- App_rpt-users - lists.keekles.org

Scheduling audio messages
by KC2WDZ 30 Jan '11

30 Jan '11

How would you schedule an audio message file to play every hour or so? As it seems, tailmessage wont work for me because I'm running a simplex node with no tones or hangtimes (duplex=0 in rpt.conf).

1 0

Messages log file question
by Matt Beasant 29 Jan '11

29 Jan '11

Hi, Is there any way that I can stop the Indian hackers who are constantly trying to find a valid extension / password combination on my SIP gateway into the repeaters? They're using up a bunch of my capped internet bandiwdth and making 10 days worth of messages log over 24Mb! If not, is there a way to stop such attempts filing the messages log with megs and megs of this stuff? Thanks Matt G4RKY

2 1

CTCSS Problem
by Kris Kirkland 28 Jan '11

28 Jan '11

Howdy First I'd like to start off by saying thanks for such a great piece of software for asterisk, I've been using Asterisk for 6 years now. I'm a network engineer so I'm not a repeater guru by any means, but I'm having a problem with my setup using the URI Model: DMK URI My first problem is; if ctcssfrom is set to anything but dsp, the repeater keys up as soon as asterisk is started. I can even disconnect everything but PTT and Ground and it still keys up as soon as its started. I did this to eliminate the possibility of the device sensing CTCSS via the mic_in_ac. So my understanding was that if I set ctcssfrom=no then it would ignore ctcss, but it still keys up. Is this a bug in the software being that it happens even with everything but ptt/gnd is disconnected? -- ______________________ Kris Kirkland ~ K5KRK ______________________

3 6

Re: [App_rpt-users] CTCSS Problem
by Tony KT9AC 27 Jan '11

27 Jan '11

I believe that's what the documentation or even within the usbradio.conf file says. Ctcssfrom=no; system will be carrier access ----- Reply message ----- From: "Kris Kirkland" <kris(a)kriskirkland.com> Date: Thu, Jan 27, 2011 2:37 pm Subject: [App_rpt-users] CTCSS Problem To: <app_rpt-users(a)ohnosec.org> So if I set ctcssfrom=no will it disable ctcss checking all together and repeat based on COR? If I can disable CTCSS then I can narrow my problem down a little further. -- ______________________ Kris Kirkland ~ K5KRK ______________________ _______________________________________________ App_rpt-users mailing list App_rpt-users(a)ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

1 0

Wx Script
by k8khw＠att.net 27 Jan '11

27 Jan '11

I have found using the WOANM wx Script plays on Asterisk Node using Playback just fine. His script now uses wavplay which wont key the Radio ect to play the files. Anyone know what I could to to get playback to be called to play the wx files instead of wavplay Randy

3 2

DTMF Passthru
by VE3GIH Gordon Hewit 27 Jan '11

27 Jan '11

Thanks to those that responded to my previous request for help passing DTMF between nodes. Apparently, we agree that DTMF tones are not being passed thru Asterisk nodes on the same PC, regardless of the setting of rpt.conf parameter 'propagate_dtmf'. If someone has actually done passed DTMF via Asterisk, I'd appreciate hearing from them VE3GIH Gord Hewit Durham ARES 416-779-3740 mobile 289-800-1473 VoIP www.durhamares.ca website 4167793740(a)txt.bell.ca SMS email VE3GIH(a)winlink.org Emerg. email

2 1

WxScript
by k8khw＠att.net 27 Jan '11

27 Jan '11

<snip> ?Mark, Finally after a fresh install of all the files I have the get scripts running. When I try to play the scripts it acts like its running and goes back to the root prompt and nothing come out the speakers or transmitted over the air. Is there something I need to change in the play script to get it to play. I am using the W0ANM scripts. Brian KB3ORS 27321 Brain I ask the same question a while back and never did get the issue resolved. Actually here everything is working as it should which I bet is the case in your end as well. Here When we call for the script to play the Wx file it plays it fine but is only heard if someone else is talking on the system and has the Node keyed up. When they unkey or stop talking so does the Wx script. I bet if you havn,t fixed it ready try calling the Script and have a on going qso on your system and see if you hear the Wx report ect. if you have it working we would like to know what you did. Randy Node 27372

2 1

manually issue COP command?
by K&R Yoksh 26 Jan '11

26 Jan '11

Thanks to Jim, my aux ports are working now! The PP must be uppercase, as in the examples below: rpt cmd 2211 cop 61,PP4=1 0 ; Parallel Port 4 high rpt cmd 2211 cop 61,PP4=0 0 ; Parallel Port 4 low rpt cmd 2211 cop 61,PP5=1 0 ; Parallel Port 5 high rpt cmd 2211 cop 61,PP5=0 0 ; Parallel Port 5 low 73, Kyle K0KN --- Original Message --- Ok, I have the answer: rpt cmd 2211 cop 61,pp4=1 0 JIM

