- App_rpt-users - lists.keekles.org

Happer system with APRS
by Jim Duuuude 26 Jan '11

26 Jan '11

I found and fixed the problem (well, it wasnt really a problem, more of an irritation) that some of you were having while running APRS (the 'interrupted system call' thing). Please re-download app_gps from the SVN and it will fix this. JIM WB6NIL

1 0

Rxnotch
by Monty Dana 25 Jan '11

25 Jan '11

I found an old config file for app_rpt at voip-info.org and the rxnotch= caught my eye. Are we still able to use that? Monty

2 1

Re: [App_rpt-users] manually issue cop command?
by K&R Yoksh 25 Jan '11

25 Jan '11

Hi Tim,Thanks for the reply.. I've been playing around at the CLI prompt, and can get functions such as this to work:rpt cmd 2211 cop 4 0However, I still can't seem to control my parallel port I/O pins. I've followed all of the advice onhttp://ohnosec.org/drupal/node/177Any suggestions?Thanks.. 73KyleK0KN --- Original Message ---You do not have to assign a dtmf. Example: CLI> rpt cmd 2535 cop 1 0 The above command is a warm boot. 2535 is my node number. Notice the trailing 0 is needed to satisfy the command interpreter but has no meaning. Asterisk has command line help. Type "rpt cmd" and press enter will show options. -- Tim :wq

2 1

manually issue COP command?
by K&R Yoksh 25 Jan '11

25 Jan '11

Hello, I'm wondering if there is a way to manually issue a COP command? I've tried to issue it from the CLI> prompt, but so far no luck.. I have been working on my DTMF commands, and after the below commands didn't work, I wanted to check the syntax.. Is it possible, or do I have to assign a DTMF in rpt.conf, restart Asterisk, and retry? 1234 = cop,61,PP4=1 ; Turn on pp4 Thanks. 73, Kyle K0KN

2 1

URI PTT Delay
by Steve Schulze 25 Jan '11

25 Jan '11

Anyone experiencing PTT delays with DMK's URI? I have seen many instances of where Asterisk is sending voice to the URI (announcements, etc...), but the PTT is not engaged, nor is the TX LED lit. Anyone have any insight? Thanks! -- Steve Schulze - Radio Amateur, General Class - N9UDO Administrator, Baraboo, Wisconsin D-Star System - WB9FDZ Treasurer, Badgerland Amateur Television Society - KB9SFS http://yellowthunder.org/dstar.html

1 0

Fan Script
by K&R Yoksh 25 Jan '11

25 Jan '11

Hello, I have another question for the group... I'm curious if it will be possible for me to write a script to control a fan for my transmitter to operate under app_rpt? I'm using my homebrew IRLP-compatible board for PTT and COS, and have managed to configure usbradio.conf to key the AUX1 port (pp3) along with the PTT using: pp3 = ptt I was considering building a hardware control circuit using a 555 timer, but thought I'd look into a software approach if possible. I used a similar script under IRLP/EchoIRLP by Robert Pectol, and it worked very well. Thanks. 73 Kyle K0KN

1 0

aprs password for app_gps
by Chuck Henderson 24 Jan '11

24 Jan '11

I would like to set up my allstarlink system to report position information to the aprs system. Can someone tell me how to set up this password? Also, are the default server and port listed in the example below what should be used? I have searched the aprs site and couldn't find who to request this information from. Chuck Henderson, WB9UUS > > ; Configuration for app_gps > ; > [general] > > call = wb9uus-2 ; callsign (including SSID) for APRS purposes*password = 12345 ; Password for APRS-IS server for above callsign* > comment = AllStar Node 27468 ; Text to be displayed associated with this station*server = second.aprs.net ; APRS-IS server to report information to**port = 10151 ; port on server to send data* > icon = r ; A CAR (default) Icon do be displayed for station on APRS display (see below) > comport = /dev/ttyS0 ; Serial port for GPS receiver (specify this only if using GPS receiver) > baudrate = 4800 ; Baud rate for GPS receiver (specify this only if using GPS receiver) > ;debug = y ; set this for debug output > freq=442.700 ; Display Frequency of station > tone=107.2 ; CTCSS tone of station (0.0 for none) > lat=40.508 ; Fixed (default) latitude in decimal degrees > lon=-88.988 ; Fixed (default) longitude in decimal degrees > elev=123.4 ; Elevation of Antenna in Meters (*NOT* HAAT) > power=9 ; Power level (see below) > height=5 ; Antenna Height in HAAT (see below) > gain=8 ; Antenna Gain (see below) > dir=0 ; Antenna Direction (see below) > > On Sat, Jan 22, 2011 at 10:30 PM, Jim Duuuude <telesistant(a)hotmail.com>wrote: > >> There have (obviously) been some changes/improvements made to the >> Echolink and APRS/GPS subsystems within app_rpt. >> >> Included in these is the ability for a node to report its "fixed" GPS >> coordinates >> to the APRS network, even if it does not have a GPS receiver connected. >> >> Please see the following: >> >> Setting up Echolink Connectivity >> http://209.159.155.200/drupal/node/56 >> >> Setting Up APRS and GPS Configuration >> http://209.159.155.200/drupal/node/179 >> >> Of course, the latest copies of app_gps and chan_echolink need to be >> downloaded from the SVN. >> >> JIM WB6NIL >> >> >> >

