- App_rpt-users - lists.keekles.org

Registration Refused
by Tim Sawyer 25 Aug '09

25 Aug '09

I'm setting up a second node for the first time and it won't register. /etc/asterisk/iax.conf: [general] register=A2528:0xxxxx@register.allstarlink.org register=A2529:0xxxxx@register.allstarlink.org /var/log/astersik/messages: [Aug 25 05:41:57] NOTICE[16131] chan_iax2.c: Registration of 'A2529' rejected: 'Registration Refused' from: 'xxx.xxx.xxx.xxx' [Aug 25 05:42:47] NOTICE[16129] chan_iax2.c: Registration of 'A2529' rejected: 'Registration Refused' from: 'xxx.xxx.xxx.xxx' [Aug 25 05:43:37] NOTICE[16128] chan_iax2.c: Registration of 'A2529' rejected: 'Registration Refused' from: 'xxx.xxx.xxx.xxx' I've confirmed the new password and tripple check my conf files. The new node is otherwise working. Any ideas? Thanks, -- Tim, WD6AWP :wq

3 7

Node Losing RX Audio
by Ramesh Dhami (VA3UV) 24 Aug '09

24 Aug '09

Hi All; I have noticed the following since adding a remote base (TM-271) to my system (so the system comprises of a main repeater node (operating half-duplex into an analog controller) and a second fob connected to the TM-271).... Randomly, the audio from my main node (connected to the analog controller) disappears... i.e., app_rpt does not 'hear' the audio from the repeater, it *does* see the COS signal, so the result is an unmodulated carrier out to the connected links. Interestingly, the audio from the remote base works fine - i.e., if I hop over to the RB, I can carry on the conversation with folks connected to the main repeater node. An rpt reload does not fix this. When I restart the Asterisk service, then things are fine and again will run for a random period of time (could be one day, or sometimes 3 or 4 days) until the next hit. I've tried disconnecting the RB node, so that it is not connected to the main node at all, and this does not seem to make a difference. This morning, I have commented out the RB stanza in rpt.conf and its associated stanza in usbradio.conf - will be interesting to see if this re-occurs with just the one node connected. ... wonder if anyone else has seen this, and if so, what the fix was / is? Thanks, Ramesh.

1 0

Scheduler
by Tim Sawyer 23 Aug '09

23 Aug '09

Hi again :-) Where is the scheduler documentation? Also is all scheduling done with the scheduler or can cron also used? -- Tim :wq

2 1

nodes1 server back up to its original glory (or whatever at least)
by Jim Duuuude 23 Aug '09

23 Aug '09

Thanks to Jim K6JWN we now have a new and happy stable, and most importanty Cpanel-less place for our nodes distribution server. Its up and running like it should be. Jim WB6NIL

