- App_rpt-users - lists.keekles.org

Re: [App_rpt-users] AllStarLink apt-get install
by Steve Zingman 16 Nov '17

16 Nov '17

We can give it a try. I'll be happy to troubleshoot it. Steve On 11/15/2017 07:34 PM, Will Bashlor wrote: > This is on an RPi Zero W if that makes a difference. I hope it doesn’t. > > I know AllStar is not suppose to run well on Zero, but I want to try it and monitor CPU, memory, and other resources. > > Sent from my iPhone > >> On Nov 15, 2017, at 7:27 PM, Steve Zingman <szingman(a)msgstor.com> wrote: >> >> This may not be clear since the reboot is hanging out at the end. I'm rerunning on Raspbian Stretch now. >> >> Steve >> >>> On 11/15/2017 07:21 PM, Will Bashlor wrote: >>> When the install completes (yes it does take a while since DAHDI still has to be compiled) reboot.

1 0

astdb.php question
by jimmy keffer 15 Nov '17

15 Nov '17

on my dial x86 server running 5 3 * * * /var/www/html/allmon2/astdb.php from root's cron wass causing the file astdb.txt to saved in /root not /var/www/html/allmon2 i fixed it by adding 7 3 * * * mv -f /root/astdb.txt/var/www/html/allmon2 too cron has anyone seen this before ? is there a better way to do this thanks jimmy ka3vgm

5 6

iPhone Verizon Hot Spot Issues
by Will Bashlor 15 Nov '17

15 Nov '17

Hi All, Anyone use their iPhone hot spot on Verizon? Any issues? Mine gives me a fit not wanting to connect to most any node (mine and others) most of the time. After constantly rebooting my node and phone several times, and retrying to connect to various nodes, sometimes it’s eventually successful. Any similar experiences? Suggestions? 73 Will, KE4IAJ TARG <https://www.facebook.com/profile.php?id=196073504193006&ref=br_rs> AEC

6 10

(no subject)
by Sam Nabkey 13 Nov '17

13 Nov '17

Ooo9pp09 999qlllp

1 1

Node control
by john＠n2yp.com 13 Nov '17

13 Nov '17

Is there a way to have node A decode dtmf and have it control the gpio pins of a second node? -- Sent from my Android device with K-9 Mail. Please excuse my brevity.

2 1

allstarlink.org logs
by Benjamin Naber 12 Nov '17

12 Nov '17

While trying to figure out why, apparently, a node on my DIAL box dropped all of it's connection, I began to wonder what the logs look like on the register.allstarlink.org server. How may a controlled few of us have access to this? What lead me up to this, is evidently I don't have log rotate turned on, and asterisk, or some other magical force, decided to stop asterisk from logging after the log file was 25MB. Not knowing if Asterisk logger just appends the file with logging info or what. In any event, I copied the messages log file, and removed the original, and touched a new messages log. Then I went into the asterisk console, and restarted the logger module. It is logging again. This said, while trying to troubleshoot things, I would login to an ASL box I have access to, and watch the logs when I make a node connection to it, and also watch the logs on myside. Somethings I have noticed: - Using DIAL 8.2, I've never noticed any issues with connections, either outbound or inbound. - Using DIAL 8.2, this is what I would see: [Nov 11 21:26:30] WARNING[545]: chan_iax2.c:10127 iax2_do_register: REGISTER-LOG: Sending registration request for '45221' [Nov 11 21:26:31] WARNING[553]: chan_iax2.c:7690 registry_rerequest: REGISTER-LOG: registry rereqquest (from memory) REGISTER with 67.x.x.x who sees us as x.x.x.x:4569 with no messages waiting. - I see now when someone connects: Accepting UNAUTHENTICATED call from 67.215.233.178: > requested format = slin, > requested prefs = (), > actual format = ulaw, > host prefs = (ulaw|g726aal2|gsm), > priority = mine -- Executing [45221@radio-secure:1] Rpt("IAX2/67.215.233.178:4569- 5735", "45221") in new stack whereas before it was: AUTHENTICATED Plus I see a whole bunch of these every few minutes (this is maybe 1/3 count of these lines when it happens. notice the time. [Oct 28 21:57:04] DEBUG[24946] channel.c: Internal timing is disabled (option_internal_timing=0 chan->timingfd=51) [Oct 28 21:57:04] DEBUG[24946] channel.c: Internal timing is disabled (option_internal_timing=0 chan->timingfd=51) [Oct 28 21:57:04] DEBUG[24946] channel.c: Internal timing is disabled (option_internal_timing=0 chan->timingfd=51) [Oct 28 21:57:04] DEBUG[24946] channel.c: Internal timing is disabled (option_internal_timing=0 chan->timingfd=51) [Oct 28 21:57:04] DEBUG[24946] channel.c: Internal timing is disabled (option_internal_timing=0 chan->timingfd=51) [Oct 28 21:57:04] DEBUG[24946] channel.c: Internal timing is disabled (option_internal_timing=0 chan->timingfd=51) [Oct 28 21:57:04] DEBUG[24946] channel.c: Internal timing is disabled (option_internal_timing=0 chan->timingfd=51) [Oct 28 21:57:04] DEBUG[24946] channel.c: Internal timing is disabled (option_internal_timing=0 chan->timingfd=51) [Oct 28 21:57:04] DEBUG[24946] channel.c: Internal timing is disabled (option_internal_timing=0 chan->timingfd=51) [Oct 28 21:57:04] DEBUG[24946] channel.c: Internal timing is disabled (option_internal_timing=0 chan->timingfd=51) [Oct 28 21:57:04] DEBUG[24946] channel.c: Internal timing is disabled (option_internal_timing=0 chan->timingfd=51) [Oct 28 21:57:04] DEBUG[24946] channel.c: Internal timing is disabled (option_internal_timing=0 chan->timingfd=51) [Oct 28 21:57:04] DEBUG[24946] channel.c: Internal timing is disabled (option_internal_timing=0 chan->timingfd=51) [Oct 28 21:57:04] DEBUG[24946] channel.c: Internal timing is disabled (option_internal_timing=0 chan->timingfd=51) [Oct 28 21:57:04] DEBUG[24946] channel.c: Internal timing is disabled (option_internal_timing=0 chan->timingfd=51)

