For a simplex node you must tell the usb fob or URI that you are
connected to a simplex radio (not a full duplex radio like a repeater).
Otherwise the moment it receives a signal it will attempt to key the
same radio because it thinks it full duplex.
So in usbradio.conf set duplex=0 for simplex radios.
Also in rpt.conf you must tell App-rpt that you are running in half
duplex node so you must state in the node stanza duplex=0.
If you dont it will assume you are connected to a repeater.
So I dont think its a bug it just needs to be configured correctly.
Hope this helps.
Jon VA3RQ
> I don't understand something, and before I file this as a bug report
> on Mantis, I want to make sure that it is.
>
> My current setup consists of a DMK URI, and an Icom UHF commercial
> radio running simplex. I have this parameter set in usbradio.conf:
>
> duplex=0
>
> If I set duplex=1, it will continually kerchunk. If I set it back to
> duplex=0, when the radio receives a signal, it will transmit.
>
> Only by adding this to my node stanza in rpt.conf will it behave as expected:
>
> duplex=1
>
> Either I'm not understanding how this works, or I don't have something
> configured or implemented correctly, or it's a bug?
>
> tnx
> Stephen
> K1LNX
>