1 0

Re: [App_rpt-users] echolink config help
by Todd Birkenholtz 22 Aug '09

22 Aug '09

Mars and Steve, Thanks for the response It wasn't what I wanted to hear but it did explain why I couldn't get two-way audio to work correctly through Echolink. I assumed the the Echolink driver used some type of vox to convert it to a by-directional circuit using the magic inside app_rpt. N0PCO, you gave me a couple of options to think over and in typical HAM fashion it looks like I am going to need some duct tape and baling twine... I like it !! ;-) Do either of you know if the dtpDir soluton will work in the same manner? Thanks again for your detailed response to my issue. 73 W0IOU Todd Birkenholtz On Sat, Aug 22, 2009 at 3:36 PM, app_rpt(a)alertradio.net < app_rpt(a)alertradio.net> wrote: > Todd, are you using one computer for both Asterisk and EchoLink? > > If you are using two computers, I have a easy way to make things work (or > at least some what easy). > > The key you will need to have a USB Audio Adapter on the Asterisk server. > The USB Audio Adapter doesn't need to be modified to do what you are > wanting, it just needs to be present for the audio from the Asterisk server > in such a way that the ACID installations nows that there's an actual audio > source available. Depending on how you have EchoLink attached to the > repeater, you will need to build a lashup circuit that will bring the audio > from the Asterisk server to the EchoLink host. > > > ========================== > > So your primary objective is to use Asterisk PBX without the RF Gateway, a > better solution to the Asterisk ACID package would be to get one of the PBX > software packages such as Elastix or PBX in a Flash. Then on the EchoLink > host, add a second sound card or a USB Audio Adapter; this second sound card > will be used with a program called X-Lite. X-Lite is a softphone that can > be controlled by scripts and easily managed via the EchoLink API./Script > (assuming that EchoLink is running on a Windows box). Once again you will > need the lashup circuit to bring the audio to/from EchoLink to the softphone > > =========================== > > It really all comes down to how you presently have EchoLink setup. If you > are using VOX control, the task will be easy in regards to pushing audio via > X-Lite. Otherwise you will need a circuit for the COS detection. If > that's the case might as well just go for the full Asterisk PBX / RF Gateway > configuration and modify a USB Audio Adapter (with the CM108 chip in it) or > get one of the USB Radio Interfaces. You don't have to have the Asterisk > Allstar Link Node to make it work, but you will need a private node number > on the Asterisk side primarily for routing purposes. Plug in your EchoLink > information and create some routing information for telephone calls and > things will operate quite nicely. > > For security purposes having the RF Gateway and PBX in separate computers > can be beneficial. And as Steve has mentioned the pre-announcement before > making a call can be a bit tricky to accomplish. The way things are set up > here, for PSTN calls one has to enter the Patch Code-Telephone Number and > then the server asks for a PIN number. Calls that are routed internally do > not need a PIN number to complete the call. On Elastix you can set it up > where each person has their own PIN number as well a voice-mailbox. > > > The way things are set up here presently, I have three different computers > managing the PBX and RF Gateways. Usually they are all stand-alone but can > quickly be brought together when needed. There's some advantages to this > especially in regards to redundancy. I'll always have at least one way to > connect without total reliance on a single box. (If one has a backup > machine pre-configured this wouldn't be a problem at all) > > > Mars, N0PCO > http://asteriskradio.net > http://alertradio.net > > > > > > > > > > > > > ======================================================================= > > > Stephen Rodgers wrote: > > Todd Birkenholtz wrote: > > > I have been working on this for weeks and am getting nowhere. > > This is what I would like to accomplish. > I have no need at this point to link two repeaters together via IRLP or via > an IAX Allstarlink my goal is to allow our club's repeater with an Echolink > node connect to Asterisk via Echolink. > Since I will be acting as a pure voip gateway I will not be using the usb > driver or connect directly to an radio. > > After our club repeater connects to my Echolink node I would like to greet > the station with a welcome message and request a DTMF password. After they > provide the password I would like to provide a dial tone to be used as a > autopatch. > On the flip side I would like to provide a dial-in phone number on my > Asterisk system that would connect my Echolink node with our clubs repeater > node after the dial-in user provides a password. > > I am quite conffient I can do the Asterisk dial-plans I just need some > assistance with the rpt integration. > > > I was wondering if someone would share their config files to help me get > started in the right direction. > > Thanks and 73 > > Todd Birkenholtz W0IOU > > > > ------------------------------------------------------------------------ > > _______________________________________________ > App_rpt-users mailing listApp_rpt-users@qrvc.comhttp://qrvc.com/mailman/listinfo/app_rpt-users > > What you are asking for would require code changes to app_rpt > and use of an IAX/allstar and not an Echolink connection. > > VOIP connections are radio connections are treated differently in > app_rpt and echolink connections and they cannot be manipulated using > extension logic. All incoming echolink connections go directly to the > echolink channel driver. > > The app_rpt code does not support greeting incoming connections > (echolink, irlp, or allstar) with a password on standard nodes. > > Echolink connections are inherently half duplex, and useless for > carrying an autopatch call. The radio connection would have to be > IAX2/allstar to support a remote autopatch, and if this is the case, > then you'd have to have asterisk installed at the repeater and replace > the echolink software. (Probably what you are trying to avoid). > > > Steve > WA6ZFT > > > _______________________________________________ > App_rpt-users mailing listApp_rpt-users@qrvc.comhttp://qrvc.com/mailman/listinfo/app_rpt-users > > >

