April 2011 - App_rpt-users - lists.keekles.org

IAX access to app_rpt on Android phone
by GARY BONEBRAKE 25 Apr '11

25 Apr '11

Been using IaxRpt on PC to access our repeaters - works great. Would like to do same thing on my new Android phone. I found IaxAgent for Android, but it won't register with Asterisk/app_rpt. (Not sure what I'd do next if it DID register!) I get "No registration for peer 'w5bi' (from 166.250.66.101)". I'm kinda new to this technology, so please help if possible. Gary W5BI Emergency Coordinator Sandoval County ARES <mailto:w5bi@arrl.net> w5bi(a)nmscares.org

1 0

Getting Started???
by K0YR Thomas Rieff 25 Apr '11

25 Apr '11

App_rpt Users... I would like to use our existing asterisk phone system between the cabin, office and house to link a local radio, with repeater frequencies to the cabin in Pine City. What is the best way to get started on something like this??? Tom K0YR Thomas Rieff North Mankato, MN 56001 (507) 381-0660 Cell

1 0

Re: [App_rpt-users] App_rpt-users Digest, Vol 26, Issue 24
by randy 25 Apr '11

25 Apr '11

The Intel D945GSEJT <http://downloadmirror.intel.com/17597/eng/D945GSEJT_TechProdSpec.pdf> is my favorite all-in-one board. It runs off of 12vdc, has an Atom processor, sips current, has a max case temp of 85 deg C (185F) and has provisions for on-board wireless 802.11g and SSD. It is a mini-ITX configuration so it fits in small places. You can find them on ebay for about $95. I have PBX in a flash running on one in an M350 case, and another one in my go-box rack <http://www.fivebynine.com/?p=217> about to be turned into an Asterisk repeater controller in a 1U rack enclosure. The Intel D945 series are available in many flavors some with dual core processors if you need more horsepower. On 4/25/2011 9:00 AM, app_rpt-users-request(a)ohnosec.org wrote: > Send App_rpt-users mailing list submissions to > app_rpt-users(a)ohnosec.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > or, via email, send a message with subject or body 'help' to > app_rpt-users-request(a)ohnosec.org > > You can reach the person managing the list at > app_rpt-users-owner(a)ohnosec.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of App_rpt-users digest..." > > > Today's Topics: > > 1. Computer suggestions? (James Nessen) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Sun, 24 Apr 2011 21:17:17 -0700 > From: James Nessen<nessenj(a)jimsoffice.org> > To: app_rpt-users(a)ohnosec.org > Subject: [App_rpt-users] Computer suggestions? > Message-ID:<4DB4F5CD.20402(a)jimsoffice.org> > Content-Type: text/plain; charset=ISO-8859-1; format=flowed > > I am looking to co-locate an allstar node with a newly purchased > repeater, however... > > The repeater site isn't real computer friendly, I hear that it gets hot > in the summer time, up to possibly 110-120 degrees F and the site has > vents to allow some airflow (but doesn't have A/C). > > I am looking at possibly something fan less with a CF card to keep the # > of moving parts down, but I am a little worried about the heat. My > other option is to install a RF link from the repeater site to my house > and leave the computer in a cooled location (but where is the fun in that?) > > Suggestions welcome! > > Thanks! > > Jim, K6JWN > > > ------------------------------ > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > > End of App_rpt-users Digest, Vol 26, Issue 24 > *********************************************

1 0

Computer suggestions?
by James Nessen 25 Apr '11

25 Apr '11

I am looking to co-locate an allstar node with a newly purchased repeater, however... The repeater site isn't real computer friendly, I hear that it gets hot in the summer time, up to possibly 110-120 degrees F and the site has vents to allow some airflow (but doesn't have A/C). I am looking at possibly something fan less with a CF card to keep the # of moving parts down, but I am a little worried about the heat. My other option is to install a RF link from the repeater site to my house and leave the computer in a cooled location (but where is the fun in that?) Suggestions welcome! Thanks! Jim, K6JWN

1 0

Re: [App_rpt-users] Telemetry bug?.. in morse section too. restart fixes
by Don Russell 25 Apr '11

25 Apr '11

are you just doing an rpt reload? I found the morse section was doing the same thing, until I stopped and restarted asterisk. The morse section was being ignored until a full restart. -- Don Russell, CBRE CBNT W9DRR - ARRL OES, Technical Specialist http://www.socialengineer.us

2 1

asterisk constant disk activity.
by Don Russell 24 Apr '11

24 Apr '11

Anyone ever see asterisk/app_rpt using around 200-300 K/s constantly. Not sure what/where it is writing. nothing streaming to the logs or console at that rate. this is per iotop. The journal for ext4 was the top process. 2nd was asterisk. Asterisk is only using maybe 10% of the cpu at max, average around 5-6%. The IO doesn't stop until I kill asterisk. It's not zombie or anything and is responding properly. OS: Ubuntu 10.10 32bit ext4. Wondering if it's ext4 related and it's not playing nice with asterisk. Thanks, -- Don Russell, CBRE CBNT W9DRR - ARRL OES, Technical Specialist http://www.socialengineer.us

2 1

Telemetry bug?
by Scott Weis 24 Apr '11

24 Apr '11

I am trying to set up separate telemetry stanzas for each repeater on the same computer. (4 total) I specify telemetry= in each node stanza and create a telemetry stanza to match. Only the stanza named telemetry works. If I name it anything else (like telemetry2) it uses the defaults from the app_rpt.c and kicks out this error: [Apr 24 16:44:05] WARNING[9736] app_rpt.c: telem_lookup:ctx failed on Zap/pseudo-1601063541 Can someone else out there try this and confirm the behavior? Thanks & 73, Scott KB2EAR

2 1

usb acid iso
by REDBUTTON_CTRL 24 Apr '11

24 Apr '11

Has anybody successfully put the acid iso on to a USB drive and get it to load via usb? Jon VA3RQ

1 0

Re: [App_rpt-users] Telemetry Audio Level
by k8khw 24 Apr '11

24 Apr '11

Hi Scott Thanks for the reply, We tried that and it fails with a Acid install for some reason. Randy

1 0

Telemetry Audio Level
by k8khw 24 Apr '11

24 Apr '11

Is there anyway to turn down the Audio Level on the Telemetry spoken on a Node using Acid. Randy

2 1