- App_rpt-users - lists.keekles.org

Newbie mistake
by lengriff＠optimum.net 06 Apr '18

06 Apr '18

I have ASL 1.01 working fine. We no longer login as ' ROOT ', so commands must be preceeded with ' SUDO '. Learn somthin' new every day! Len WB2HKK

2 1

Stretch image install not working
by lengriff＠optimum.net 05 Apr '18

05 Apr '18

I downloaded the newest Pi Stretch img from the repository, and wrote it to a 4Gig micro-SD card. I logged in as repeater, and changed the password as directed. I followed directions in the readme file. It boots fine, but fails to get updates with apt_get. There are 3 errors: 1] chmod 0700 of directory /var/lib/apt/lists/partial failed - SetupAPTPartialDirectory ( 1: Operation not permitted ) 2] Could not open lock file /var/lib/apt/lists/lock - open (13: permission denied ) 3] Unable to lock directory /var/lib/apt/lists Also, after an " asterisk -r ", I get the version number, but asterisk does not start. The error is: Unable to connect to remote asterisk ( does /var/run/asterisk.ctl exist?) The file does exist, bit is 0 bytes. Len WB2HKK

3 4

Adding public node setup to private node
by Bryan Taylor 01 Apr '18

01 Apr '18

Hey all, Quick question hopefully. I have 15 private nodes connecting to a hub, on one of the private nodes i want to add public Allstar access using a public node I have setup on allstarlink.org. I have added a section to rpt.conf for the public node, added it’s ip address in the nodes section. The private node and public node will be on the same raspberry pi. Ports and all that stuff are setup, the simpleusb/rf side works perfectly. I did not edit anything in the extensions.conf as radio-secure is using variables instead of hardcoded node numbers. I also did not edit anything in simpleusb.conf as the public side is set to use dahdi/pseudo. I also added the registration line and also enabled status reporting. I have the private node using a simplex setup, with one radio and one uri and using simpleusb.conf. I have the public node setup using dahdi/pseudo, I connect the public node to the hub and all seems well, the node shows up on allstarlink and is green, I can connect to it using the web transceiver. However no audio ever gets passed through in or out. Seems it doesn’t receive anything and never sends anything. Did I miss something? Do I need to add more details? Thanks Bryan Vo1mxz Sent from my iPhone

2 3

download config from portal to dial
by Chris Curtis 31 Mar '18

31 Mar '18

I apologize for taking up bandwidth for something that has to be trivial. The acid box died some time ago and I finally installed 32bit dial on a new box. (ASL_1.01-20180228-amd64-i386-debian-stretch-netinst) I've made it through asl-menu initial step (repeater password, time zone, static ip etc) Now, I just want to download my node configuration from the portal. I've been unsuccessful in finding where that option/menu item is. I've found the backup/restore dialog but it has a node number of 1999 instead of asking for my allstarlink portal credentials. Is this 'function' still available or has it migrated to backup/restore function only? (you must setup your node, back it up to the allstarlink server, then you can restore it later) Thanks for your time list members and again, I apologize for the bandwidth. :) Chris KB0WLF

2 1

System-Wide nodes by country list
by Alberto Enrique Puig 31 Mar '18

31 Mar '18

Thanks very much Tim Sawyer. Thanks very much Tim Sawyer. I had no knowledge that we had that tool available. 73, Alberto KP4AP ________________________________ From: App_rpt-users <app_rpt-users-bounces(a)lists.allstarlink.org> on behalf of app_rpt-users-request(a)lists.allstarlink.org <app_rpt-users-request(a)lists.allstarlink.org> Sent: Thursday, March 29, 2018 12:00 PM To: app_rpt-users(a)lists.allstarlink.org Subject: App_rpt-users Digest, Vol 109, Issue 24 Send App_rpt-users mailing list submissions to app_rpt-users(a)lists.allstarlink.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users App_rpt-users Info Page - lists.allstarlink.org<http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users> lists.allstarlink.org Your email address: Your name (optional): You may enter a privacy password below. This provides only mild security, but should prevent others from messing with ... or, via email, send a message with subject or body 'help' to app_rpt-users-request(a)lists.allstarlink.org You can reach the person managing the list at app_rpt-users-owner(a)lists.allstarlink.org When replying, please edit your Subject line so it is more specific than "Re: Contents of App_rpt-users digest..." This site is dedicated to the memory of Jim Dixon WB6NIL Today's Topics: 1. Re: System-Wide nodes by country list (ARS W5OMR) 2. Ecgolibk timeout setting (ARS W5OMR) 3. Re: System-Wide nodes by country list (Tim Sawyer) 4. Connecting to other Nodes (kk4avi(a)yahoo.com) 5. Significant Problem with ASL (Michael Gurski) ---------------------------------------------------------------------- Message: 1 Date: Wed, 28 Mar 2018 16:00:34 +0000 From: ARS W5OMR <ars.w5omr(a)gmail.com> To: Users of Asterisk app_rpt <app_rpt-users(a)lists.allstarlink.org> Subject: Re: [App_rpt-users] System-Wide nodes by country list Message-ID: <CAOhDOk1gOe9-cN23XQv4hapj_aamNQMFuPxbg4bkxePE8jnRPg(a)mail.gmail.com> Content-Type: text/plain; charset="utf-8" Or... how about a list that is sortable by header info? Default is sort by node number, or click location to sort by there, or sort by frequency, as well, or callsign, even...