1 0

rpt_extnodes not updating...
by Ramesh Dhami (VA3UV) 22 Aug '09

22 Aug '09

Hi Steve / Jim; I've noticed that the rpt_extnodes file has not been updating recently... Here's the file info from #2200: -rwx------ 1 root root 14713 Aug 20 21:41 rpt_extnodes -rw-r--r-- 1 root root 0 Aug 22 08:41 rpt_extnodes-temp Here's the file info from #2461, which I have been soak testing here for the past week, and intend to send it back to its owner today: -rwx------ 1 root root 14717 Aug 18 00:15 rpt_extnodes -rw-r--r-- 1 root root 0 Aug 22 08:44 rpt_extnodes-temp Notice that the temp file is being created, so the script is running, but obviously failing (to connect to the server perhaps?) Hopefully an easy fix... Cheers, Ramesh.

6 9

Re: [App_rpt-users] Archivedir function - activity recording help
by Matt Beasant 22 Aug '09

22 Aug '09

OK here's what happens..... rpt.conf Duplex=1 Any signals going from App_rpt to the radio get recorded. A WAV file gets created in the archive directory and the outgoing audio is recorded. Any signals that come in on the radio, going towards App_rpt do not get recorded. A WAV file gets created but when played back there is no audio. rpt.conf Duplex=3 Is the same. I think the duplex setting in usbradio.conf will make the setup record audio in both directions if full duplex is set to 1 but I cant operate the system in full duplex here as previously described. Thanks for your help guys, Matt G4RKY 2009/8/22 Stephen Rodgers <sales(a)qrvc.com> > Matt Beasant wrote: > > Hi, > > I would like to monitor the activity on my link by using the function > > provided in app_rpt to record to the HDD. > > > > However, I am only able to record one half of the conversation. > > > > This node has a simplex radio connecting to a repeater via the repeater > > pair, so is not operating in full duplex mode. > > > > Is there anything I can do to be able to record both sides of the > > conversation? > > > > Many thanks, > > > > Matt > > G4RKY > > > > > > > > ------------------------------------------------------------------------ > > > > _______________________________________________ > > App_rpt-users mailing list > > App_rpt-users(a)qrvc.com > > http://qrvc.com/mailman/listinfo/app_rpt-users > > This may be broken on simplex nodes. Please reverify it still works in > duplex mode by setting duplex=2 and temporarily opening the PTT line to > the transmitter on your simplex radio. > > Steve > WA6ZFT > > >

2 3

P/L On/Off
by Tim Sawyer 22 Aug '09

22 Aug '09

Is there a cop (or other) command to turn P/L on and off, for both encode and decode? I looked through the source but don't see it. -- Tim :wq

2 1

echolink config help
by Todd Birkenholtz 22 Aug '09

22 Aug '09

I have been working on this for weeks and am getting nowhere. This is what I would like to accomplish. I have no need at this point to link two repeaters together via IRLP or via an IAX Allstarlink my goal is to allow our club's repeater with an Echolink node connect to Asterisk via Echolink. Since I will be acting as a pure voip gateway I will not be using the usb driver or connect directly to an radio. After our club repeater connects to my Echolink node I would like to greet the station with a welcome message and request a DTMF password. After they provide the password I would like to provide a dial tone to be used as a autopatch. On the flip side I would like to provide a dial-in phone number on my Asterisk system that would connect my Echolink node with our clubs repeater node after the dial-in user provides a password. I am quite conffient I can do the Asterisk dial-plans I just need some assistance with the rpt integration. I was wondering if someone would share their config files to help me get started in the right direction. Thanks and 73 Todd Birkenholtz W0IOU

2 1

Archivedir function - activity recording help
by Matt Beasant 22 Aug '09

22 Aug '09

Hi, I would like to monitor the activity on my link by using the function provided in app_rpt to record to the HDD. However, I am only able to record one half of the conversation. This node has a simplex radio connecting to a repeater via the repeater pair, so is not operating in full duplex mode. Is there anything I can do to be able to record both sides of the conversation? Many thanks, Matt G4RKY

1 0