November 2011 - App_rpt-users - lists.keekles.org

Re: [App_rpt-users] Echolink
by Tim Sawyer 27 Nov '11

27 Nov '11

Sorry for the slow response, I've been out of town. Put telemdefault=2 under your node stanza, not the telemetry stanza. ie... [1999] telemdefault=2 -- Tim :wq On Nov 25, 2011, at 4:12 AM, Lu Vencl wrote: > Ok, I thing I understand. > So I put this in under my current telemetry entry > [telemetry] > telemdefault=2 > It however does not seem to work according to the value specified in the > docs.. > > But it seems like it broke my courtesy beeps configuration now oddly enough. > > -----Original Message----- > From: Tim Sawyer [mailto:tim.sawyer@me.com] > Sent: Friday, November 25, 2011 1:13 AM > To: Lu Vencl; App_rpt-users(a)ohnosec.org list > Subject: Re: [App_rpt-users] Echolink > > No, not just anywhere. Stanzas are parts of an Asterisk file denoted by > square brackets []. See http://ohnosec.org/drupal/node/39 > > So, the node stanza is the part of the rpt.conf file after [your node > number] and before the next set of square brackets. > > Hope that helps. Have a Happy Thanksgiving. > -- > Tim > :wq > > On Nov 24, 2011, at 10:20 AM, Lu Vencl wrote: > >> Tim. Sorry I guess I am not well educated in this. So I just add a line > anywhere in the file? >> Happy Thanksgiving >> >> Sent from my iPhone, Lu Vencl >> >> On Nov 24, 2011, at 11:51 AM, Tim Sawyer <tim.sawyer(a)me.com> wrote: >> >>> You'll need to add it to the node stanza of rpt.conf. >>> -- >>> Tim >>> :wq >>> >>> On Nov 24, 2011, at 2:29 AM, Lu Vencl wrote: >>> >>>> Tim, >>>> Thanks for the info.. Which conf file will I find this in? I looked in > rpt >>>> and could not find it. >>>> Thanks >>>> >>>> -----Original Message----- >>>> From: Tim Sawyer [mailto:tim.sawyer@me.com] >>>> Sent: Wednesday, November 23, 2011 10:06 AM >>>> To: Lu Vencl >>>> Cc: App_rpt-users(a)ohnosec.org list >>>> Subject: Re: [App_rpt-users] Echolink >>>> >>>> Sure. Take a look at this link. http://ohnosec.org/drupal/node/103 >>>> >>>> -- >>>> Tim >>>> :wq >>>> >>>> On Nov 23, 2011, at 3:17 AM, Lu Vencl wrote: >>>> >>>>> Hey Tim, >>>>> Did not know about this "timed telemetry". Can you tell me more about > it? >>>>> How do I set it up? >>>>> Thanks >>>>> Lu >>>>> KA4EPS >>>>> >>>>> -----Original Message----- >>>>> From: app_rpt-users-bounces(a)ohnosec.org >>>>> [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Tim Sawyer >>>>> Sent: Monday, November 21, 2011 9:32 PM >>>>> To: Matt Roberts >>>>> Cc: App_rpt-users(a)ohnosec.org >>>>> Subject: Re: [App_rpt-users] Echolink >>>>> >>>>> Timed telemetry will announce when you initiate a connection and for a >>>> short >>>>> time thereafter. Incoming connections are not announced except when one >>>>> happens to come in during the timeout period. >>>>> -- >>>>> Tim >>>>> :wq >>>>> >>>>> On Nov 21, 2011, at 11:40 AM, Matt Roberts wrote: >>>>> >>>>>> If I don't want to have all Echolink incoming connections announced, > is >>>>> there a way to have outgoing connections announced? If I set Echolink >>>>> telemetry to timed, how does that work? >>>>>> >>>>>> Matt Roberts >>>>>> n9gmr(a)me.com >>>>>> >>>>>> Sent from my iPhone >>>>>> _______________________________________________ >>>>>> App_rpt-users mailing list >>>>>> App_rpt-users(a)ohnosec.org >>>>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users >>>>> >>>>> _______________________________________________ >>>>> App_rpt-users mailing list >>>>> App_rpt-users(a)ohnosec.org >>>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users >>>>> >>>> >>> >

1 0

cant download config files using portal
by neal Garbenis 27 Nov '11

27 Nov '11

I am trying to download the config files using the portal this is what I am getting any Ideas Downloading server ke7jiserver... /tmp/allstar-install/sysconf.sh: line 6: server: command not found Problem with Hostname specification! Allstar Link Portal Config Download Failed.. exiting I am using the acid distro Neal NG8Y