3 2

Looking for a Packaging Partner
by Steve Mahler 30 Mar '18

30 Mar '18

I have my AllStar based Add-on packages (AutoSkyWarn, AutoQuake and MID-JB-PRI) ready to move to the next step. I want to make them into a Debian Program / Application distribution for AllStarLink Asterisk (the great work by N4IRS). If you have experience in generating distributions using apt-get and have the time / interest in helping me ... I think it should be a matter of proof reading the documents and setting the default conditions in the config files. Please contact me if you have any interest in working with me on this project. You can email me at kizzy(a)lusfiber.net If you are interested in reading about the software: AutoSkyWarn Docs at http://KF5VH.com/auto-skywarn MID-JB-PRI Doc at http://KF5VH.com/mid-jb-pri Thanks! ...STeve - KF5VH --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus

3 2

Significant Problem with ASL
by Michael Gurski 29 Mar '18

29 Mar '18

Core 2 Duo 2.8GHz 6GB RAM 80GB HDD Previously ran with Centos 5 ACID. This box ran for 5 years, without issue. 1) MTR2000 UHF w/ URI 2) Remote Base CDM1250 VHF w/URI Upgraded to ASL from ACID ASL has been nothing but issues. First, what led me to the issues, COP,48 that we use for DTMF control, sounds "jittery" kind of like packet loss. But, it's local to a local transmitter. Second, linking two local nodes, on the same box, has significant "jittery symptoms", again, kind of like packet loss, on the same box. Third, linking to node 2560 Insomniac Net sounds like jittery mess. Jitter buffers are set exactly the same as they were on ACID. RPT.conf, same as ACID, extensions.conf same as ACID, usbradio.conf, same as ACID, you get the idea. Even to make sure, usb_tune file were still in check, I grabbed the service monitor and retuned usb_tune_XXX files. I am at a loss here. I have loaded 64 bit ASL first and then tried 32 bit ASL, no difference. Something is wrong. Anyone have the same symptoms? 73, Mike K0GUR

1 0

Connecting to other Nodes
by kk4avi＠yahoo.com 28 Mar '18

28 Mar '18

Hello All; I’m having an issue configuring my mode. I’m using a Motorola Maxtrac radio with an USB-RIM 16 pin adapter connected to a raspberry pi with the ASL_1.01-20180228-armhf-raspbian-stretch-image. I have configured my setting into the software. I have tried to connect to other nodes but I’m unable to connect. Other nodes are able to connect to my node. When I do *70 on my node…it says “Node 47667 REPEAT ONLY”. Is this normal? Do I need to change something in my setup? The 16 pin connector on the Maxtrac is configure with pin 8 and 12 to PL/DPL CSQ Low. Does this need to be changed? Any help to help me change the configuration where I can connect to another node would be appreciated. KK4AVI -----Original Message----- From: App_rpt-users [mailto:app_rpt-users-bounces@lists.allstarlink.org] On Behalf Of app_rpt-users-request(a)lists.allstarlink.org Sent: Friday, March 23, 2018 11:00 AM To: app_rpt-users(a)lists.allstarlink.org Subject: App_rpt-users Digest, Vol 109, Issue 18 Send App_rpt-users mailing list submissions to app_rpt-users(a)lists.allstarlink.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users or, via email, send a message with subject or body 'help' to app_rpt-users-request(a)lists.allstarlink.org You can reach the person managing the list at app_rpt-users-owner(a)lists.allstarlink.org When replying, please edit your Subject line so it is more specific than "Re: Contents of App_rpt-users digest..." This site is dedicated to the memory of Jim Dixon WB6NIL Today's Topics: 1. Connecting to other Nodes (kk4avi(a)yahoo.com) 2. Re: DIAL install on Virtual Box (Andy Madsen) 3. Re: DIAL install on Virtual Box (Jason Kendall) 4. Re: DIAL install on Virtual Box (Steve Zingman) 5. Re: DIAL install on Virtual Box (Jason Kendall) 6. Wireless issues on new install (KB7YS-Stacey) 7. Re: Wireless issues on new install (Steve Zingman) 8. Re: Connecting to other Nodes (Steve Zingman) 9. Re: Connecting to other Nodes (ARS W5OMR) 10. Re: Wireless issues on new install (Steve Zingman) 11. Re: Wireless issues on new install (Andy KB7B) ---------------------------------------------------------------------- Message: 1 Date: Thu, 22 Mar 2018 11:08:34 -0500 From: <kk4avi(a)yahoo.com> To: <app_rpt-users(a)lists.allstarlink.org> Subject: [App_rpt-users] Connecting to other Nodes Message-ID: <002801d3c1f8$08139e70$183adb50$(a)yahoo.com> Content-Type: text/plain; charset="utf-8" Hello, I'm trying to configure my node. It connect to AllStar and I can have other nodes connect to my node. I'm unable to connect to any nodes. When I do *70, it gives the node number and then says "REPEAT ONLY". I'm using a Motorola Maxtrac radio connected to a raspberry pi. Do I have something configured wrong? Robert KK4VI Alvaton, KY

