sep 5 04:38:21] WARNING[8971]: chan_iax2.c:10127 iax2_do_register: > REGISTER-LOG: Sending registration request for '27875'**** > > [Sep 5 04:38:21] WARNING[8967]: chan_iax2.c:7690 registry_rerequest: > REGISTER-LOG: registry rereqquest**** > > KA4EPS-R-LAKEWORTH*CLI>**** > > **** > > _______________________________________________**** > > App_rpt-users mailing list**** > > App_rpt-users(a)ohnosec.org**** > > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users**** > > **** > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users**** > > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users**** > > ** ** >

1 0

Found one of my nodes "stuck" this morning
by Lu Vencl 06 Sep '11

06 Sep '11

All, Just found one of my nodes "stuck" sending out continuous transmission. No audio coming in but I can IAXRPT to it and TX outbound.. Is this a known issue? This is the first time this has happened to one of my nodes. A simple asterisk restart fixed it, but before I did I collected a few things.. Note : The node that had the issue was 27875.. I tried connecting various nodes to it and all had the same issue.. Continuous key up on the network. Here is a dump idle Node Variable dump for node 27875: RPT_NUMLINKS=1 RPT_LINKS=1,T27869 RPT_NUMALINKS=1 RPT_ALINKS=1,27869TU RPT_TXKEYED=0 RPT_ETXKEYED=1 RPT_RXKEYED=1 RPT_AUTOPATCHUP=0 -- 8 variables Here is when IAXRPT key and unkey Node Variable dump for node 27875: RPT_NUMLINKS=1 RPT_LINKS=1,T27869 RPT_NUMALINKS=1 RPT_ALINKS=1,27869TU RPT_TXKEYED=0 RPT_ETXKEYED=1 RPT_RXKEYED=1 RPT_AUTOPATCHUP=0 -- 8 variables Node Variable dump for node 27875: RPT_NUMLINKS=1 RPT_LINKS=1,T27869 RPT_NUMALINKS=1 RPT_ALINKS=1,27869TU RPT_TXKEYED=0 RPT_ETXKEYED=1 RPT_RXKEYED=1 RPT_AUTOPATCHUP=0 -- 8 variables Node Variable dump for node 27875: RPT_TXKEYED=1 RPT_NUMLINKS=1 RPT_LINKS=1,T27869 RPT_NUMALINKS=1 RPT_ALINKS=1,27869TU RPT_ETXKEYED=1 RPT_RXKEYED=1 RPT_AUTOPATCHUP=0 -- 8 variables -- Hungup 'Zap/pseudo-783915429' Node Variable dump for node 27875: RPT_TXKEYED=0 RPT_NUMLINKS=1 RPT_LINKS=1,T27869 RPT_NUMALINKS=1 RPT_ALINKS=1,27869TU RPT_ETXKEYED=1 RPT_RXKEYED=1 RPT_AUTOPATCHUP=0 -- 8 variables Here is a dump with an incoming signal on the network side coming in and back out. Node Variable dump for node 27875: RPT_TXKEYED=1 RPT_NUMLINKS=1 RPT_LINKS=1,T27869 RPT_NUMALINKS=1 RPT_ALINKS=1,27869TU RPT_ETXKEYED=1 RPT_RXKEYED=1 RPT_AUTOPATCHUP=0 -- 8 variables -- Hungup 'Zap/pseudo-1634701108' Node Variable dump for node 27875: RPT_TXKEYED=0 RPT_NUMLINKS=1 RPT_LINKS=1,T27869 RPT_NUMALINKS=1 RPT_ALINKS=1,27869TU RPT_ETXKEYED=1 RPT_RXKEYED=1 RPT_AUTOPATCHUP=0 -- 8 variables Here is a dump with radio debug [root@KA4EPS-R-LAKEWORTH ~]# asterisk -r Asterisk , Copyright (C) 1999 - 2008 Digium, Inc. and others. Created by Mark Spencer <markster(a)digium.com> Asterisk comes with ABSOLUTELY NO WARRANTY; type 'core show warranty' for details. This is free software, with components licensed under the GNU General Public License version 2 and other licenses; you are welcome to redistribute it under certain conditions. Type 'core show license' for details. ========================================================================= Connected to Asterisk currently running on KA4EPS-R-LAKEWORTH (pid = 2073) Verbosity is at least 10 Core debug is at least 100 [Sep 5 04:35:50] WARNING[8966]: chan_iax2.c:10127 iax2_do_register: REGISTER-LOG: Sending registration request for '27875' [Sep 5 04:35:50] WARNING[8963]: chan_iax2.c:7690 registry_rerequest: REGISTER-LOG: registry rereqquest KA4EPS-R-LAKEWORTH*CLI> radio active usb27875 Active (command) USB Radio device set to [usb27875] KA4EPS-R-LAKEWORTH*CLI> radio set debug usbradio debug on.*CLI> [Sep 5 04:36:12] NOTICE[8956]: chan_echolink.c:2179 sendcmd: Received OK from Echolink server server1.echolink.org [Sep 5 04:36:12] NOTICE[8958]: chan_echolink.c:2179 sendcmd: Received OK from Echolink server server1.echolink.org [Sep 5 04:36:12] NOTICE[8958]: chan_echolink.c:2484 do_el_directory: Directory pgm done downloading(partial,compressed), 538 records Node Variable dump for node 27875: RPT_NUMLINKS=1 RPT_LINKS=1,T27869 RPT_NUMALINKS=1 RPT_ALINKS=1,27869TK RPT_TXKEYED=0 RPT_ETXKEYED=1 RPT_RXKEYED=1 RPT_AUTOPATCHUP=0 -- 8 variables Node Variable dump for node 27875: RPT_NUMLINKS=1 RPT_LINKS=1,T27869 RPT_NUMALINKS=1 RPT_ALINKS=1,27869TU RPT_TXKEYED=0 RPT_ETXKEYED=1 RPT_RXKEYED=1 RPT_AUTOPATCHUP=0 -- 8 variables Node Variable dump for node 27875: RPT_TXKEYED=1 RPT_NUMLINKS=1 RPT_LINKS=1,T27869 RPT_NUMALINKS=1 RPT_ALINKS=1,27869TU RPT_ETXKEYED=1 RPT_RXKEYED=1 RPT_AUTOPATCHUP=0 -- 8 variables chan_usbradio ACRK dev=usb27875 code=(null) TX ON [Sep 5 04:36:15] NOTICE[8978]: chan_usbradio.c:2690 usbradio_read: txPttIn = 1, chan Radio/usb27875 [Sep 5 04:36:15] NOTICE[8978]: chan_usbradio.c:2707 usbradio_read: txPttOut = 1, chan Radio/usb27875 [Sep 5 04:36:15] NOTICE[8978]: chan_usbradio.c:3013 usbradio_read: dev=usb27875 got b.txCtcssReady 103.5 -- Hungup 'Zap/pseudo-178868053' chan_usbradio ACRUK dev=usb27875 TX OFF >> Node Variable dump for node 27875: RPT_TXKEYED=0 RPT_NUMLINKS=1 RPT_LINKS=1,T27869 RPT_NUMALINKS=1 RPT_ALINKS=1,27869TU RPT_ETXKEYED=1 RPT_RXKEYED=1 RPT_AUTOPATCHUP=0 -- 8 variables [Sep 5 04:36:16] NOTICE[8978]: chan_usbradio.c:2696 usbradio_read: txPttIn = 