1 0

IAX Register
by Ramesh Dhami (VA3UV) 27 Nov '11

27 Nov '11

Hi Guys; Moved one of my boxes to a new site that uses OSPF routing. The host has allocated me with a static IP; I have my own Linksys router for firewall and port forwarding. Now the problem is that my Allstar nodes are reporting to the Allstar network with the incorrect IP address. Since that particular IP address does not have port 4569 open, my nodes do not show up on the Allstar status page. So, I'd like to try and force the IP that gets reported to the Allstar network. I was looking at the [general] stanza in the iax.conf file while looking at this reference: http://www.voip-info.org/wiki/view/Asterisk+config+iax.conf .. but unfortunately, the 'externip' parameter can not be used in the [general] stanza. Is there any other way that will allow me to force the 'external IP'? When I use iaxRpt from my notebook and spec' the correct IP / hostname, I can connect without an issue, which confirms that port 4569 is open on the 'correct' IP address. Appreciate some help with this one! Thanks, Ramesh. www.freestar.us

3 3

Parallel port on Xipar.
by Brian Burton 26 Nov '11

26 Nov '11

Sorry Tim XIPAR Does not at this time support parallel port use. -- Brian KB3ORS WAN-RS Tech Support

1 0

Re: [App_rpt-users] Echolink
by Tim Sawyer 25 Nov '11

25 Nov '11

No, not just anywhere. Stanzas are parts of an Asterisk file denoted by square brackets []. See http://ohnosec.org/drupal/node/39 So, the node stanza is the part of the rpt.conf file after [your node number] and before the next set of square brackets. Hope that helps. Have a Happy Thanksgiving. -- Tim :wq On Nov 24, 2011, at 10:20 AM, Lu Vencl wrote: > Tim. Sorry I guess I am not well educated in this. So I just add a line anywhere in the file? > Happy Thanksgiving > > Sent from my iPhone, Lu Vencl > > On Nov 24, 2011, at 11:51 AM, Tim Sawyer <tim.sawyer(a)me.com> wrote: > >> You'll need to add it to the node stanza of rpt.conf. >> -- >> Tim >> :wq >> >> On Nov 24, 2011, at 2:29 AM, Lu Vencl wrote: >> >>> Tim, >>> Thanks for the info.. Which conf file will I find this in? I looked in rpt >>> and could not find it. >>> Thanks >>> >>> -----Original Message----- >>> From: Tim Sawyer [mailto:tim.sawyer@me.com] >>> Sent: Wednesday, November 23, 2011 10:06 AM >>> To: Lu Vencl >>> Cc: App_rpt-users(a)ohnosec.org list >>> Subject: Re: [App_rpt-users] Echolink >>> >>> Sure. Take a look at this link. http://ohnosec.org/drupal/node/103 >>> >>> -- >>> Tim >>> :wq >>> >>> On Nov 23, 2011, at 3:17 AM, Lu Vencl wrote: >>> >>>> Hey Tim, >>>> Did not know about this "timed telemetry". Can you tell me more about it? >>>> How do I set it up? >>>> Thanks >>>> Lu >>>> KA4EPS >>>> >>>> -----Original Message----- >>>> From: app_rpt-users-bounces(a)ohnosec.org >>>> [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Tim Sawyer >>>> Sent: Monday, November 21, 2011 9:32 PM >>>> To: Matt Roberts >>>> Cc: App_rpt-users(a)ohnosec.org >>>> Subject: Re: [App_rpt-users] Echolink >>>> >>>> Timed telemetry will announce when you initiate a connection and for a >>> short >>>> time thereafter. Incoming connections are not announced except when one >>>> happens to come in during the timeout period. >>>> -- >>>> Tim >>>> :wq >>>> >>>> On Nov 21, 2011, at 11:40 AM, Matt Roberts wrote: >>>> >>>>> If I don't want to have all Echolink incoming connections announced, is >>>> there a way to have outgoing connections announced? If I set Echolink >>>> telemetry to timed, how does that work? >>>>> >>>>> Matt Roberts >>>>> n9gmr(a)me.com >>>>> >>>>> Sent from my iPhone >>>>> _______________________________________________ >>>>> App_rpt-users mailing list >>>>> App_rpt-users(a)ohnosec.org >>>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users >>>> >>>> _______________________________________________ >>>> App_rpt-users mailing list >>>> App_rpt-users(a)ohnosec.org >>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users >>>> >>> >>

