- App_rpt-users - lists.keekles.org

DNS Setup
by Bob Pyke 04 Nov '17

04 Nov '17

I’m attempting to use netsetup to update/change the DNS in DIAL. When I’m finished, I check resolv.conf, and it is correct, but when I reboot, it goes away, leaving a note “# Generated by resolvconf” I’ve attempted to use resolvconf, and have placed “dns-nameserver 8.8.8.8 8.8.4.4” in /etc/network/interfaces without success. Perhaps I’m using it incorrectly. Looking for advice. Thanks, Bob K6ECM 73

2 1

Private Nodes / System
by Michael "Lee" Lockwood 02 Nov '17

02 Nov '17

I have a few repeaters that are linked using app_rpt that are on a private network (but use Internet for connectivity). I'd like to disable all functions of the Allstar Link system for these nodes. Primarily, I don't want the nodes creating unnecessary network traffic and using resources from Allstar Link servers that they don't need to be. Can someone provide me with a list of all CRON jobs, scripts, files, etc. that I should modify to completely have these nodes standalone, and not getting any sort of updates from the Allstar Link servers whatsoever please?

4 4

Re: [App_rpt-users] Nodes on same server linked, but not repeating audio
by Tom 02 Nov '17

02 Nov '17

Bryan, I think we are saying the same thing: Each server in a LAN subnet must have a separate port; but all nodes on a given server use the one server UDP port. Of course each server is on a different IP. Jeremy, if you are having issues between nodes on the same LAN, try using the LAN IPs in the [NODES] stanza instead of the loop back 127.0.01. K5TRA

4 4

Nodes on same server linked, but not repeating audio?
by Bryan Fields 01 Nov '17

01 Nov '17

I have 3 nodes on the same server, and have seen this behavior before, and it's happening now again. My node 40821, 41618, 420 are linked and report as linked, but a user on one doesn't bring the other up and vice versa. A restart will clear it, but is there any troubleshooting I can do to debug this problem? Thanks, -- Bryan Fields 727-409-1194 - Voice http://bryanfields.net

5 9

Help on using CTCSS with usbradio.conf
by Neil H. Gray 01 Nov '17

01 Nov '17

To Whom It May Concern, I am trying to get a DMK URIx working with a BridgeCOM repeater using the usbradio.conf to provide CTCSS decode/encode and am having no success. I can confirm that a received FM signals get repeated, and the allstar configuration also appears to be working. However any configuration related to CTCSS does not work at all. I can confirm that the CTCSS tone is present with the input audio being fed to the URIx, but none of the relevant settings in usbradio.conf(e.g. rxctcssfreqs, ctcssfrom = dsp) seem to have any effect. Adjusting the carrierfrom parameter in usbradio.conf has the expected results. The COR signal comes to the URIx from the repeater and functions correctly with carrierfrom set to usbinvert. At least with this I can confirm that apt_rpt is using usbradio.conf rather than simpleusb.conf. While I have tested the hardware, I have not tried looking at the software beyond glancing through the source code to get a rough idea of the layout of apt_rpt. Could anyone offer a working configuration example on CTCSS, or perhaps give debugging hints? I can handle a debugger but am not sure of a good way to debug a program that operates on signals in real time. Thanks in advance, Neil

3 3

Systemctl --failed
by Benjamin Naber 29 Oct '17

29 Oct '17

So an adventure I embarked on this evening was to investigate how to prevent an OS service from putting the ASL laptop to 'suspend' when the lid was closed. I came across systemctl, which can be very dangerous, haha. Poking around, I learned how to view the status of "things", and was looking to see what *may* be running that would suspend the laptop when the lid was closed. $systemctl status I saw "System State = Degraded" in red letters. Interesting! I didn't see what was causing the degraded state, so more reading lead to the use of the command $systemctl --failed which revealed something that I was not wanting to see: updatenodelist.service (or something like that) Given that I haven't fooled with any of the bootup stuff, or anything relating to updatenodelist, but aware that this service is used with ASL, so I used the following command to stop $systemctl stop updatenodelist.service and then started with the following $systemctl start updatenodelist.service and then $systemctl status "System State - running" So ADD got the best of me, and jumped off the track off. Bah! Curious though, anyone else with mad Linux skillz, running an ASL box, ever make the same discovery? You get one point if was also by 'accident' For those who want to know, the ASL box has been running for five-ish days, and before poking around for 'suspend' stuff, I was fooling around with iax.conf and rpt.conf and restarted asterisk by $service asterisk stop && service asterisk start and some other stuff I was fooling around with, but elected to reload the app_rpt module is the Asterisk console KB9LFZ-1*CLI> module reload app_rpt.so this said, asterisk was restarted a few times *before* fooling around with systemctl...So, is updatenodelist NOT related/hooked to asterisk starting/stopping? Not sure if I am asking about a issue or just openly stating an observation that..... could be an issue? ~Benjamin, KB9LFZ

1 0

AllStar - Incoming/Outgoing EchoLink connections not possible
by Shaun Rudling 28 Oct '17

28 Oct '17

Hi All, after so many years (installed 2011) of using the AllStar system flawlessly, now the EchoLink side of it has stopped. I see this error when someone tries to connect... "Connected to Asterisk currently running on hub (pid = 2110) Verbosity is at least 3 [Oct 27 17:54:41] ERROR[2221]: chan_echolink.c:2578 do_new_call: Cannot find DB entry for IP addr 107.23.146.139 [Oct 27 17:54:42] ERROR[2221]: chan_echolink.c:2578 do_new_call: Cannot find DB entry for IP addr 107.23.146.139 [Oct 27 17:54:44] ERROR[2221]: chan_echolink.c:2578 do_new_call: Cannot find DB entry for IP addr 107.23.146.139 [Oct 27 17:54:46] ERROR[2221]: chan_echolink.c:2578 do_new_call: Cannot find DB entry for IP addr 107.23.146.139" I can't think of anything that has changed on my network, or router. AS node 28052 EL node 244279 ZS5PMB-R Is anyone able to assist please? We can even pay for your time if necessary. Teamviewer session? Shaun ZR5S

2 3

URI w/ or w/o EEPROM?
by Bob Pyke 27 Oct '17

27 Oct '17

What are the advantages of using the URI EEPROM or not using it with DIAL and the RPi? Thanks, Bob K6ECM Sent from my iPhone

2 2

Kenwood TKR-820
by A 27 Oct '17

27 Oct '17

Hello All, Does anyone have the wiring for the Kenwood TKR-820 to the URI?? If you also have the setting/file for the USBRADIO/SIMPLEUSB, I would appreciate it. 73 de Angelo

4 5

RTCM RSSI calibration (recorder)
by Hayden Honeywood 26 Oct '17

26 Oct '17

I ran the script a few times without the file path and they didn't appear anywhere. I searched the whole Pi using WinSCP with *voter* as a wildcard. Either way, I do have the issue whereby my SD card in the Pi is Read Only. There are tmpfs for /tmp etc but they are very small as the Pi3 still only has 1GB of RAM. I'm going to use a 16 or 32GB flash drive, mount it and save to that. I'll see how long it takes to fill up, and maybe delete some of the older files when it needs to be cleaned up. I did see the archivedir function in rpt.conf which logs and records all traffic (including link) but I was more interested in seeing how the voter performs. Yes, I've had a few microSD cards fail lately, most of them in a dashcam in my vehicle which overwrites the old files and writes every 5 mins. I've since gotten a larger SD card, and set the clip lengths to 10 mins. In the Pi's I use 16GB to help spread out the amount of writes, but being Read Only should help.

1 0