0, chan Radio/usb27875 [Sep 5 04:36:17] NOTICE[8978]: chan_usbradio.c:2707 usbradio_read: txPttOut = 0, chan Radio/usb27875 [Sep 5 04:36:17] NOTICE[8978]: chan_usbradio.c:3013 usbradio_read: dev=usb27875 got b.txCtcssReady Node Variable dump for node 27875: RPT_NUMLINKS=1 RPT_LINKS=1,T27869 RPT_NUMALINKS=1 RPT_ALINKS=1,27869TK RPT_TXKEYED=0 RPT_ETXKEYED=1 RPT_RXKEYED=1 RPT_AUTOPATCHUP=0 -- 8 variables Node Variable dump for node 27875: RPT_NUMLINKS=0 RPT_LINKS=0 RPT_NUMALINKS=0 RPT_ALINKS=0 RPT_TXKEYED=0 RPT_ETXKEYED=1 RPT_RXKEYED=1 RPT_AUTOPATCHUP=0 -- 8 variables -- Hungup 'IAX2/99.45.143.77:4569-5844' -- Hungup 'Zap/pseudo-1656340268' Node Variable dump for node 27875: RPT_TXKEYED=1 RPT_NUMLINKS=0 RPT_LINKS=0 RPT_NUMALINKS=0 RPT_ALINKS=0 RPT_ETXKEYED=1 RPT_RXKEYED=1 RPT_AUTOPATCHUP=0 -- 8 variables chan_usbradio ACRK dev=usb27875 code=(null) TX ON [Sep 5 04:36:30] NOTICE[8978]: chan_usbradio.c:2690 usbradio_read: txPttIn = 1, chan Radio/usb27875 [Sep 5 04:36:30] NOTICE[8978]: chan_usbradio.c:2707 usbradio_read: txPttOut = 1, chan Radio/usb27875 [Sep 5 04:36:30] NOTICE[8978]: chan_usbradio.c:3013 usbradio_read: dev=usb27875 got b.txCtcssReady 103.5 -- <Zap/pseudo-787481828> Playing 'rpt/node' (language 'en') -- <Zap/pseudo-787481828> Playing 'digits/2' (language 'en') -- <Zap/pseudo-787481828> Playing 'digits/7' (language 'en') -- <Zap/pseudo-787481828> Playing 'digits/8' (language 'en') -- <Zap/pseudo-787481828> Playing 'digits/6' (language 'en') -- <Zap/pseudo-787481828> Playing 'digits/9' (language 'en') -- <Zap/pseudo-787481828> Playing 'rpt/remote_disc' (language 'en') -- Hungup 'Zap/pseudo-787481828' chan_usbradio ACRUK dev=usb27875 TX OFF >> Node Variable dump for node 27875: RPT_TXKEYED=0 RPT_NUMLINKS=0 RPT_LINKS=0 RPT_NUMALINKS=0 RPT_ALINKS=0 RPT_ETXKEYED=1 RPT_RXKEYED=1 RPT_AUTOPATCHUP=0 -- 8 variables [Sep 5 04:36:37] NOTICE[8978]: chan_usbradio.c:2696 usbradio_read: txPttIn = 0, chan Radio/usb27875 [Sep 5 04:36:38] NOTICE[8978]: chan_usbradio.c:2707 usbradio_read: txPttOut = 0, chan Radio/usb27875 [Sep 5 04:36:38] NOTICE[8978]: chan_usbradio.c:3013 usbradio_read: dev=usb27875 got b.txCtcssReady [Sep 5 04:36:40] WARNING[8967]: chan_iax2.c:10127 iax2_do_register: REGISTER-LOG: Sending registration request for '27875' [Sep 5 04:36:40] WARNING[8962]: chan_iax2.c:7690 registry_rerequest: REGISTER-LOG: registry rereqquest -- Accepting UNAUTHENTICATED call from 99.45.143.77: > requested format = gsm, > requested prefs = (gsm|g726aal2|ulaw), > actual format = g726aal2, > host prefs = (g726aal2|gsm), > priority = mine -- Executing [27875@radio-secure:1] Rpt("IAX2/99.45.143.77:4569-15338", "27875") in new stack == Parsing '/var/lib/asterisk/rpt_extnodes': Found Node Variable dump for node 27875: RPT_NUMLINKS=1H*CLI> RPT_LINKS=1,T27869I> RPT_NUMALINKS=1*CLI> RPT_ALINKS=1,27869TU RPT_TXKEYED=0TH*CLI> RPT_ETXKEYED=1H*CLI> RPT_RXKEYED=1TH*CLI> RPT_AUTOPATCHUP=0LI> -- 8 variables*CLI> == Spawn extension (radio-secure, 27875, 1) exited KEEPALIVE on 'IAX2/99.45.143.77:4569-15338' [Sep 5 04:36:55] NOTICE[8978]: channel.c:2305 __ast_read: Dropping incompatible voice frame on IAX2/99.45.143.77:4569-15338 of format gsm since our native format has changed to 0x10 (g726aal2) Node Variable dump for node 27875: RPT_NUMLINKS=1 RPT_LINKS=1,T27869 RPT_NUMALINKS=1 RPT_ALINKS=1,27869TK RPT_TXKEYED=0 RPT_ETXKEYED=1 RPT_RXKEYED=1 RPT_AUTOPATCHUP=0 -- 8 variables Node Variable dump for node 27875: RPT_TXKEYED=1 RPT_NUMLINKS=1 RPT_LINKS=1,T27869 RPT_NUMALINKS=1 RPT_ALINKS=1,27869TK RPT_ETXKEYED=1 RPT_RXKEYED=1 RPT_AUTOPATCHUP=0 -- 8 variables chan_usbradio ACRK dev=usb27875 code=(null) TX ON [Sep 5 04:36:55] NOTICE[8978]: chan_usbradio.c:2690 usbradio_read: txPttIn = 1, chan Radio/usb27875 [Sep 5 04:36:55] NOTICE[8978]: chan_usbradio.c:2707 usbradio_read: txPttOut = 1, chan Radio/usb27875 [Sep 5 04:36:55] NOTICE[8978]: chan_usbradio.c:3013 usbradio_read: dev=usb27875 got b.txCtcssReady 103.5 Node Variable dump for node 27875: RPT_NUMLINKS=1H*CLI> RPT_LINKS=1,T27869I> RPT_NUMALINKS=1*CLI> RPT_ALINKS=1,27869TU RPT_TXKEYED=1TH*CLI> RPT_ETXKEYED=1H*CLI> RPT_RXKEYED=1TH*CLI> RPT_AUTOPATCHUP=0LI> -- 8 variables*CLI> -- <Zap/pseudo-694573800> Playing 'rpt/node' (language 'en') -- <Zap/pseudo-694573800> Playing 'digits/2' (language 'en') -- <Zap/pseudo-694573800> Playing 'digits/7' (language 'en') -- Hungup 'Zap/pseudo-1225020943' -- <Zap/pseudo-694573800> Playing 'digits/8' (language 'en') -- <Zap/pseudo-694573800> Playing 'digits/7' (language 'en') -- <Zap/pseudo-694573800> Playing 'digits/5' (language 'en') -- <Zap/pseudo-694573800> Playing 'rpt/connected' (language 'en') -- <Zap/pseudo-694573800> Playing 'digits/2' (language 'en') -- <Zap/pseudo-694573800> Playing 'rpt/node' (language 'en') -- <Zap/pseudo-694573800> Playing 'digits/2' (language 'en') -- <Zap/pseudo-694573800> Playing 'digits/7' (language 'en') -- <Zap/pseudo-694573800> Playing 'digits/8' (language 'en') -- <Zap/pseudo-694573800> Playing 'digits/6' (language 'en') -- <Zap/pseudo-694573800> Playing 'digits/9' (language 'en') -- Hungup 'Zap/pseudo-694573800' -- Hungup 'Zap/pseudo-57557424' chan_usbradio ACRUK dev=usb27875 TX OFF >> Node Variable dump for node 27875: RPT_TXKEYED=0 RPT_NUMLINKS=1 RPT_LINKS=1,T27869 RPT_NUMALINKS=1 RPT_ALINKS=1,27869TU RPT_ETXKEYED=1 