1 0

Parallel Port PTT in Xipar
by Carl Davies 24 Nov '11

24 Nov '11

Hi everyone, A couple of months ago I asked how to use the parallel port for PTT, I quickly found this information at http://ohnosec.org/drupal/node/177 I have now built a new PC to run my Allstar system using the Xipar version of software (build 188) but the parallel port doesn't seem to function. Can anyone confirm if the parallel port is supported in Xipar or is it just in the Acid version? I really would prefer to use Xipar as the FreePBX package is quite handy. Best Regards Carl M1ELR

1 0

Re: [App_rpt-users] Echolink
by Tim Sawyer 24 Nov '11

24 Nov '11

You'll need to add it to the node stanza of rpt.conf. -- Tim :wq On Nov 24, 2011, at 2:29 AM, Lu Vencl wrote: > Tim, > Thanks for the info.. Which conf file will I find this in? I looked in rpt > and could not find it. > Thanks > > -----Original Message----- > From: Tim Sawyer [mailto:tim.sawyer@me.com] > Sent: Wednesday, November 23, 2011 10:06 AM > To: Lu Vencl > Cc: App_rpt-users(a)ohnosec.org list > Subject: Re: [App_rpt-users] Echolink > > Sure. Take a look at this link. http://ohnosec.org/drupal/node/103 > > -- > Tim > :wq > > On Nov 23, 2011, at 3:17 AM, Lu Vencl wrote: > >> Hey Tim, >> Did not know about this "timed telemetry". Can you tell me more about it? >> How do I set it up? >> Thanks >> Lu >> KA4EPS >> >> -----Original Message----- >> From: app_rpt-users-bounces(a)ohnosec.org >> [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Tim Sawyer >> Sent: Monday, November 21, 2011 9:32 PM >> To: Matt Roberts >> Cc: App_rpt-users(a)ohnosec.org >> Subject: Re: [App_rpt-users] Echolink >> >> Timed telemetry will announce when you initiate a connection and for a > short >> time thereafter. Incoming connections are not announced except when one >> happens to come in during the timeout period. >> -- >> Tim >> :wq >> >> On Nov 21, 2011, at 11:40 AM, Matt Roberts wrote: >> >>> If I don't want to have all Echolink incoming connections announced, is >> there a way to have outgoing connections announced? If I set Echolink >> telemetry to timed, how does that work? >>> >>> Matt Roberts >>> n9gmr(a)me.com >>> >>> Sent from my iPhone >>> _______________________________________________ >>> App_rpt-users mailing list >>> App_rpt-users(a)ohnosec.org >>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users >> >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users(a)ohnosec.org >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users >> >

1 0

Zaptel modified for newer kernels & IOCTL issues.
by Ken Page 24 Nov '11

24 Nov '11

I've had some of the Zaptel code re-written to cope with the newer kernels and IOCTL issues and also some udev stuff. If anyone is interested in having a play with it you can get the patch off my server here. http://shazam.zapto.org/temp/zaptel.patch As per the normal warnings. Use at your own risk. However I'd be interested to hear how people go with it. I found this quiet a hurdle when updating our server here to the latest Gentoo Linux distro. Ken - vk4akp .-.-.

1 0

Re: [App_rpt-users] Echolink
by Tim Sawyer 23 Nov '11

23 Nov '11

Sure. Take a look at this link. http://ohnosec.org/drupal/node/103 -- Tim :wq On Nov 23, 2011, at 3:17 AM, Lu Vencl wrote: > Hey Tim, > Did not know about this "timed telemetry". Can you tell me more about it? > How do I set it up? > Thanks > Lu > KA4EPS > > -----Original Message----- > From: app_rpt-users-bounces(a)ohnosec.org > [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Tim Sawyer > Sent: Monday, November 21, 2011 9:32 PM > To: Matt Roberts > Cc: App_rpt-users(a)ohnosec.org > Subject: Re: [App_rpt-users] Echolink > > Timed telemetry will announce when you initiate a connection and for a short > time thereafter. Incoming connections are not announced except when one > happens to come in during the timeout period. > -- > Tim > :wq > > On Nov 21, 2011, at 11:40 AM, Matt Roberts wrote: > >> If I don't want to have all Echolink incoming connections announced, is > there a way to have outgoing connections announced? If I set Echolink > telemetry to timed, how does that work? >> >> Matt Roberts >> n9gmr(a)me.com >> >> Sent from my iPhone >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users(a)ohnosec.org >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users >

