June 2011 - App_rpt-users - lists.keekles.org

Pingponging of a simplex node
by Bryan D. Boyle 02 Jun '11

02 Jun '11

I have a very simple simplex node...speaker out, mic in that's configured: > hdwtype=0 > rxboost=1 > txboost=0 > rxctcssrelax=1 > carrierfrom=vox > ctcssfrom=no > rxdemod=speaker > txprelim=no > txlimonly=no > txtoctype=no > txmixa=voice > txmixb=no > invertptt=0 > duplex=0 > rxondelay=25 > rxnoisefiltype=0 > eeprom=1 and the rpt.conf is configured with duplex=0....because, when I change it to a duplex=1, it sits there and bounces back and forth, keying up, dropping, then courtesy tones key it up, which causes it to key up again...ad nauseam. The stanza for the node in rpt.conf is: > rxchannel=Radio/usbxxxxx > duplex=0 > erxgain=-3 > etxgain=3 > scheduler=schedulexxxxx > morse=morsexxxx > macro=macroxxxx > functions=functionsxxxx > phone_functions=functionsxxxx > link_functions=functionsxxxx > telemetry=telemetry > wait_times=wait-times > context = radio > callerid = "WB0YLE Simplex" <xxxx> > idrecording=/var/lib/asterisk/sounds/wb0ylesimplex > accountcode=RADIO > hangtime=1000 > althangtime=1000 > totime=170000 > idtime=540000 > politeid=3000 > idtalkover=|iWB0YLE > unlinkedct=ct2 > remotect=ct3 > linkunkeyct=ct8 > unlinkedct=ct2 > nolocallinkct=0 > nounkeyct=0 > beaconing=0 it worked for a while with duplex=1...I rang out the cables, no shorts, etc. Hmmm...it works, after a fashion, with the duplex set to 0 in rpt.conf, but, no courtesy tones (I realize that you really don't need them for simplex, but, it's a nice to have...) Anyway, suggestions? Did I miss something (that's common...)? Thx all 73 Bryan WB0YLE Allstar 27294 27295 27710 Echolink WB0YLE-R Morrisville PA

4 8

1000th Allstar Link Node
by Jim Duuuude 02 Jun '11

02 Jun '11

Congratulations to Robert, KB8ZXE for being assigned the 1000th Allstar Link Node number. As a result, he won a free DMK Engineering URI. JIM, WB6NIL

2 1

Re: [App_rpt-users] Web transceiver?
by Doug Hutchison 01 Jun '11

01 Jun '11

Hello Ken, Thank you, yes both files exist. TXR works on other remote nodes as do normal connections. Is there an entry in one or other of these files which may be missing. Regards, D On 01/06/2011 6:02 PM, Ken wrote: > Do you have the required config in iax.conf *and* extensions.conf? > http://www.xelatec.com/xipar/node/89 > it works on my LAN > GL > Ken > > > > -----Original Message----- > From: Doug Hutchison <specialq.que(a)ntlworld.com> > To: app_rpt-users <app_rpt-users(a)ohnosec.org> > Sent: Wed, Jun 1, 2011 11:28 am > Subject: [App_rpt-users] Web transceiver? > > Is it possible to run the transceiver from a machine on the same lan? > > If so, what is needed to correct this error reported by the node machine > when a connect is attempted? > > NOTICE 6342 Chan_iax2,c : 9459 Socket process: Host xx.xx.xx.xx failed > to authenticate as allstar-public > > (IP address removed) > > Thank you, > Doug > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)ohnosec.org <mailto:App_rpt-users@ohnosec.org> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

2 1

Telemetry Announcements and ID
by KI6PSP (Ed) 01 Jun '11

01 Jun '11

Automated ARRL Audio News Playback, but the system doesn't ID over the transmission. It does ID once after the playback though. Thoughts, or areas to check in the configs? Also, Telemetry audio is not passed to Echolink stations. Is there a way to pass audio like an automated playback to connected Echolink Stations? -- KI6PSP (Ed)

3 3

Announcement Volume
by KI6PSP 01 Jun '11

01 Jun '11

How would I reduce the volume of announcements. When a QSO is in progress and another node connects, it overpowers the conversation. Ed KI6PSP

2 1

Web transceiver?
by Doug Hutchison 01 Jun '11

01 Jun '11

Is it possible to run the transceiver from a machine on the same lan? If so, what is needed to correct this error reported by the node machine when a connect is attempted? NOTICE 6342 Chan_iax2,c : 9459 Socket process: Host xx.xx.xx.xx failed to authenticate as allstar-public (IP address removed) Thank you, Doug

1 0

Link problem
by Doug Hutchison 01 Jun '11

01 Jun '11

The link from home page for Asterisk/app_rpt project <http://app-rpt.qrvc.com> -- Lots of good documenttion on the Asterisk app_rpt application app-rpt.qrvc.com fails, what is correct address please? Thank you, D

2 2