5 6

Pi Zero W?
by William Higgins 12 Nov '17

12 Nov '17

I have tried using the regular DIAL RAT_RC1 image and it doesn't boot. (Just took a shot.) Has anyone tried to install the DIAL build of Allstar onto a Raspberry Pi Zero W with regular Raspbian Light on it? What experiences did you have? Thinking about a very low power mobile node. Bill

6 7

Re: [App_rpt-users] Nodes on same server linked, but not repeating audio?
by Tom 07 Nov '17

07 Nov '17

Jeremy, Each server in a LAN subnet must have a separate port; but all nodes on a given server use the one server UDP port. If you are having issues between nodes on the same LAN, try using the LAN IPs in the [NODES] stanza instead of the loop back 127.0.01. K5TRA

6 11

Remote reinstall..... Ideas..
by Loren Tedford 07 Nov '17

07 Nov '17

Hello I know you can do a rm -R / and completely remove everything on the hard drive remotely and the system will stay up until reboot because i have done this a few times.. Just curious though if its possible to remote reinstall asterisk from the scripts that dial uses? Example dial installation script etc and data etc.. idk just thinking about situations where i might need a hard reset of everything and it would be nice to be able to send some dtmf and do complete restore remotely or ssh in and do a complete restore etc.. Of course i would have to modify things a bit to keep my vpns and stuff in the system but it might be worth a shot.. Just thinking.. *************************************************** CONFIDENTIALITY NOTICE: Confidential information, such as identifiable patient health information or business information, is subject to protection under state and federal law. If you are not the intended recipient of this message, you may not disclose, print, copy or disseminate this information. If you have received this in error, please reply and notify the sender (only) and delete the message. Unauthorized interception of this e-mail is a violation of federal criminal law. **************************************************

4 3

Re: [App_rpt-users] Remote reinstall..... Ideas.. (Bryan Taylor)
by Pawlowski, Adam 06 Nov '17

06 Nov '17

Some of the embedded/junk devices I have worked with in the past treat the system image like a default item that gets expanded into memory when the system boots. So, you could take a base system image of whatever unix flavor you were dealing with and it would always be whatever that was, expanded into memory. At that point you would need to store your configuration files somewhere else so that it can load them. Possibly, you could network boot the appliance as well so that it loaded a strap image and came up via an image housed elsewhere. That presents some problem when you do that, namely in that the configuration for the system has to be somewhere where you can get at it, or you've rebooted to an image that doesn't do you anything. Of course this depends on when you'd want to do this or why - in the case of appliances I've worked with it has been because you want the base image of the system to be a known item, and only selected things are user configurable. I'm not sure that applies here to the majority of app_rpt users but that would certainly be easy-mode. As well there isn't usually a use case to revert the system back to default but in the case of commercial equipment that has one purpose maybe you do want to reset it to something other than a brick. Driving around to issue DTMF or rcon commands into the unit resulting in it rebooting doesn't really make sense. What is the use case?

1 0