RPT_RXKEYED=1 RPT_AUTOPATCHUP=0 -- 8 variables [Sep 5 04:37:09] NOTICE[8978]: chan_usbradio.c:2696 usbradio_read: txPttIn = 0, chan Radio/usb27875 Node Variable dump for node 27875: RPT_NUMLINKS=1 RPT_LINKS=1,T27869 RPT_NUMALINKS=1 RPT_ALINKS=1,27869TK RPT_TXKEYED=0 RPT_ETXKEYED=1 RPT_RXKEYED=1 RPT_AUTOPATCHUP=0 -- 8 variables [Sep 5 04:37:10] NOTICE[8978]: chan_usbradio.c:2707 usbradio_read: txPttOut = 0, chan Radio/usb27875 [Sep 5 04:37:10] NOTICE[8978]: chan_usbradio.c:3013 usbradio_read: dev=usb27875 got b.txCtcssReady Node Variable dump for node 27875: RPT_NUMLINKS=1 RPT_LINKS=1,T27869 RPT_NUMALINKS=1 RPT_ALINKS=1,27869TU RPT_TXKEYED=0 RPT_ETXKEYED=1 RPT_RXKEYED=1 RPT_AUTOPATCHUP=0 -- 8 variables Node Variable dump for node 27875: RPT_TXKEYED=1 RPT_NUMLINKS=1 RPT_LINKS=1,T27869 RPT_NUMALINKS=1 RPT_ALINKS=1,27869TU RPT_ETXKEYED=1 RPT_RXKEYED=1 RPT_AUTOPATCHUP=0 -- 8 variables chan_usbradio ACRK dev=usb27875 code=(null) TX ON [Sep 5 04:37:12] NOTICE[8978]: chan_usbradio.c:2690 usbradio_read: txPttIn = 1, chan Radio/usb27875 [Sep 5 04:37:12] NOTICE[8978]: chan_usbradio.c:2707 usbradio_read: txPttOut = 1, chan Radio/usb27875 [Sep 5 04:37:12] NOTICE[8978]: chan_usbradio.c:3013 usbradio_read: dev=usb27875 got b.txCtcssReady 103.5 -- Hungup 'Zap/pseudo-1653099707' chan_usbradio ACRUK dev=usb27875 TX OFF >> Node Variable dump for node 27875: RPT_TXKEYED=0 RPT_NUMLINKS=1 RPT_LINKS=1,T27869 RPT_NUMALINKS=1 RPT_ALINKS=1,27869TU RPT_ETXKEYED=1 RPT_RXKEYED=1 RPT_AUTOPATCHUP=0 -- 8 variables [Sep 5 04:37:13] NOTICE[8978]: chan_usbradio.c:2696 usbradio_read: txPttIn = 0, chan Radio/usb27875 [Sep 5 04:37:14] NOTICE[8978]: chan_usbradio.c:2707 usbradio_read: txPttOut = 0, chan Radio/usb27875 [Sep 5 04:37:14] NOTICE[8978]: chan_usbradio.c:3013 usbradio_read: dev=usb27875 got b.txCtcssReady Node Variable dump for node 27875: RPT_NUMLINKS=1 RPT_LINKS=1,T27869 RPT_NUMALINKS=1 RPT_ALINKS=1,27869TK RPT_TXKEYED=0 RPT_ETXKEYED=1 RPT_RXKEYED=1 RPT_AUTOPATCHUP=0 -- 8 variables Node Variable dump for node 27875: RPT_NUMLINKS=1 RPT_LINKS=1,T27869 RPT_NUMALINKS=1 RPT_ALINKS=1,27869TU RPT_TXKEYED=0 RPT_ETXKEYED=1 RPT_RXKEYED=1 RPT_AUTOPATCHUP=0 -- 8 variables Node Variable dump for node 27875: RPT_TXKEYED=1 RPT_NUMLINKS=1 RPT_LINKS=1,T27869 RPT_NUMALINKS=1 RPT_ALINKS=1,27869TU RPT_ETXKEYED=1 RPT_RXKEYED=1 RPT_AUTOPATCHUP=0 -- 8 variables chan_usbradio ACRK dev=usb27875 code=(null) TX ON [Sep 5 04:37:18] NOTICE[8978]: chan_usbradio.c:2690 usbradio_read: txPttIn = 1, chan Radio/usb27875 [Sep 5 04:37:18] NOTICE[8978]: chan_usbradio.c:2707 usbradio_read: txPttOut = 1, chan Radio/usb27875 [Sep 5 04:37:18] NOTICE[8978]: chan_usbradio.c:3013 usbradio_read: dev=usb27875 got b.txCtcssReady 103.5 -- Hungup 'Zap/pseudo-1462152646' chan_usbradio ACRUK dev=usb27875 TX OFF >> Node Variable dump for node 27875: RPT_TXKEYED=0 RPT_NUMLINKS=1 RPT_LINKS=1,T27869 RPT_NUMALINKS=1 RPT_ALINKS=1,27869TU RPT_ETXKEYED=1 RPT_RXKEYED=1 RPT_AUTOPATCHUP=0 -- 8 variables [Sep 5 04:37:19] NOTICE[8978]: chan_usbradio.c:2696 usbradio_read: txPttIn = 0, chan Radio/usb27875 [Sep 5 04:37:20] NOTICE[8978]: chan_usbradio.c:2707 usbradio_read: txPttOut = 0, chan Radio/usb27875 [Sep 5 04:37:20] NOTICE[8978]: chan_usbradio.c:3013 usbradio_read: dev=usb27875 got b.txCtcssReady Node Variable dump for node 27875: RPT_NUMLINKS=1 RPT_LINKS=1,T27869 RPT_NUMALINKS=1 RPT_ALINKS=1,27869TK RPT_TXKEYED=0 RPT_ETXKEYED=1 RPT_RXKEYED=1 RPT_AUTOPATCHUP=0 -- 8 variables Node Variable dump for node 27875: RPT_NUMLINKS=1 RPT_LINKS=1,T27869 RPT_NUMALINKS=1 RPT_ALINKS=1,27869TU RPT_TXKEYED=0 RPT_ETXKEYED=1 RPT_RXKEYED=1 RPT_AUTOPATCHUP=0 -- 8 variables Node Variable dump for node 27875: RPT_TXKEYED=1 RPT_NUMLINKS=1 RPT_LINKS=1,T27869 RPT_NUMALINKS=1 RPT_ALINKS=1,27869TU RPT_ETXKEYED=1 RPT_RXKEYED=1 RPT_AUTOPATCHUP=0 -- 8 variables chan_usbradio ACRK dev=usb27875 code=(null) TX ON [Sep 5 04:37:28] NOTICE[8978]: chan_usbradio.c:2690 usbradio_read: txPttIn = 1, chan Radio/usb27875 [Sep 5 04:37:28] NOTICE[8978]: chan_usbradio.c:2707 usbradio_read: txPttOut = 1, chan Radio/usb27875 [Sep 5 04:37:28] NOTICE[8978]: chan_usbradio.c:3013 usbradio_read: dev=usb27875 got b.txCtcssReady 103.5 -- Hungup 'Zap/pseudo-588981205' chan_usbradio ACRUK dev=usb27875 TX OFF >> Node Variable dump for node 27875: RPT_TXKEYED=0 RPT_NUMLINKS=1 RPT_LINKS=1,T27869 RPT_NUMALINKS=1 RPT_ALINKS=1,27869TU RPT_ETXKEYED=1 RPT_RXKEYED=1 RPT_AUTOPATCHUP=0 -- 8 variables [Sep 5 04:37:29] NOTICE[8978]: chan_usbradio.c:2696 usbradio_read: txPttIn = 0, chan Radio/usb27875 [Sep 5 04:37:30] NOTICE[8978]: chan_usbradio.c:2707 usbradio_read: txPttOut = 0, chan Radio/usb27875 [Sep 5 04:37:30] NOTICE[8978]: chan_usbradio.c:3013 usbradio_read: dev=usb27875 got b.txCtcssReady [Sep 5 04:37:31] WARNING[8963]: chan_iax2.c:10127 iax2_do_register: REGISTER-LOG: Sending registration request for '27875' [Sep 5 04:37:31] WARNING[8964]: chan_iax2.c:7690 registry_rerequest: REGISTER-LOG: registry rereqquest [Sep 5 04:37:37] NOTICE[8978]: chan_usbradio.c:2817 usbradio_read: rxcarrierdetect = 1, chan Radio/usb27875 [Sep 5 04:38:21] WARNING[8971]: chan_iax2.c:10127 iax2_do_register: REGISTER-LOG: Sending registration request for '27875' [Sep 5 04:38:21] WARNING[8967]: chan_iax2.c:7690 registry_rerequest: REGISTER-LOG: registry rereqquest KA4EPS-R-LAKEWORTH*CLI>