7 12

DTMF passthru
by VE3GIH Gordon Hewit 24 Jan '11

24 Jan '11

KE2N Ken suggested using the propagate_dtmf command in the rpt.conf file, as a way to propagate DTMF signals to other nodes. I need this capacity to allow our members access to the local phone patch. However with all nodes set to duplex=2 (full duplex) and propagate_dtmf=yes, I'm still not getting DTMF on the other local repeaters. The asterisk console sees the DTMF, but Asterisk isn't passing the digits onwards. Does anyone have a suggestion about what else I can try? VE3GIH Gord ______________________________________________ Date: Sat, 22 Jan 2011 09:42:49 -0500 (EST) From: Ken <ke2n(a)cs.com> To: n3fe(a)repeater.net, telesistant(a)hotmail.com, app_rpt-users(a)ohnosec.org Subject: Re: [App_rpt-users] DTMF Allow Cory I think there is a setting for this propagate_dtmf= see http://209.159.155.200/drupal/node/134 <snipped> GL Ken KE2N Gordon Hewit 289-800-1473 (home)

3 3

One Way local connect
by KI6PSP (Ed) 24 Jan '11

24 Jan '11

Internal Allstar Connect works only one way. Run Macro for connect from 27178 to 27179 [Jan 24 07:10:19] NOTICE[3020]: chan_usbradio.c:2985 usbradio_read: Got DTMF char * duration 255 ms [Jan 24 07:10:19] NOTICE[3020]: chan_usbradio.c:2985 usbradio_read: Got DTMF char 5 duration 192 ms [Jan 24 07:10:20] NOTICE[3020]: chan_usbradio.c:2985 usbradio_read: Got DTMF char 5 duration 234 ms [Jan 24 07:10:20] NOTICE[3020]: chan_usbradio.c:2985 usbradio_read: Got DTMF char 2 duration 256 ms [Jan 24 07:10:21] NOTICE[2699]: chan_iax2.c:9043 socket_process: Rejected connect attempt from 127.0.0.1, request '27179@radio-secure' does not exist [Jan 24 07:10:21] WARNING[2700]: chan_iax2.c:9221 socket_process: Call rejected by 127.0.0.1: No such context/extension -- Hungup 'IAX2/127.0.0.1:4569-1476' -- Hungup 'Zap/pseudo-1926956532' -- Hungup 'Zap/pseudo-1808547294' -- Hungup 'Zap/pseudo-1160049049' -- <Zap/pseudo-1659184301> Playing 'rpt/nodenames/27179' (language 'en') -- <Zap/pseudo-1659184301> Playing 'rpt/connection_failed' (language 'en') -- Hungup 'Zap/pseudo-1659184301' Run Macro for connect from 27179 to 27178 [Jan 24 07:11:37] NOTICE[3021]: chan_usbradio.c:2985 usbradio_read: Got DTMF char * duration 277 ms [Jan 24 07:11:38] NOTICE[3021]: chan_usbradio.c:2985 usbradio_read: Got DTMF char 5 duration 170 ms [Jan 24 07:11:38] NOTICE[3021]: chan_usbradio.c:2985 usbradio_read: Got DTMF char 5 duration 216 ms [Jan 24 07:11:39] NOTICE[3021]: chan_usbradio.c:2985 usbradio_read: Got DTMF char 2 duration 256 ms -- Accepting UNAUTHENTICATED call from 127.0.0.1: > requested format = gsm, > requested prefs = (gsm|g726aal2|ulaw), > actual format = g726aal2, > host prefs = (g726aal2|gsm), > priority = mine -- Call accepted by 127.0.0.1 (format g726aal2) -- Format for call is g726aal2 -- Executing [27178@radio-secure:1] Rpt("IAX2/127.0.0.1:4569-2496", "27178") in new stack == Spawn extension (radio-secure, 27178, 1) exited KEEPALIVE on 'IAX2/127.0.0.1:4569-2496' -- <Zap/pseudo-360302433> Playing 'rpt/nodenames/27178' (language 'en') -- Hungup 'Zap/pseudo-1169767949' -- Hungup 'Zap/pseudo-1558440647' -- <Zap/pseudo-360302433> Playing 'rpt/connected' (language 'en') -- Hungup 'Zap/pseudo-1043702359' -- <Zap/pseudo-360302433> Playing 'digits/2' (language 'en') -- <Zap/pseudo-360302433> Playing 'rpt/nodenames/27179' (language 'en') -- <Zap/pseudo-128502133> Playing 'rpt/nodenames/27178' (language 'en') -- Hungup 'Zap/pseudo-360302433' -- <Zap/pseudo-128502133> Playing 'rpt/connected' (language 'en') -- <Zap/pseudo-128502133> Playing 'digits/2' (language 'en') -- <Zap/pseudo-128502133> Playing 'rpt/nodenames/27179' (language 'en') -- Hungup 'Zap/pseudo-128502133' -- Hungup 'Zap/pseudo-1357185046' -- Hungup 'Zap/pseudo-1756365411' I thought it had something to do with the "Node=" line in extensions.conf, so I commented it out, but it still does this. I already found the register lines in the IAX.conf and uncommented it. Both nodes in the rpt.conf file have the same context and account names. -- KI6PSP (Ed)

1 0

Suggested mod to default extensions.conf
by KI6PSP (Ed) 24 Jan '11

24 Jan '11

I am by no means an expert, but I have a suggestion. I nuked my extensions.conf file and rebuilt it from the web confuguration and I found a glitch in the default config. If the internet connection is down, and a call is made, the fast busy tone will sound, but it will not stop. If this is a simplex node, that is a problem. Here is my suggested default config: ; Un-comment out the following clause if you want Allstar Autopatch service [pstn-out] exten=_NXXNXXXXXX,1,Dial(IAX2/allstar-autopatch/\${EXTEN}) exten=_NXXNXXXXXX,2,Wait,3 exten=_NXXNXXXXXX,3,Hangup Thanks Ed KI6PSP

1 0