1 0

System-Wide nodes by country list
by Alberto Enrique Puig 28 Mar '18

28 Mar '18

For allstar system administrators Is there a possibility that a list of nodes of the entire system per country can be added to the network server? Thanks! 73 Alberto KP4AP ________________________________ From: App_rpt-users <app_rpt-users-bounces(a)lists.allstarlink.org> on behalf of app_rpt-users-request(a)lists.allstarlink.org <app_rpt-users-request(a)lists.allstarlink.org> Sent: Saturday, March 24, 2018 12:00 PM To: app_rpt-users(a)lists.allstarlink.org Subject: App_rpt-users Digest, Vol 109, Issue 19 Send App_rpt-users mailing list submissions to app_rpt-users(a)lists.allstarlink.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users App_rpt-users Info Page - lists.allstarlink.org<http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users> lists.allstarlink.org Your email address: Your name (optional): You may enter a privacy password below. This provides only mild security, but should prevent others from messing with ... or, via email, send a message with subject or body 'help' to app_rpt-users-request(a)lists.allstarlink.org You can reach the person managing the list at app_rpt-users-owner(a)lists.allstarlink.org When replying, please edit your Subject line so it is more specific than "Re: Contents of App_rpt-users digest..." This site is dedicated to the memory of Jim Dixon WB6NIL Today's Topics: 1. Re: Wireless issues on new install (Pierre Martel) 2. Re: Announcing AllStarLink Asterisk version 1.01 (Greg Noneman) 3. Re: Announcing AllStarLink Asterisk version 1.01 (Steve Zingman) ---------------------------------------------------------------------- Message: 1 Date: Fri, 23 Mar 2018 13:11:02 -0400 From: Pierre Martel <petem001(a)gmail.com> To: Users of Asterisk app_rpt <app_rpt-users(a)lists.allstarlink.org> Subject: Re: [App_rpt-users] Wireless issues on new install Message-ID: <CAL8dJwrB_Zi9eF-+z7cu_xcBT8pjZMZvQzsAnYYDbGp8vqRZCA(a)mail.gmail.com> Content-Type: text/plain; charset="utf-8" maybe drop the output of iptable rules here, we could see if it is related to firewall??? sudo iptables -L 2018-03-23 10:00 GMT-04:00 Steve Zingman <szingman(a)msgstor.com>: > It may be a firewall issue. I'll copy Nate on this. > > On 3/22/2018 3:53 PM, KB7YS-Stacey wrote: > > Final issue I will bring up for a while (I hope, but can't promise): > > On the Acer Aspire One I installed on I added the wlan adapter to the > interfaces file: > > # wireless adapter with dhcp > auto wlp2s0 > iface wlp2s0 inet dhcp > wpa-ssid myssid > wpa-key-mgmt WPA-PSK > wpa-group TKIP CCMP > wpa-psk mypasskey > > After doing this I ran across the script in the asl-menu for setting up > wireless and ran it - it looked like it added info to the wpa.supplicant (I > verified it's all info was correct). > > Ok, so here is the issue - the wlan connects and gets proper addresses and > dns - I can ping anything and get responses, I can ssh to other systems on > my network, there seems to be no problem with bi-directional communications > *if* originated from the system. The same cannot be said for incoming - no > ping response, no ssh, apparently nothing connects when coming in. > > I don't think it's an issue with the adapter or driver, also it was > working (after manually adding to interfaces) on the previous image. I am > not sure where to start but hoping someone can help direct my focus and > efforts. > > Thanks again! > Stacey - KB7YS > > > _______________________________________________ > App_rpt-users mailing listApp_rpt-users@lists.allstarlink.orghttp://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. > > > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit http://lists.allstarlink.org/ > cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of > the page. Enter your email address and press the "Unsubscribe or edit > options button" > You do not need a password to unsubscribe, you can do it via email > confirmation. If you have trouble unsubscribing, please send a message to > the list detailing the problem. >

3 2

Ecgolibk timeout setting
by ARS W5OMR 28 Mar '18

28 Mar '18

In echolink.conf is a line that sets the timeout setting for non-activity. I'm a hotshot driver and all over the country, at any given time. I'd like to disable the timer. Would a setting of 0 do that? Or, can I just comment that field out? Thanks. Geoff (aprs.fi/w5omr-14)

1 0