5 7

Inbound Echolink connections flakey
by Tony KT9AC 06 Sep '11

06 Sep '11

Without the funny comments this time...I'm working on a transition plan to the Iaxrpt client. My node that's worked forever and the new node are both not allowing inbound Echolink connections, but are registered online. They worked earlier up until the time I restarted Asterisk to reload the usbconfig file. Is anyone else that's running both networks seeing any inbound connect timeouts? I'm seeing this on my console while running "asterisk -r" Sep 5 20:33:19] ERROR[17258]: chan_echolink.c:2140 sendcmd: connect() failed to connect to the Echolink server server2.echolink.org [Sep 5 20:33:19] ERROR[17260]: chan_echolink.c:2140 sendcmd: connect() failed to connect to the Echolink server server2.echolink.org [Sep 5 20:36:28] ERROR[17260]: chan_echolink.c:2338 do_el_directory: Unable to connect to directory server server2.echolink.org [Sep 5 20:36:38] ERROR[17260]: chan_echolink.c:2407 do_el_directory: Error in parsing header on server3.echolink.org [Sep 5 20:36:58] ERROR[17260]: chan_echolink.c:2407 do_el_directory: Error in parsing header on server1.echolink.org [Sep 5 20:37:08] ERROR[17258]: chan_echolink.c:2140 sendcmd: connect() failed to connect to the Echolink server server2.echolink.org [Sep 5 20:40:17] ERROR[17260]: chan_echolink.c:2140 sendcmd: connect() failed to connect to the Echolink server server2.echolink.org [Sep 5 20:40:57] ERROR[17258]: chan_echolink.c:2140 sendcmd: connect() failed to connect to the Echolink server server2.echolink.org -- Hungup 'Zap/pseudo-143176282' [Sep 5 20:43:26] ERROR[17260]: chan_echolink.c:2338 do_el_directory: Unable to connect to directory server server2.echolink.org [Sep 5 20:43:36] ERROR[17260]: chan_echolink.c:2407 do_el_directory: Error in parsing header on server3.echolink.org [Sep 5 20:43:56] ERROR[17260]: chan_echolink.c:2407 do_el_directory: Error in parsing header on server1.echolink.org In the echolink.conf file, the first line is "confmode=no" - does that need to be set to yes for any particular reason? The person reporting the issue can connect to other Echolink nodes from both a Mac and iPhone. Thanks, Tony

1 0

limey linux build
by George Csahanin 05 Sep '11

05 Sep '11

Anybody out there have any experiance building their own limey? I am not talking about compiling astsrc on it, but actually building buildroot, kernel, etc. Trying to do it here and buildroot keeps blowing up at various places (not making miniperl being one of them) I need to compare notes. George J Csahanin W2DB Cedar Park, TX