1 0

Re: [App_rpt-users] SVN app_rpt compile fails
by Dwaine Garden VE3GIF 23 Nov '11

23 Nov '11

Where is NEW_ASTERISK defined? There is no reason why I have it defined. Dwaine ________________________________ From: Dwaine Garden VE3GIF <dwainegarden(a)rogers.com> To: Dwaine Garden VE3GIF <dwainegarden(a)rogers.com> Sent: Wednesday, November 23, 2011 12:03:22 AM Subject: Re: [App_rpt-users] SVN app_rpt compile fails Where is NEW_ASTERISK defined? There is no reason I have it defined. ________________________________ From: Dwaine Garden VE3GIF <dwainegarden(a)rogers.com> To: "app_rpt-users(a)ohnosec.org" <app_rpt-users(a)ohnosec.org> Sent: Tuesday, November 22, 2011 9:07:14 PM Subject: [App_rpt-users] SVN app_rpt compile fails I'm getting a compile error when trying to compile SVN. I can compile most of SVN, but it fails on app_rpt. Anyone seen this problem? [root@AsteriskServer asterisk]# make menuselect/menuselect --check-deps menuselect.makeopts Generating embedded module rules ... make[1]: Entering directory `/usr/src/trunk/asterisk/utils' make[1]: Nothing to be done for `all'. make[1]: Leaving directory `/usr/src/trunk/asterisk/utils' make[1]: Entering directory `/usr/src/trunk/asterisk/agi' make[1]: Nothing to be done for `all'. make[1]: Leaving directory `/usr/src/trunk/asterisk/agi' make[1]: Entering directory `/usr/src/trunk/asterisk/res' make[1]: Nothing to be done for `all'. make[1]: Leaving directory `/usr/src/trunk/asterisk/res' make[1]: Entering directory `/usr/src/trunk/asterisk/channels' make[1]: Nothing to be done for `all'. make[1]: Leaving directory `/usr/src/trunk/asterisk/channels' make[1]: Entering directory `/usr/src/trunk/asterisk/pbx' make[1]: Nothing to be done for `all'. make[1]: Leaving directory `/usr/src/trunk/asterisk/pbx' make[1]: Entering directory `/usr/src/trunk/asterisk/apps' [CC] app_rpt.c -> app_rpt.o app_rpt.c:542: error: âCONFIG_FLAG_WITHCOMMENTSâ undeclared here (not in a function) app_rpt.c: In function âuchameleon_pin_initâ: app_rpt.c:2598: error: too many arguments to function âast_config_loadâ app_rpt.c: In function âdo_dtmf_phoneâ: app_rpt.c:4367: error: too many arguments to function âast_senddigitâ app_rpt.c: In function âdo_dtmf_localâ: app_rpt.c:4435: error: too many arguments to function âast_senddigitâ app_rpt.c: In function âsend_usb_txtâ: app_rpt.c:4977: error: request for member âptrâ in something not a structure or union app_rpt.c: In function âsend_link_plâ: app_rpt.c:5000: error: request for member âptrâ in something not a structure or union app_rpt.c: In function ânode_lookupâ: app_rpt.c:5577: error: too many arguments to function âast_config_loadâ app_rpt.c: In function âforward_node_lookupâ: app_rpt.c:5650: error: too many arguments to function âast_config_loadâ app_rpt.c: At top level: app_rpt.c:5790: warning: âstruct ast_tmâ declared inside parameter list app_rpt.c:5790: warning: its scope is only this definition or declaration, which is probably not what you want app_rpt.c: In function ârpt_localtimeâ: app_rpt.c:5796: warning: passing argument 1 of âast_localtimeâ from incompatible pointer type app_rpt.c:5796: warning: passing argument 2 of âast_localtimeâ from incompatible pointer type app_rpt.c: In function âload_rpt_varsâ: app_rpt.c:5858: error: too many arguments to function âast_config_loadâ make[1]: *** wait: No child processes. Stop. make[1]: *** Waiting for unfinished jobs.... make[1]: *** wait: No child processes. Stop. make: *** wait: No child processes. Stop. make: *** Waiting for unfinished jobs.... make: *** wait: No child processes. Stop. [root@AsteriskServer asterisk]# [root@AsteriskServer asterisk]# [root@AsteriskServer asterisk]# [root@AsteriskServer asterisk]# _______________________________________________ App_rpt-users mailing list App_rpt-users(a)ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

2 1