1 0

Re: [App_rpt-users] manually issue COP command?
by Jim Duuuude 26 Jan '11

26 Jan '11

Ok, I have the answer: rpt cmd 2211 cop 61,pp4=1 0 JIM From: yokshs(a)sbcglobal.net To: telesistant(a)hotmail.com Subject: Re: [App_rpt-users] manually issue COP command? Date: Wed, 26 Jan 2011 00:40:15 -0600 No problem.. Any idea why I can't get the parallel port outputs to work with a COP? Thanks. 73. Kyle K0KN ----- Original Message ----- From: Jim Duuuude To: yokshs(a)sbcglobal.net ; app_rpt mailing list Sent: Tuesday, January 25, 2011 10:54 PM Subject: RE: [App_rpt-users] manually issue COP command? never mind... that was just a dumb suggestion. I wasnt paying attention fully. sorry From: telesistant(a)hotmail.com To: yokshs(a)sbcglobal.net; app_rpt-users(a)ohnosec.org Subject: RE: [App_rpt-users] manually issue COP command? Date: Tue, 25 Jan 2011 20:12:31 -0800 How about rpt cmd 2211 cop 61 GPIO4=1 (since that's what would go in the line for a DTMF function) JIM From: yokshs(a)sbcglobal.net To: app_rpt-users(a)ohnosec.org Date: Tue, 25 Jan 2011 13:57:28 -0600 Subject: [App_rpt-users] manually issue COP command? Hi Tim (and the list), Thanks for the reply.. I have these entries in usbradio.conf: pp3 = ptt pp11 = cor ; pp10 = in ; in, cor or ctcss ; pp12 = in ; pins 10,12,13,15 are for DTMF ; pp13 = in ; pp15 = in pp4=out0 ; pins 4,5,6 are AUX 1,2,3, default off pp5=out0 pp6=out0 My PTT and COS via the parallel port work perfectly, but so far, the only success I've had controlling other pins has been by assigning them to PTT. For example, as a test I set: pp3 = ptt pp4 = ptt pp5 = ptt pp6 = ptt This keys all 4 outputs any time PTT is called for. I just wanted to make sure that app_rpt could control those pins.. Besides that, I've had no success trying to use COP 61 or 62 to control my pp4,5,6 I've tried the syntax you suggested: rpt cmd 2211 cop 61 pp4=1 I've also tried every other thing I could think of, including: rpt cmd 2211 cop 61 pp4=1,0 rpt cmd 2211 cop 61 pp4=1.0,0 rpt cmd 2211 cop 62 pp4=32767 73. Kyle K0KN --- Original Message ---I've not played with this but my guess is... You in usbradio.conf you should put this in the [usb] stanza: pp2=out0 ; set parallel port pin 2 to low output. Then this should change it to high: CLI>rpt cmd 2211 cop 61 pp2=1 Jim or others please jump in here if I have it wrong. -- Tim :wq _______________________________________________ App_rpt-users mailing list App_rpt-users(a)ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

1 0

manually issue COP command?
by K&R Yoksh 26 Jan '11

26 Jan '11

Hi Tim (and the list),Thanks for the reply.. I have these entries in usbradio.conf: pp3 = ptt pp11 = cor ; pp10 = in ; in, cor or ctcss ; pp12 = in ; pins 10,12,13,15 are for DTMF ; pp13 = in ; pp15 = in pp4=out0 ; pins 4,5,6 are AUX 1,2,3, default off pp5=out0 pp6=out0 My PTT and COS via the parallel port work perfectly, but so far, the only success I've had controlling other pins has been by assigning them to PTT. For example, as a test I set: pp3 = ptt pp4 = ptt pp5 = ptt pp6 = ptt This keys all 4 outputs any time PTT is called for. I just wanted to make sure that app_rpt could control those pins.. Besides that, I've had no success trying to use COP 61 or 62 to control my pp4,5,6 I've tried the syntax you suggested: rpt cmd 2211 cop 61 pp4=1 I've also tried every other thing I could think of, including: rpt cmd 2211 cop 61 pp4=1,0 rpt cmd 2211 cop 61 pp4=1.0,0 rpt cmd 2211 cop 62 pp4=32767 73. Kyle K0KN --- Original Message ---I've not played with this but my guess is... You in usbradio.conf you should put this in the [usb] stanza: pp2=out0 ; set parallel port pin 2 to low output. Then this should change it to high: CLI>rpt cmd 2211 cop 61 pp2=1 Jim or others please jump in here if I have it wrong. -- Tim :wq

2 2