1 0

Re: [App_rpt-users] UDEV updated now USBMON0 not USB fix?
by Ken Page 05 Sep '11

05 Sep '11

Hi, Still wondering about a fix for my system since updating UDEV now /dev/usbmon0 instead of the old /dev/usb etc is displayed in the dev's directory. What's the suggested fix for this so radio interfaces load again? Regards, Ken - vk4akp All_Star: 2134 .-.-. On 9/5/2011 11:19 PM, app_rpt-users-request(a)ohnosec.org wrote: > Send App_rpt-users mailing list submissions to > app_rpt-users(a)ohnosec.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > or, via email, send a message with subject or body 'help' to > app_rpt-users-request(a)ohnosec.org > > You can reach the person managing the list at > app_rpt-users-owner(a)ohnosec.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of App_rpt-users digest..." > > > Today's Topics: > > 1. Re: Found one of my nodes "stuck" this morning (Tony KT9AC) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Mon, 05 Sep 2011 08:19:19 -0500 > From: Tony KT9AC<kt9ac(a)ameritech.net> > To: app_rpt-users(a)ohnosec.org > Subject: Re: [App_rpt-users] Found one of my nodes "stuck" this > morning > Message-ID:<4E64CC57.9070507(a)ameritech.net> > Content-Type: text/plain; charset="iso-8859-1"; Format="flowed" > > First thing I see is that your local receiver is always on > (RPT_RXKEYED=1). Maybe try setting your totime low and see if that helps > troubleshooting. > > Whether its local repeat or a link causing your node to transmit, the > "totime" works the same. Maybe your usbradio.conf changed? > > Tony > > On 09/05/2011 07:00 AM, Lu Vencl wrote: >> All, >> >> Just found one of my nodes "stuck" sending out continuous >> transmission. No audio coming in but I can IAXRPT to it and TX outbound.. >> >> Is this a known issue? This is the first time this has happened to >> one of my nodes. >> >> A simple asterisk restart fixed it, but before I did I collected a few >> things.. >> >> Note : The node that had the issue was 27875.. I tried connecting >> various nodes to it and all had the same issue.. Continuous key up on >> the network. >> >> Here is a dump idle >> >> Node Variable dump for node 27875: >> >> RPT_NUMLINKS=1 >> >> RPT_LINKS=1,T27869 >> >> RPT_NUMALINKS=1 >> >> RPT_ALINKS=1,27869TU >> >> RPT_TXKEYED=0 >> >> RPT_ETXKEYED=1 >> >> RPT_RXKEYED=1 >> >> RPT_AUTOPATCHUP=0 >> >> -- 8 variables >> >> Here is when IAXRPT key and unkey >> >> Node Variable dump for node 27875: >> >> RPT_NUMLINKS=1 >> >> RPT_LINKS=1,T27869 >> >> RPT_NUMALINKS=1 >> >> RPT_ALINKS=1,27869TU >> >> RPT_TXKEYED=0 >> >> RPT_ETXKEYED=1 >> >> RPT_RXKEYED=1 >> >> RPT_AUTOPATCHUP=0 >> >> -- 8 variables >> >> Node Variable dump for node 27875: >> >> RPT_NUMLINKS=1 >> >> RPT_LINKS=1,T27869 >> >> RPT_NUMALINKS=1 >> >> RPT_ALINKS=1,27869TU >> >> RPT_TXKEYED=0 >> >> RPT_ETXKEYED=1 >> >> RPT_RXKEYED=1 >> >> RPT_AUTOPATCHUP=0 >> >> -- 8 variables >> >> Node Variable dump for node 27875: >> >> RPT_TXKEYED=1 >> >> RPT_NUMLINKS=1 >> >> RPT_LINKS=1,T27869 >> >> RPT_NUMALINKS=1 >> >> RPT_ALINKS=1,27869TU >> >> RPT_ETXKEYED=1 >> >> RPT_RXKEYED=1 >> >> RPT_AUTOPATCHUP=0 >> >> -- 8 variables >> >> -- Hungup 'Zap/pseudo-783915429' >> >> Node Variable dump for node 27875: >> >> RPT_TXKEYED=0 >> >> RPT_NUMLINKS=1 >> >> RPT_LINKS=1,T27869 >> >> RPT_NUMALINKS=1 >> >> RPT_ALINKS=1,27869TU >> >> RPT_ETXKEYED=1 >> >> RPT_RXKEYED=1 >> >> RPT_AUTOPATCHUP=0 >> >> -- 8 variables >> >> Here is a dump with an incoming signal on the network side coming in >> and back out. >> >> Node Variable dump for node 27875: >> >> RPT_TXKEYED=1 >> >> RPT_NUMLINKS=1 >> >> RPT_LINKS=1,T27869 >> >> RPT_NUMALINKS=1 >> >> RPT_ALINKS=1,27869TU >> >> RPT_ETXKEYED=1 >> >> RPT_RXKEYED=1 >> >> RPT_AUTOPATCHUP=0 >> >> -- 8 variables >> >> -- Hungup 'Zap/pseudo-1634701108' >> >> Node Variable dump for node 27875: >> >> RPT_TXKEYED=0 >> >> RPT_NUMLINKS=1 >> >> RPT_LINKS=1,T27869 >> >> RPT_NUMALINKS=1 >> >> RPT_ALINKS=1,27869TU >> >> RPT_ETXKEYED=1 >> >> RPT_RXKEYED=1 >> >> RPT_AUTOPATCHUP=0 >> >> -- 8 variables >> >> Here is a dump with radio debug >> >> [root@KA4EPS-R-LAKEWORTH ~]# asterisk -r >> >> Asterisk , Copyright (C) 1999 - 2008 Digium, Inc. and others. >> >> Created by Mark Spencer<markster(a)digium.com> >> >> Asterisk comes with ABSOLUTELY NO WARRANTY; type 'core show warranty' >> for details. >> >> This is free software, with components licensed under the GNU General >> Public >> >> License version 2 and other licenses; you are welcome to redistribute >> it under >> >> certain conditions. Type 'core show license' for details. >> >> ========================================================================= >> >> Connected to Asterisk currently running on KA4EPS-R-LAKEWORTH (pid = >> 2073) >> >> Verbosity is at least 10 >> >> Core debug is at least 100 >> >> [Sep 5 04:35:50] WARNING[8966]: chan_iax2.c:10127 iax2_do_register: >> REGISTER-LOG: Sending registration request for '27875' >> >> [Sep 5 04:35:50] WARNING[8963]: chan_iax2.c:7690 registry_rerequest: >> REGISTER-LOG: registry rereqquest >> >> KA4EPS-R-LAKEWORTH*CLI> radio active usb27875 >> >> Active (command) USB Radio device set to [usb27875] >> >> KA4EPS-R-LAKEWORTH*CLI> radio set debug >> >> usbradio debug on.*CLI> >> >> [Sep 5 04:36:12] NOTICE[8956]: chan_echolink.c:2179 sendcmd: Received >> OK from Echolink server server1.echolink.org >> >> [Sep 5 04:36:12] NOTICE[8958]: chan_echolink.c:2179 sendcmd: Received >> OK from Echolink server server1.echolink.org >> >> [Sep 5 04:36:12] NOTICE[8958]: chan_echolink.c:2484 do_el_directory: >> Directory pgm done downloading(partial,compressed), 538 records >> >> Node Variable dump for node 27875: >> >> RPT_NUMLINKS=1 >> >> RPT_LINKS=1,T27869 >> >> RPT_NUMALINKS=1 >> >> RPT_ALINKS=1,27869TK >> >> RPT_TXKEYED=0 >> >> RPT_ETXKEYED=1 >> >> RPT_RXKEYED=1 >> >> RPT_AUTOPATCHUP=0 >> >> -- 8 variables >> >> Node Variable dump for node 27875: >> >> RPT_NUMLINKS=1 >> >> RPT_LINKS=1,T27869 >> >> RPT_NUMALINKS=1 >> >> RPT_ALINKS=1,27869TU >> >> RPT_TXKEYED=0 >> >> RPT_ETXKEYED=1 >> >> RPT_RXKEYED=1 >> >> RPT_AUTOPATCHUP=0 >> >> -- 8 variables >> >> Node Variable dump for node 27875: >> >> RPT_TXKEYED=1 >> >> RPT_NUMLINKS=1 >> >> RPT_LINKS=1,T27869 >> >> RPT_NUMALINKS=1 >> >> RPT_ALINKS=1,27869TU >> >> RPT_ETXKEYED=1 >> >> RPT_RXKEYED=1 >> >> RPT_AUTOPATCHUP=0 >> >> -- 8 variables >> >> chan_usbradio ACRK dev=usb27875 code=(null) TX ON >> >> [Sep 5 04:36:15] NOTICE[8978]: chan_usbradio.c:2690 usbradio_read: >> txPttIn = 1, chan Radio/usb27875 >> >> [Sep 5 04:36:15] NOTICE[8978]: chan_usbradio.c:2707 usbradio_read: >> txPttOut = 1, chan Radio/usb27875 >> >> [Sep 5 04:36:15] NOTICE[8978]: chan_usbradio.c:3013 usbradio_read: >> dev=usb27875 got b.txCtcssReady 103.5 >> >> -- Hungup 'Zap/pseudo-178868053' >> >> chan_usbradio ACRUK dev=usb27875 TX OFF>> >> >> Node Variable dump for node 27875: >> >> RPT_TXKEYED=0 >> >> RPT_NUMLINKS=1 >> >> RPT_LINKS=1,T27869 >> >> RPT_NUMALINKS=1 >> >> RPT_ALINKS=1,27869TU >> >> RPT_ETXKEYED=1 >> >> RPT_RXKEYED=1 >> >> RPT_AUTOPATCHUP=0 >> >> -- 8 variables >> >> [Sep 5 04:36:16] NOTICE[8978]: chan_usbradio.c:2696 usbradio_read: >> txPttIn = 0, chan Radio/usb27875 >> >> [Sep 5 04:36:17] NOTICE[8978]: chan_usbradio.c:2707 usbradio_read: >> txPttOut = 0, chan Radio/usb27875 >> >> [Sep 5 04:36:17] NOTICE[8978]: chan_usbradio.c:3013 usbradio_read: >> dev=usb27875 got b.txCtcssReady >> >> Node Variable dump for node 27875: >> >> RPT_NUMLINKS=1 >> >> RPT_LINKS=1,T27869 >> >> RPT_NUMALINKS=1 >> >> RPT_ALINKS=1,27869TK >> >> RPT_TXKEYED=0 >> >> RPT_ETXKEYED=1 >> >> RPT_RXKEYED=1 >> >> RPT_AUTOPATCHUP=0 >> >> -- 8 variables >> >> Node Variable dump for node 27875: >> >> RPT_NUMLINKS=0 >> >> RPT_LINKS=0 >> >> RPT_NUMALINKS=0 >> >> RPT_ALINKS=0 >> >> RPT_TXKEYED=0 >> >> RPT_ETXKEYED=1 >> >> RPT_RXKEYED=1 >> >> RPT_AUTOPATCHUP=0 >> >> -- 8 variables >> >> -- Hungup 'IAX2/99.45.143.77:4569-5844' >> >> -- Hungup 'Zap/pseudo-1656340268' >> >> Node Variable dump for node 27875: >> >> RPT_TXKEYED=1 >> >> RPT_NUMLINKS=0 >> >> RPT_LINKS=0 >> >> RPT_NUMALINKS=0 >> >> RPT_ALINKS=0 >> >> RPT_ETXKEYED=1 >> >> RPT_RXKEYED=1 >> >> RPT_AUTOPATCHUP=0 >> >> -- 8 variables >> >> chan_usbradio ACRK dev=usb27875 code=(null) TX ON >> >> [Sep 5 04:36:30] NOTICE[8978]: chan_usbradio.c:2690 usbradio_read: >> txPttIn = 1, chan Radio/usb27875 >> >> [Sep 5 04:36:30] NOTICE[8978]: chan_usbradio.c:2707 usbradio_read: >> txPttOut = 1, chan Radio/usb27875 >> >> [Sep 5 04:36:30] NOTICE[8978]: chan_usbradio.c:3013 usbradio_read: >> dev=usb27875 got b.txCtcssReady 103.5 >> >> --<Zap/pseudo-787481828> Playing 'rpt/node' (language 'en') >> >> --<Zap/pseudo-787481828> Playing 'digits/2' (language 'en') >> >> --<Zap/pseudo-787481828> Playing 'digits/7' (language 'en') >> >> --<Zap/pseudo-787481828> Playing 'digits/8' (language 'en') >> >> --<Zap/pseudo-787481828> Playing 'digits/6' (language 'en') >> >> --<Zap/pseudo-787481828> Playing 'digits/9' (language 'en') >> >> --<Zap/pseudo-787481828> Playing 'rpt/remote_disc' (language 'en') >> >> -- Hungup 'Zap/pseudo-787481828' >> >> chan_usbradio ACRUK dev=usb27875 TX OFF>> >> >> Node Variable dump for node 27875: >> >> RPT_TXKEYED=0 >> >> RPT_NUMLINKS=0 >> >> RPT_LINKS=0 >> >> RPT_NUMALINKS=0 >> >> RPT_ALINKS=0 >> >> RPT_ETXKEYED=1 >> >> RPT_RXKEYED=1 >> >> RPT_AUTOPATCHUP=0 >> >> -- 8 variables >> >> [Sep 5 04:36:37] NOTICE[8978]: chan_usbradio.c:2696 usbradio_read: >> txPttIn = 0, chan Radio/usb27875 >> >> [Sep 5 04:36:38] NOTICE[8978]: chan_usbradio.c:2707 usbradio_read: >> txPttOut = 0, chan Radio/usb27875 >> >> [Sep 5 04:36:38] NOTICE[8978]: chan_usbradio.c:3013 usbradio_read: >> dev=usb27875 got b.txCtcssReady >> >> [Sep 5 04:36:40] WARNING[8967]: chan_iax2.c:10127 iax2_do_register: >> REGISTER-LOG: Sending registration request for '27875' >> >> [Sep 5 04:36:40] WARNING[8962]: chan_iax2.c:7690 registry_rerequest: >> REGISTER-LOG: registry rereqquest >> >> -- Accepting UNAUTHENTICATED call from 99.45.143.77: >> >>> requested format = gsm, >>> requested prefs = (gsm|g726aal2|ulaw), >>> actual format = g726aal2, >>> host prefs = (g726aal2|gsm), >>> priority = mine >> -- Executing [27875@radio-secure:1] >> Rpt("IAX2/99.45.143.77:4569-15338", "27875") in new stack >> >> == Parsing '/var/lib/asterisk/rpt_extnodes': Found >> >> Node Variable dump for node 27875: >> >> RPT_NUMLINKS=1H*CLI> >> >> RPT_LINKS=1,T27869I> >> >> RPT_NUMALINKS=1*CLI> >> >> RPT_ALINKS=1,27869TU >> >> RPT_TXKEYED=0TH*CLI> >> >> RPT_ETXKEYED=1H*CLI> >> >> RPT_RXKEYED=1TH*CLI> >> >> RPT_AUTOPATCHUP=0LI> >> >> -- 8 variables*CLI> >> >> == Spawn extension (radio-secure, 27875, 1) exited KEEPALIVE on >> 'IAX2/99.45.143.77:4569-15338' >> >> [Sep 5 04:36:55] NOTICE[8978]: channel.c:2305 __ast_read: Dropping >> incompatible voice frame on IAX2/99.45.143.77:4569-15338 of format gsm >> since our native format has changed to 0x10 (g726aal2) >> >> Node Variable dump for node 27875: >> >> RPT_NUMLINKS=1 >> >> RPT_LINKS=1,T27869 >> >> RPT_NUMALINKS=1 >> >> RPT_ALINKS=1,27869TK >> >> RPT_TXKEYED=0 >> >> RPT_ETXKEYED=1 >> >> RPT_RXKEYED=1 >> >> RPT_AUTOPATCHUP=0 >> >> -- 8 variables >> >> Node Variable dump for node 27875: >> >> RPT_TXKEYED=1 >> >> RPT_NUMLINKS=1 >> >> RPT_LINKS=1,T27869 >> >> RPT_NUMALINKS=1 >> >> RPT_ALINKS=1,27869TK >> >> RPT_ETXKEYED=1 >> >> RPT_RXKEYED=1 >> >> RPT_AUTOPATCHUP=0 >> >> -- 8 variables >> >> chan_usbradio ACRK dev=usb27875 code=(null) TX ON >> >> [Sep 5 04:36:55] NOTICE[8978]: chan_usbradio.c:2690 usbradio_read: >> txPttIn = 1, chan Radio/usb27875 >> >> [Sep 5 04:36:55] NOTICE[8978]: chan_usbradio.c:2707 usbradio_read: >> txPttOut = 1, chan Radio/usb27875 >> >> [Sep 5 04:36:55] NOTICE[8978]: chan_usbradio.c:3013 usbradio_read: >> dev=usb27875 got b.txCtcssReady 103.5 >> >> Node Variable dump for node 27875: >> >> RPT_NUMLINKS=1H*CLI> >> >> RPT_LINKS=1,T27869I> >> >> RPT_NUMALINKS=1*CLI> >> >> RPT_ALINKS=1,27869TU >> >> RPT_TXKEYED=1TH*CLI> >> >> RPT_ETXKEYED=1H*CLI> >> >> RPT_RXKEYED=1TH*CLI> >> >> RPT_AUTOPATCHUP=0LI> >> >> -- 8 variables*CLI> >> >> -- <Zap/pseudo-694573800> Playing 'rpt/node' (language 'en') >> >> --<Zap/pseudo-694573800> Playing 'digits/2' (language 'en') >> >> --<Zap/pseudo-694573800> Playing 'digits/7' (language 'en') >> >> -- Hungup 'Zap/pseudo-1225020943' >> >> --<Zap/pseudo-694573800> Playing 'digits/8' (language 'en') >> >> --<Zap/pseudo-694573800> Playing 'digits/7' (language 'en') >> >> --<Zap/pseudo-694573800> Playing 'digits/5' (language 'en') >> >> --<Zap/pseudo-694573800> Playing 'rpt/connected' (language 'en') >> >> --<Zap/pseudo-694573800> Playing 'digits/2' (language 'en') >> >> --<Zap/pseudo-694573800> Playing 'rpt/node' (language 'en') >> >> --<Zap/pseudo-694573800> Playing 'digits/2' (language 'en') >> >> --<Zap/pseudo-694573800> Playing 'digits/7' (language 'en') >> >> --<Zap/pseudo-694573800> Playing 'digits/8' (language 'en') >> >> --<Zap/pseudo-694573800> Playing 'digits/6' (language 'en') >> >> --<Zap/pseudo-694573800> Playing 'digits/9' (language 'en') >> >> -- Hungup 'Zap/pseudo-694573800' >> >> -- Hungup 'Zap/pseudo-57557424' >> >> chan_usbradio ACRUK dev=usb27875 TX OFF>> >> >> Node Variable dump for node 27875: >> >> RPT_TXKEYED=0 >> >> RPT_NUMLINKS=1 >> >> RPT_LINKS=1,T27869 >> >> RPT_NUMALINKS=1 >> >> RPT_ALINKS=1,27869TU >> >> RPT_ETXKEYED=1 >> >> RPT_RXKEYED=1 >> >> RPT_AUTOPATCHUP=0 >> >> -- 8 variables >> >> [Sep 5 04:37:09] NOTICE[8978]: chan_usbradio.c:2696 usbradio_read: >> txPttIn = 0, chan Radio/usb27875 >> >> Node Variable dump for node 27875: >> >> RPT_NUMLINKS=1 >> >> RPT_LINKS=1,T27869 >> >> RPT_NUMALINKS=1 >> >> RPT_ALINKS=1,27869TK >> >> RPT_TXKEYED=0 >> >> RPT_ETXKEYED=1 >> >> RPT_RXKEYED=1 >> >> RPT_AUTOPATCHUP=0 >> >> -- 8 variables >> >> [Sep 5 04:37:10] NOTICE[8978]: chan_usbradio.c:2707 usbradio_read: >> txPttOut = 0, chan Radio/usb27875 >> >> [Sep 5 04:37:10] NOTICE[8978]: chan_usbradio.c:3013 usbradio_read: >> dev=usb27875 got b.txCtcssReady >> >> Node Variable dump for node 27875: >> >> RPT_NUMLINKS=1 >> >> RPT_LINKS=1,T27869 >> >> RPT_NUMALINKS=1 >> >> RPT_ALINKS=1,27869TU >> >> RPT_TXKEYED=0 >> >> RPT_ETXKEYED=1 >> >> RPT_RXKEYED=1 >> >> RPT_AUTOPATCHUP=0 >> >> -- 8 variables >> >> Node Variable dump for node 27875: >> >> RPT_TXKEYED=1 >> >> RPT_NUMLINKS=1 >> >> RPT_LINKS=1,T27869 >> >> RPT_NUMALINKS=1 >> >> RPT_ALINKS=1,27869TU >> >> RPT_ETXKEYED=1 >> >> RPT_RXKEYED=1 >> >> RPT_AUTOPATCHUP=0 >> >> -- 8 variables >> >> chan_usbradio ACRK dev=usb27875 code=(null) TX ON >> >> [Sep 5 04:37:12] NOTICE[8978]: chan_usbradio.c:2690 usbradio_read: >> txPttIn = 1, chan Radio/usb27875 >> >> [Sep 5 04:37:12] NOTICE[8978]: chan_usbradio.c:2707 usbradio_read: >> txPttOut = 1, chan Radio/usb27875 >> >> [Sep 5 04:37:12] NOTICE[8978]: chan_usbradio.c:3013 usbradio_read: >> dev=usb27875 got b.txCtcssReady 103.5 >> >> -- Hungup 'Zap/pseudo-1653099707' >> >> chan_usbradio ACRUK dev=usb27875 TX OFF>> >> >> Node Variable dump for node 27875: >> >> RPT_TXKEYED=0 >> >> RPT_NUMLINKS=1 >> >> RPT_LINKS=1,T27869 >> >> RPT_NUMALINKS=1 >> >> RPT_ALINKS=1,27869TU >> >> RPT_ETXKEYED=1 >> >> RPT_RXKEYED=1 >> >> RPT_AUTOPATCHUP=0 >> >> -- 8 variables >> >> [Sep 5 04:37:13] NOTICE[8978]: chan_usbradio.c:2696 usbradio_read: >> txPttIn = 0, chan Radio/usb27875 >> >> [Sep 5 04:37:14] NOTICE[8978]: chan_usbradio.c:2707 usbradio_read: >> txPttOut = 0, chan Radio/usb27875 >> >> [Sep 5 04:37:14] NOTICE[8978]: chan_usbradio.c:3013 usbradio_read: >> dev=usb27875 got b.txCtcssReady >> >> Node Variable dump for node 27875: >> >> RPT_NUMLINKS=1 >> >> RPT_LINKS=1,T27869 >> >> RPT_NUMALINKS=1 >> >> RPT_ALINKS=1,27869TK >> >> RPT_TXKEYED=0 >> >> RPT_ETXKEYED=1 >> >> RPT_RXKEYED=1 >> >> RPT_AUTOPATCHUP=0 >> >> -- 8 variables >> >> Node Variable dump for node 27875: >> >> RPT_NUMLINKS=1 >> >> RPT_LINKS=1,T27869 >> >> RPT_NUMALINKS=1 >> >> RPT_ALINKS=1,27869TU >> >> RPT_TXKEYED=0 >> >> RPT_ETXKEYED=1 >> >> RPT_RXKEYED=1 >> >> RPT_AUTOPATCHUP=0 >> >> -- 8 variables >> >> Node Variable dump for node 27875: >> >> RPT_TXKEYED=1 >> >> RPT_NUMLINKS=1 >> >> RPT_LINKS=1,T27869 >> >> RPT_NUMALINKS=1 >> >> RPT_ALINKS=1,27869TU >> >> RPT_ETXKEYED=1 >> >> RPT_RXKEYED=1 >> >> RPT_AUTOPATCHUP=0 >> >> -- 8 variables >> >> chan_usbradio ACRK dev=usb27875 code=(null) TX ON >> >> [Sep 5 04:37:18] NOTICE[8978]: chan_usbradio.c:2690 usbradio_read: >> txPttIn = 1, chan Radio/usb27875 >> >> [Sep 5 04:37:18] NOTICE[8978]: chan_usbradio.c:2707 usbradio_read: >> txPttOut = 1, chan Radio/usb27875 >> >> [Sep 5 04:37:18] NOTICE[8978]: chan_usbradio.c:3013 usbradio_read: >> dev=usb27875 got b.txCtcssReady 103.5 >> >> -- Hungup 'Zap/pseudo-1462152646' >> >> chan_usbradio ACRUK dev=usb27875 TX OFF>> >> >> Node Variable dump for node 27875: >> >> RPT_TXKEYED=0 >> >> RPT_NUMLINKS=1 >> >> RPT_LINKS=1,T27869 >> >> RPT_NUMALINKS=1 >> >> RPT_ALINKS=1,27869TU >> >> RPT_ETXKEYED=1 >> >> RPT_RXKEYED=1 >> >> RPT_AUTOPATCHUP=0 >> >> -- 8 variables >> >> [Sep 5 04:37:19] NOTICE[8978]: chan_usbradio.c:2696 usbradio_read: >> txPttIn = 0, chan Radio/usb27875 >> >> [Sep 5 04:37:20] NOTICE[8978]: chan_usbradio.c:2707 usbradio_read: >> txPttOut = 0, chan Radio/usb27875 >> >> [Sep 5 04:37:20] NOTICE[8978]: chan_usbradio.c:3013 usbradio_read: >> dev=usb27875 got b.txCtcssReady >> >> Node Variable dump for node 27875: >> >> RPT_NUMLINKS=1 >> >> RPT_LINKS=1,T27869 >> >> RPT_NUMALINKS=1 >> >> RPT_ALINKS=1,27869TK >> >> RPT_TXKEYED=0 >> >> RPT_ETXKEYED=1 >> >> RPT_RXKEYED=1 >> >> RPT_AUTOPATCHUP=0 >> >> -- 8 variables >> >> Node Variable dump for node 27875: >> >> RPT_NUMLINKS=1 >> >> RPT_LINKS=1,T27869 >> >> RPT_NUMALINKS=1 >> >> RPT_ALINKS=1,27869TU >> >> RPT_TXKEYED=0 >> >> RPT_ETXKEYED=1 >> >> RPT_RXKEYED=1 >> >> RPT_AUTOPATCHUP=0 >> >> -- 8 variables >> >> Node Variable dump for node 27875: >> >> RPT_TXKEYED=1 >> >> RPT_NUMLINKS=1 >> >> RPT_LINKS=1,T27869 >> >> RPT_NUMALINKS=1 >> >> RPT_ALINKS=1,27869TU >> >> RPT_ETXKEYED=1 >> >> RPT_RXKEYED=1 >> >> RPT_AUTOPATCHUP=0 >> >> -- 8 variables >> >> chan_usbradio ACRK dev=usb27875 code=(null) TX ON >> >> [Sep 5 04:37:28] NOTICE[8978]: chan_usbradio.c:2690 usbradio_read: >> txPttIn = 1, chan Radio/usb27875 >> >> [Sep 5 04:37:28] NOTICE[8978]: chan_usbradio.c:2707 usbradio_read: >> txPttOut = 1, chan Radio/usb27875 >> >> [Sep 5 04:37:28] NOTICE[8978]: chan_usbradio.c:3013 usbradio_read: >> dev=usb27875 got b.txCtcssReady 103.5 >> >> -- Hungup 'Zap/pseudo-588981205' >> >> chan_usbradio ACRUK dev=usb27875 TX OFF>> >> >> Node Variable dump for node 27875: >> >> RPT_TXKEYED=0 >> >> RPT_NUMLINKS=1 >> >> RPT_LINKS=1,T27869 >> >> RPT_NUMALINKS=1 >> >> RPT_ALINKS=1,27869TU >> >> RPT_ETXKEYED=1 >> >> RPT_RXKEYED=1 >> >> RPT_AUTOPATCHUP=0 >> >> -- 8 variables >> >> [Sep 5 04:37:29] NOTICE[8978]: chan_usbradio.c:2696 usbradio_read: >> txPttIn = 0, chan Radio/usb27875 >> >> [Sep 5 04:37:30] NOTICE[8978]: chan_usbradio.c:2707 usbradio_read: >> txPttOut = 0, chan Radio/usb27875 >> >> [Sep 5 04:37:30] NOTICE[8978]: chan_usbradio.c:3013 usbradio_read: >> dev=usb27875 got b.txCtcssReady >> >> [Sep 5 04:37:31] WARNING[8963]: chan_iax2.c:10127 iax2_do_register: >> REGISTER-LOG: Sending registration request for '27875' >> >> [Sep 5 04:37:31] WARNING[8964]: chan_iax2.c:7690 registry_rerequest: >> REGISTER-LOG: registry rereqquest >> >> [Sep 5 04:37:37] NOTICE[8978]: chan_usbradio.c:2817 usbradio_read: >> rxcarrierdetect = 1, chan Radio/usb27875 >> >> [Sep 5 04:38:21] WARNING[8971]: chan_iax2.c:10127 iax2_do_register: >> REGISTER-LOG: Sending registration request for '27875' >> >> [Sep 5 04:38:21] WARNING[8967]: chan_iax2.c:7690 registry_rerequest: >> REGISTER-LOG: registry rereqquest >> >> KA4EPS-R-LAKEWORTH*CLI> >> >> >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users(a)ohnosec.org >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users >

1 0

Echolink test commands
by Tony KT9AC 04 Sep '11

04 Sep '11

Is there some Echolink test commands? We've got a new node up and running but can't get Echolink to register. It's only seen as going out port 80 but nothing else. I've tried two different working config files and firewall settings are open from 5198 to 5200 TCP/UDP. Thanks, Tony

5 5